Burner Management Equipment For Energy Management
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
-
Manufactured by Clean Combustion Technologies ABbased in SWEDEN
Clean Combustion Start-up Burner systems have been designed for energy intense industrial applications. High Turn Down fuel injectors are integrated in Start-up Burner stations. Turn Down Ratio of 10:1 is achivable when using the complete BMS and control. Thats give the possibility to run on only 10% of Maximum capacity needed. Ideal for Recovery Boilers and Power Boilers that need a easy and ...
-
Manufactured by Thruster Technologiesbased in USA
Have a difficult project? Let our experienced engineering staff custom design your next combustor project. Whether its a simple combustor with Inlet Air Arrestors, or a full custom electronics system, we are here to help make sure your application is a ...
-
Manufactured by Fireye Inc.based in USA
Fireye Phoenix 85UVF self-checking scanners are used to detect ultraviolet emissions from fossil fuel flames such as natural gas, coke oven gas, propane, methane, butane, kerosene, light petroleum distillates and diesel fuels. ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
An incinerator or thermal oxidizer provides the ultimate in destruction efficiency. An incinerator is a fired appliance used to oxidize potentially dangerous hydrocarbons (including BTEX’s) and sulfur compounds from oil and gas production processes. Designed with precise calculations, incinerators achieve in excess of 99.9% Destruction Removal Efficiency (DRE). An incinerator uses an active ...
-
Manufactured by FUMIS, By ATech elektronika d.o.o.based in SLOVENIA
FUMIS ALPHA is a superior solution for combustion control of stoves, burners and low power ...
-
Manufactured by BCE – Burners and Combustion Equipment – srlbased in ITALY
BCE can provide complete solutions for the safe and efficient start – up, operation and shut – down of complete combustion systems for Water tube boilers, Heat Recovery Steam Generator (HRSG), Waste to energy incinerators, Waste liquid and gaseous streams incinerators and many other industrial applications. The typical Burner Management and Control System is consisting of two ...
-
Manufactured by CHEEMA BOILERS LIMITEDbased in INDIA
CBL GASPAC Boiler is a three-pass, wet back, fully packaged boiler designed to deliver high combustion and thermal efficiencies. It is designed to fire liquid and gaseous fuels. The true three-pass design ensures efficient heat transfer and low flue gas exit temperatures for high thermal efficiencies. ...
-
Manufactured by Forney Corporationbased in USA
adVantage Duct Burners perform in the most challenging conditions. Premium components and patented technology join to perform like no other duct ...
-
Manufactured by Gasco Pty Ltd.based in AUSTRALIA
Gasco supplies Fired Heaters to API 560 and ISO 13705 and proprietary Gasco forced draft convective ...
-
Manufactured by BKtechbased in SWEDEN
BioMax is one of a kind among mobile bioenergy plants in the range of 7–15 MW. As such, BioMax is just as suitable for industrial applications as it is for municipalities looking to phase out their fossil-fueled heating plants. BioMax is arranged in modules and equipped with multi-fuel burners that can either run on wood powder or alternative ...
-
Manufactured by Janfirebased in SWEDEN
PX 22 is a small smooth and easy-to-manage pellet burner in stainless steel. Long service life. No moving parts. The burner has a high degree of safety with built-in protection such as overheat protection and monitoring sensor for the flame. The burner starts and stops automatically and adjusts the power according to the boiler temperature. Manufactured by Janfire AB in Åmål / ...
-
Manufactured by BKtechbased in SWEDEN
BioOne is our family of mobile bioenergy plants that use wood pellets as an energy source in outputs ranging from 870 kW to 2 MW. BioOne is available in a number of configurations that are optimised for the production of steam, warm water, hot water or hot ...
-
Manufactured by Doosan HF Controls Corporationbased in USA
The new HFC All-In-One Compact Flame Scanner was meticulously designed for continuous, intermittent, and 72-hour operation. The flame scanner's durable housing integrates both the scanner and amplifier into one subcompact assembly, which reduces overall cost and simplifies installation tremendously. Additional costs normally required for mounting the control electronics in a separate, service ...
-
Manufactured by Rogue Combustionbased in USA
At multiple installations, our ClearSign Core™ Enclosed Flare has consistently delivered sub 15 ppm NOx and greater than 99.9% destruction efficiency, all without any visible flames. It is available in Forced and Natural Draft configurations and can service the wellhead, pipeline, upstream and midstream industries. ClearSign's offering represents a cost effective, reliable, and complete ...
-
Manufactured by Clean Combustion Technologies ABbased in SWEDEN
With Clean Combustion Burner Safety System (BSS), each fuel will have its own safety logic for firing. A signal splitter will give the Safety PLC independence from the DCS for signal input. This results in the safest operative logic for the safety system. We offer the PLC system as Siemens, or ABB/Allen Bradley/Honeywell, or following client ...
-
Manufactured by CMI Groupebased in BELGIUM
Innovative concepts for reheating furnaces to improve energy efficiency and product quality. For carbon, stainless and silicon steel, CMI has developed its Optimfl@me® reheating furnace: a patented furnace design that considerably improves heating quality, decreases energy consumption, reduces pollutant emissions and increases production flexibility. The CMI reheating furnace is designed to ...
-
Manufactured by Fireye Inc.based in USA
The Nexus® NXF4000 model offers integrated burner management with an electronic parallel positioning and O2 trim combustion control system. The Fireye NXF4000 is an advanced burner management controller with internal flame safeguard, designed to operate burners firing liquid or gaseous fuels. NXF4000 supports up to 4 servos per profile plus 2 VFD c channels, touchscreen interface, 15 ...
-
Manufactured by LAMTEC America Inc.based in USA
LAMTEC America’s all-in-one design in gas igniter solutions are the industry-leading solution to cost-effective replacement of legacy equipment in terms of installed cost and operational improvements. Igniters that consistently light off main burners, provide reliable transition support, and have proven, tested to compliance, service life, are absolutely must-haves for fossil power (boilers ...
-
Manufactured by Clean Combustion Technologies ABbased in SWEDEN
Clean Combustion Load Burner systems have been designed for energy intense industrial applications. Through active innovation and modular design we ensure each system provides improved efficiency and reliability. High Turn Down fuel injectors are integrated in Load Burner stations. Turn Down Ratio of 20:1 is achivable when using the complete BMS and control. Thats give the possibility to run on ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you