Boiler Regulations Equipment For Energy Management Available In Australasia
-
Manufactured by Saskatoon Boiler Mfg. Co. Ltdbased in CANADA
Saskatoon Boiler coal fired boilers are designed for steam or hot water service in sizes from 200,000 to 30,000,000 BTU/HR output. All boilers are in compliance with the applicable requirements of the Standard for Solid Fuel Central Heating Appliances, CAN/CSA-B366.1 and are listed and labelled by Underwriters’ Laboratory of Canada. Each unit consists of a boiler, stoker, safety controls ...
-
Manufactured by Forbes Marshallbased in INDIA
BEESAS is a system which offers intelligent safety, smart controls, peak efficiency and lowest downtime at all operating conditions of the boiler. It is fully automatic with no manual intervention, and hence, no compromise on safety, performance and efficiency of the boiler which results in guaranteed savings. ...
-
Manufactured by Steel Tubes Indiabased in INDIA
A tube from which hot gases of water vapor pass through a sealed container of water is known as Boiler Tubes. Thermal conduction transfers the heat from the vapor that heats the water and creates steam. Boiler Tube manufacturers in India recommend the use of boiler tubes for a steam locomotive. These tubes can be divided into 2 variants. A water boiler tube and a fire boiler tube. SA214 Tubing is ...
-
Manufactured by STELA Laxhuber GmbHbased in GERMANY
The belt dryer type BTF – S is an efficient stage dryer, which was specially designed for use in the food and pet food sectors. Stage dryers are characterised by the arrangement of several belts (stages) one behind the ...
-
Manufactured by Mazzoni S.r.l.based in ITALY
Maximum heating and minimum levels of polluting emissions of nitrogen oxide in the environment. Mazzoni boilers are synonymous with safety and quality guaranteed by quality materials and sizing designed for maximum heat output , with an eye to energy conservation and new environmental regulations and ...
-
Manufactured by Bidragon Machinery Co., Ltd.based in CHINA
Reliable and safety: The boiler heating area adopts argon gas welding, and before boiler departure factory is has been done X-ray inspection, water pressure test, ...
-
Manufactured by JSC Stropuva ir kobased in LITHUANIA
When the firewood is loaded, a single load burns up to about 30 hours. A single load of sawdust briquettes burns up to 4 hours. A single load of pellets burns up to 96 hours. Solid fuel: firewood, timber waste, sawdust briquettes, pellets and wood chips. Combustion duration of solid fuel load depends on its quality of fuel, outdoor and indoor temperature, thermal resistance, and other factors. ...
-
Manufactured by STELA Laxhuber GmbHbased in GERMANY
The belt dryer type BTF-L is a layer dryer for food and pet food applications. Layer dryers combine several belts on top of each other in one dryer ...
-
Manufactured by Zhongding Boiler Co. Ltdbased in CHINA
LDR/WDR electric steam boiler makes the electrical control cabinet separate from boiler body to avoid affecting the boiler’s working life when the electrical elements become aging. The electrical heated tube can be used for about 20000 hours; its thermal efficiency could almost be 99% and will not release NOX to the air, it is environmental. The control system is PLC, with LCD screen, auto ...
-
Manufactured by F.lli Tatano s.n.c.based in ITALY
Range: from 23 to 104 kW heat ...
-
Manufactured by Sole S.A.based in GREECE
A revolutionary application of international standards exclusively developed by SOLE Company in Greece!Special solar panels, blue titanium oxide selective surface with high performance are produced by SOLE for this application, having as a result the production of hot water at high ...
-
Manufactured by Superior Boiler Works, Inc.based in USA
The Apache 2-pass dryback boiler is designed for maximum efficiency, reliability and durability in today’s most demanding environments. Available with NOx reduction technology to sub 9 ppm. With pressures of 15 to 300 psi steam and 30 to 160 psi hot water, the Apache is the intelligent option for your particular needs. Available in sizes ranging from 40 to 2,500 ...
-
Manufactured by Superior Boiler Works, Inc.based in USA
The Arrowhead 3-pass firebox design with wetback boiler is designed for maximum efficiency, reliability and durability in today’s most demanding environments. Available with NOx reduction technology to 9 ppm. With pressures of 15 psi steam and 30 psi hot water, the Arrowhead is the intelligent option for your particular needs. Available in sizes ranging from 10 to 100 ...
-
Manufactured by Stork, a Fluor Companybased in NETHERLANDS
We have been supplying hydrogen combusting burners to the refinery and petrochemical industry for decades. We understand the effects of hydrogen and are ready to support you with: Direct firing (boilers & heaters) - High pressure hydrogen, Low pressure hydrogen, Blended / diluted hydrogen fuels, Enriched or full oxygen combustion. Supplementary firing (GT exhaust gasses) - Hydrogen and/or ...
-
Manufactured by Aningas-Ergos S.A.based in SPAIN
Steam boilers, hot water boilers and superheated water boilers: Steam Shell boilers from 250 to 50.000 kg/h. Design pressure PS up to 25 bar. Saturated steam or superheated steam. Hot water boiler from 60.000 to 20.000.000 kcal/h and superheated water to 190ºC. Sprint steam generators (water-tube) from 300 to 2.000 ...
-
Manufactured by Cochran Ltdbased in UNITED KINGDOM
Cochran has joined forces with leading biomass energy business Scot Heat & Power to offer a fully integrated steam and hot-water biomass energy solution. This fully integrated turnkey service encompasses the full spectrum of design and specification, through to complete boiler supply, construction and installation. The service can include the long term supply of chipped or pelletised wood ...
-
Manufactured by Metallica Metals Indiabased in MACEDONIA
The ASTM A192 / ASME SA192 specification pertains to seamless carbon steel boiler tubes designed for high-pressure service. These tubes are extensively used in various industries, including power generation, petrochemicals, refineries, and other applications with elevated temperatures and pressures. The ASTM A192 / ASME SA192 standard specifies these seamless tubes' minimum wall thickness, ...
-
Manufactured by Fröling Heizkessel- und Behälterbau Ges.m.b.Hbased in AUSTRIA
The S1 Turbo (15 – 20 kW) combines all the features of a state-of-the-art biomass combustion system. The speed-regulated induced draught fan ensures constant high quality combustion, and the carbonisation gas extraction system prevents flue gas from escaping, even when topping up. The new S1 Turbo stands out for its high efficiency and long refilling intervals, as well as its low emissions ...
-
based in GERMANY
Opportunities must be taken! Rotary kiln technology enables environmentally friendly energy production by the combustion of various by-products and waste materials. With rotary kiln technology, Werkstätten heating-systems GmbH provides future-proof answers to pressing questions facing agriculture, industry and local authorities today. We develop holistic thermal concepts with the rotary kiln ...
-
Manufactured by Ross Boilersbased in INDIA
The RM series combines the benefits of a watertube furnace along with a multipass firetube steaming chamber. This results into higher heat transfer area , hence increasing efficiency as compared to conventional solid fuel fired steam boilers. High efficiency is achieved by properly utilizing the fuels radiant heat in the water cooled furnace and the shell type steaming ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you