Ash Management Equipment For Energy Management
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 have developed a new Waste to Energy solution that utilises moving grate technology to provide a more consistent stream of waste fuel to power electricl generation 24/7. The i8-E35 has been designed from the ground up specifically for the waste to energy sector. It has been tested rigourously with a variety of RDF waste types to ensure optimum performance with a wide range of feedstocks ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The i8-CR2 has been designed as a medium sized cremulator. Featuring a larger loading vessel and stronger motor, the i8-CR2 has been well received by new and existing customers alike. The i8-CR2 can be used with any of our pet crematoriums such as the i8-PC1, i8-PC2, i8-55A and i8-500. Its large loading vessel means it is versatile enough for most small to medium sized operations. Designed and ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to produce energy from burning waste. This renewable energy solution is extremely popular and is constantly being enhanced. It can reduce the volume of waste to just 10% in bottom ash for most ...
-
PremiumManufactured by TransVit Energy Incorporated (TVI)based in USA
Islands and Resorts and remote sites present difficult challenges in clean and safe waste disposal. The Batch Gasifier can be sized for ocean transport, flown into very remote sites, or trucked in ready to operate with very little assembly. The system can even remain on a truck bed for portable ...
-
PremiumManufactured by TransVit Energy Incorporated (TVI)based in USA
This BATCH design is perfect for smaller applications. Each 10 ton chamber of this BATCH system is loaded full once per day, a 30 minute process. Thereafter, the chamber operates unattended and without disturbance of the waste pile for 23 hours. Emissions and ash quality are the best in the world. The white ash color shows close to 100% complete ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Severe water pollution cases, animal diseases, new virus strains and spread of infectious diseases are only few of the consequences of improper poultry waste treatment. Modern incineration is recognized as a most efficient solution for significant risk reduction in poultry waste ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Primarily employed within a stepped hearth configuration where the waste material is progressively propelled by a hydraulic ram through the different phases of combustion until it reaches the hot ash stage. At this point a refractory lined hydraulically operated ash ram loader will force the combusted ash remains from the primary chamber into an ash vestibule that is sealed by a gravity closed ...
-
PremiumManufactured by ERGAbased in TURKEY
Line for ferrous and nonferrous metal recovery from incineration bottom ...
-
Manufactured by EPA Technologies LLCbased in USA
Provides .3 MMBtu/hr combustion capacity: 30-50 lb/hr (14-23 kg/hr) of average HHV of 5000-8500 Btu/lb wastes. Batch Only Operation: 9-10 ft3 (208 L) per 4-6 hr. (Ships skid mounted & fully ...
-
Manufactured by EPA Technologies LLCbased in USA
Provides .5 MMBtu/hr combustion capacity: 55-85 lb/hr (25-39 kg/hr) of average HHV of 5000-8500 Btu/lb wastes. Batch Operation: .75 yd3 (.55 m3) per 4-6 hr. batch / Intermittent Feed: .5 yd3/hr (.38 m3/hr) up to 8 ...
-
Distributed by J.M. Power Aggregates Limitedbased in CANADA
In many jurisdictions, the use of coal cinders, bottom ash and clinkers has been banned. Natural Cinders is a new, proven STOPLEAK solution that quickly seals gates & stop logs and is environmentally friendly. To ensure optimum, repeatable performance, we have created a custom blend of this naturally occurring material that outperforms other ...
-
Manufactured by KLAW Industries LLC.based in USA
Pantheon™ is an ASTM-approved supplementary cementing material (SCM) like fly ash and slag that drops into your existing mixes, increasing the compressive strength and lowers the embodied carbon of your concrete. All while saving you money. Pantheon™ replaces 20% of cement in standard mixes and up to 50% in specialty applications. ...
-
Manufactured by Rivashaa Eco Design Solutions P. Ltd.based in INDIA
Understanding Your Options for Lightweight Aggregate. Need a lightweight aggregate supplier in India? Not sure if lightweight expanded clay aggregate is right for you, or if you should use another type of lightweight aggregate for the concrete mix? In this article, we’ll take a brief look at the most popular lightweight aggregate for concrete, and discuss which ones may be right for ...
-
by REMEX GmbHbased in GERMANY
HMT stands for hydro-mechanical treatment. By means of a washing plant, the environmental quality of the incinerator bottom ash aggregate is verifiably enhanced. The pollution levels are reduced as both the sludge fractions and light organic components are removed. The remaining sandy and coarse fraction is proportionally mixed and provided with an additive. The result is GRANOVA aggregate ...
-
Manufactured by Biomasa Forestal SLbased in SPAIN
The wood pellets Biomasa Forcstal SL are produced from locally harvested timber. We arc supplied by Spanish local forestry administrations. The Spanish forestry, by law, arc protected under the FSC® certification program. Remaining bark cannot be even burned in drying drum heater because smoke can contain ash and have impact on wood pellet quality. The logs arc made into sawdust locally with ...
-
Manufactured by Igniss Energybased in POLAND
Material recovery is a source of income for an incinerator. The recovered materials are mostly in the ash of the combustion chamber, or in the flue gas. The evaporation temperature and the melting temperature of the component is defining if it stays in the ash or it will travel with the flue gas to the filters and the ash ...
-
Manufactured by Zhengzhou Dongding Drying Machinerybased in CHINA
The coal ash drying machine is mainly used for drying industrial dust and waste residues such as fly ash, slime, lignite, raw coal, desulfurization gypsum, phosphogypsum, titanium gypsum, sludge, compound fertilizer and other materials with large water content and certain viscosity. ...
-
by REMEX GmbHbased in GERMANY
Non-ferrous metals stemming from incinerator bottom ash processing have to be cleansed from adhesive ash and sorted in order to be fit for further use. To achieve this, non-ferrous metal concentrates from various international plants are treated in a dry process in our non-ferrous upgrading facility in the Netherlands. In a specifically designed hall, the metal concentrate is passed over ...
-
Manufactured by ITEA S.p.A.based in ITALY
A great part of fuels contain non-combustible ashes, and for low ranking fuels and wastes this non-combustible fraction can become quite relevant; the traditional combustion of these fuels (in reality not all can be used in traditional processes) produces, in any case, slag that in small part accumulates at the bottom of the boiler (bottom ash) while almost all is carried away by the fumes (fly ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you