Only show results in Virginia? Ok

Boilers equipment for Energy Management

  • Premium

    ACME - Model C-520 Series - Electric Hot Water Boilers

    Acme electric boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers and Super Heaters Product line

  • Premium

    ACME - Model GS Series - Gas Fired Steam Superheaters

    ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers and Super Heaters Product line

  • Premium

    ACME - Model ES Series - Large Electric Steam Superheaters

    Acme Electric Steam Superheaters are available for use with steam boilers as an auxiliary piece of equipment. Our superheaters are all custom made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers and Super Heaters Product line

  • Premium

    ACME - Model ABS-CEJS-24SC-01 - Auxiliary Boiler Systems

    For the past 45 years ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels and associated control systems. The Acme ABS Packages are up to date solutions to current problems.

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers and Super Heaters Product line

  • Premium

    ACME - Model C-620 Series - Electric Steam Boiler

    A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers and Super Heaters Product line

  • Premium

    ACME - Model CEJS Series - High Voltage Electrode Steam Boiler

    The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor space.The ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers and Super Heaters Product line

  • Premium

    ACME - Model ES Series - Small Standard Electric Steam Superheaters

    ACME Electric Steam Superheaters are available for use with steam boilers as an auxiliary piece of equipment. Our superheaters are all custom made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers and Super Heaters Product line

  • Premium

    Accessories Workshop

    Our pipes & boiler works accessories: Our goal is not to deliver you a simple product such as a tank or a pipe, but to offer you the complete facilities and ensure the proper functioning of your industry. For this we have developed a complete workshop dedicated to the fabrication of pipes and boiler accessories.

    By GCER based in Ksibet, TUNISIA. from Workshops Product line

  • Premium

    Remote Combined Heat and Power Generation

    In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs.  Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Power Product line

  • Premium

    Steam Energy Recovery Systems

    Heat is recovered indirectly from the incinerator exhausting gas by passing them either through a gas tube heat exchanger or across a radiant tube boiler. Energy is exchanged between the gases and water to produce steam for heating or industrial processing. When used for electrical power production, the steam is further heated within a ...

    By Matthews Environmental Solutions Ltd. based in Hyde, UNITED KINGDOM. from Energy Recovery Systems Product line

  • Premium

    ERG - Energy Recovery from Waste Systems

    Recovering energy from waste is a great way to address the problem of how to dispose of waste which cannot be recycled of composted, whilst at the same time reducing operating costs. Despite recent oil price trends, energy continues to be a significant input for industry. It is almost a certainty that the cost of waste disposal will continue to ...

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM. from Thermal Systems Product line

  • Premium

    Rotork - Model JR Series - Damper Drive

    The JR Series was designed specifically for wall-fired boilers with burners using a combination of fuel and combustion air. The JR Series controls the secondary air that is introduced at the burner and the air/fuel ratio is regulated by a sliding-sleeve damper to balance the air flow distribution. The JR Series offers ‘split ...

    By Rotork plc based in Bath, UNITED KINGDOM. from Fluid Power Actuators Product line

  • Premium

    THIOPAQ - Deep H2S Removal From Biogas

    “Meet stringent gas quality requirements with deep hydrogen sulphide removal from biogas”. The THIOPAQ® was developed by Paques, in cooperation with universities, research institutes and customers. It can be applied to a wide range of biogas streams containing H2S and can be combined with all biological anaerobic systems. The ...

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Distillery Waste Biogas

    The spent byproducts of distilleries have historically been treated as waste. However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas engines.

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Biological Gases Product line

  • Model HTHW - Steam Boilers

    525 - 7000 kW, Designdesign until 18 bar-g. 3-pass boiler with open bottom. Fuels: All types of bio-fuels. Internal or external expansionsystem

    By Danstoker A/S based in Herning, DENMARK. from Biofuel Boilers- Bio Firetube Boilers Product line

  • Model MVF - Industrial Watertube Boilers

    Bidrum Type – Vertical Gas Path – Natural Circulation – Bottom Supported. Steam capacity up to 500 t/h – 1,100,000 lb/h.Steam op. pressure upto 110 barg – 1,600 psig. Steam op. temperature upto 520 °C – 970 °F. Fuel gas, oil and crude oil fired.

    By Macchi - - Sofinter Group based in Gallarate, ITALY.

  • Liquid and Gaseous Fuel Hot Oil Boilers

    They are designed horizontally. They have smaller sizes when compared with solid fueled  boilers. First investment costs are quite lower when matched with  solid fuel boilers. Low flow gas temperatureof  ISIMEK branded hot oil boilers are quite more effective then rivals. They  are coupled with many safety equipment, this is ...

    By ISIMEK BIOMASS BOILER LTD.STI based in KAZAN, TURKEY. from Liquid and Gas Fueled Boiler Systems Product line

  • Brox - Model SYK series - SCOTCH Steam Boiler

    BROX Steam Boiler which are scotch type conform with TS 377-2 (High Pressure Steam Boilers) standards.BROX Steam Boilers have the most improved designs which consist of conventional, 3-pass and fire tube. Keeping the water pumped into the boiler at minimum level reduces the initial start time. Considering this specification of BROX Boilers in the ...

    By Elektro Dinamik Brox based in TURKEY.

  • Model n-MAX - Parasitic Load Optimizer

    The n-MAX parasitic load optimizer maximizes efficiency by analyzing systems for parasitic losses in the boiler deaerator and pumps and strategically adjusts heat recovery in the deaerator and pumps to increase overall boiler efficiency. This advanced control system is an innovative solution that minimizes or eliminates all parasitic losses, with ...

    By Benz Air Engineering Co. Inc based in Las Vegas, NEVADA (USA).

  • Thies - Model 393 - High-Efficiency Safety Valves

    These safety valves are for blowing-off saturated steam from pressure generators. THIES-Diaphragm High-efficiency Safety Valves meet the following German requirements: the AD Specification A 2 for „Safety Valves“, the Technical rules for steam boilers (TRD 721), the Safety Valves Code according to EN 12828. Response overpressure: ...

    By Thies Armatur GmbH & Co KG based in Sarstedt, GERMANY. from Safety Valves Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you