Boiler Regulations Articles

  • Gas engines for resiliency of site operation

    The choice to deploy a combined heat and power (CHP) system, utilising reciprocating gas engines, is often an investment decision to help drive cost and carbon savings to an organisation, whose focus is not traditionally, power generation. ...


    By Clarke Energy

  • Maximizing Boiler Performance - Case Study

    Combustion and the Significance of Unburned Fuel Combustion takes place when fuel reacts with oxygen to produce energy in the form of heat. The energy generated when fuel is burned is used in the operation of a variety of equipment, including boilers, furnaces, kilns, and engines. In addition to heat, CO2 (carbon dioxide) and H20 (water) are created as byproducts of the chemical ...

  • MPS Roll wheel oil - Case study

    Purpose This plant service bulletin (PSB) advises owners and operators of B&W MPS pulverizers on the latest recommendations for roll wheel oil lubricants. This bulletin applies to all MPS mill sizes. Background The roll wheel lubricant is selected based on the temperature of the coal/air mixture leaving the mill — mill outlet temperature (MOT). Most ...


    By Dürr MEGTEC, LLC

  • Case study - Mission Linen Supply, Santa Barbara, California, USA

    “A number of years ago Sid Abma of Sidel Systems USA Inc. approached us with his Sidel SRU flue gas heat recovery unit. I think that we, like most companies, considered it; but we took no action for some time. Finally a situation developed that made it beneficial for us to try this unit. We purchased a unit and had it installed in July of 2006. A second unit is in the process of being ...


    By Sidel Systems USA Inc.

  • Economics of tiny thermal power plants

    Thermal power plants is the main source of energy and electricity in India and almost all countries of the world. Most of the giant thermal power plants have capacity of 500MW to 1000 MW. Investment in such giant thermal power plants is Rs 100 million per MW including transmission lines and distribution lines. ( 60 rupees = 1 US$, MW=1000KW). So 1000MW thermal power plant costs Rs 100 million/MW ...


    By AADHUNIK GLOBAL ENERGY

  • What is a Condensing Boiler and How Does it Work?

    It can be all too easy to get confused about the different types of boilers and which is right for you. Today, it’s all about the condensing boiler, and building regulations specify that any new boiler installed in the UK should be a condensing type. But what are these boilers all about, and how are they different to regular boilers? What is a condensing boiler? ...


    By Green Business Watch

  • Mawera inside story – biomass case study

    With more than 30 years’ experience in the UK market, Mawera UK has supplied and installed wood burning boilers to numerous companies, turning wood-waste into heat for factory, office and process heating and helping companies recover the cost of their boilers through compliance with the RHI. To support progress and innovation, Mawera maintains its own levels of technology and combustion ...


    By Mawera (UK) Ltd

  • Boiler mact compliance at Boise Wallula case study

    Lundberg Helped Boise Wallula Reduce Emissions with a Geoenergy E-Tube WET ESP A major pulp and paper supplier in the northwest was in need of a cost effective solution to reduce their particulate emissions from a biomass fired boiler. Lundberg provided a Geoenergy Wet ESP to meet their needs. The result was a ten fold decrease in particulate emissions and they now meet current Boiler MACT ...


    By Lundberg, LLC

  • Attention to the use of steam boilers in the industry

    In the industry, if people need to use high-temperature steam , then the steam boiler will be used; water can be heated to a quite high temperature, and generates high-temperature steam . Steam boilers and other hot water boiler are not the same , if people want to use the steam boiler, the boiler must be certified , or else once operated wrongly , then the consequences are very terrible.  ...

  • Case Study - Helmsley Open Air Pool

    Helmsley Open Air Pool is operated by a registered charity – the Feversham Memorial Trust – and opens from June to September each summer. The 1930s pool is 25m in length and 10m wide. The existing heating system comprised an oil boiler working in tandem with an electric heat exchanger. During the 2007 season the oil boiler broke down and was in need of replacement. To keep the pool ...


    By LandEnergy Limited

  • How to Get the Most Out of Your Boiler MACT Energy Assessment

    Congratulations!  You’ve made it through the first year of planning for compliance with the Major and Area Source Boiler MACT rules.  That means there are two years left for major sources to come into compliance by January 31, 2016 (or January 31, 2017 for those who requested and received a one-year extension), and just ...


    By All4 Inc.

  • Major Source Boiler MACT Compliance with Oxygen Trim Systems

    The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Major Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters promulgated at 40 CFR Part 63, Subpart DDDDD, commonly referred to as the Major Source Boiler MACT (MSBM) standards, provide multiple continuous compliance options that require monitoring.  Among these options is the use of a ...


    By All4 Inc.

  • Energy efficiency and emission reduction of TPM, PM2.5, and SO2 from natural gas and fuel oil fired boiler exhausts

    Fully 8% of all of Canada’s energy consumption occurs in gas and fuel oil fired boilers in commercial and institutional facilities1, with proportional amounts of greenhouse gases, particulate matter, and other pollutants. Recently particulate matter, and in particular that smaller than 2.5 microns (PM2.5) has garnered specific attention due to attributed health effects as demonstrated by ...

  • Maxsys Fuel System helps packaging manufacturer pulp gas bills

    The installation of the increasingly popular Fuel System from Maxsys at the Launceston site of DS Smith Speciality Packaging has led to a 5.8% annual reduction in gas consumption – resulting in an impressive financial saving of thousands of pounds per year. Established for 40 years, the Launceston facility of DS Smith Speciality Packaging, part of the £1.7 billion DS Smith ...


    By Maxsys Fuel Systems Ltd

  • Union Papertech Ltd. save 6.8% gas using the Maxsys Fuel Systems

    A large Northwest paper mill has installed Maxsys Fuel System technology saving 6.8% off their energy bill and this has inspired them to place new orders with Maxsys for other applications. Union Papertech located at Simpson Clough, Lancashire, is part of the Purico Group, a 4,500-employee organisation with a global presence. Through its policy of continuous investment in the latest technology, ...


    By Maxsys Fuel Systems Ltd

  • Exergy analysis of a steam power plant: a case study in Iran

    In the last decades, exergy analysis, based on the second law of thermodynamics was a method that substituted the energy analysis in studying thermodynamic systems. In this paper, the cycle of a power plant and its details, with two kinds of fuels, natural gas and diesel, have been analysed at its maximum load and the two factors, losses and exergy efficiency, which are the basic factors used to ...


    By Inderscience Publishers

  • Ford Motor Co. Ltd reduce emissions by 5.1% on gas fired boiler plant using Maxsys Fuel Systems.

    As part of an ongoing objective to reduce emissions and conserve energy at the Ford Motor Company’s Dunton Technical Centre, Maxsys Fuel Systems have been fitted to the boiler plant, helping the company to achieve over 5% reduction in gas usage with a commensurate reduction in emissions. The Energy Committee at Dunton decided to investigate ways of reducing gas usage by improving ...


    By Maxsys Fuel Systems Ltd

  • Problems of catalytic boiler safety and their role in designing and operation of gas-fired boiler

    In the following paper, some problems of safety for catalytic boilers with fixed and fluidised beds are discussed. The reason is to protect the boiler from gas and fuel-air mixture explosion. For it the conditions excluding the transition from catalytic combustion to flame must be observed, and they are presented in the article for different combustible gases. A special attention has been paid to ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you