Burner Systems Applications available in Virginia
-
Primary air control for coal-fired power plants
Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high vibration, temperatures up to 750° F and dirty 'Fly Ash' laden ...
By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Combustion Technology for Sulphur & Sulphur Acid
For the majority of the licensors of sulphuric acid processes represented on the market, CS builds burners and combustion chamber systems for the combustion of liquid sulphur, with or without a downstream waste heat ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Hydronix Sensors for Coal
The moisture content of coal may be measured. Pulverised Coal Injection is a common method of burning low grade or low carbon coal to create electricity. Small particle size low grade coal is measured as it is injected into the burners. The rate of injection is a direct function of the moisture content of the coal. As the material becomes drier the throughput is reduced to avoid serious overheating which can result in very significant financial loss and plant ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Precision moisture analysis instruments for measuring moisture and ash in biomass
If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can ...
By AMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA).
-
Combustion Technology for Hot Gas Production
Hot process gas is required for the start-up or running of many production plants, in the refinery as well as in petrochemical plants and in the minerals industry. CS can offer hot gas generator systems for almost all applications. Many years of experience in the firing sector, as well as tailor-made solutions, which are tested for the most complex applications by using CFD, make it possible to supply optimum complete systems for the customer. No matter whether the process gas has to be provided at 100°C, ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Hydronix Sensors for Wood Pellets
To monitor and control the feed rate of wood pellets into industrial ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Very large waste gas volumes with low contaminant concentration
Example: Electronics industry. Similar tasks: Paint shops, spectacle coating, coating on the inside of ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Combustion Technology for Alternative Combustibles
Hydrogen is the fuel gas with the highest burning rate and flame temperature and was already a fuel used for energy by industry before the power to fuel trend. Often as a by-product from chlorine gas production or conventional H2 steam reformers, where it is "contaminated" with other hydrocarbons, it is used to heat convection reformers. CS has been supplying burner systems for various concentrations of H2 for all types of hydrogen production plants for over 10 years. Hydrogen has also always been an important ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Hydronix Sensors for Pulverised Fuel Ash (Blast Furnace Slag)
The sensors measure moisture in pulverised fuel ash (PFA) and PFA slurry. When using PFA as a cementitious material the sensors are used to control the correct dry weight of material used in the process. They may also be used to measure in PFA slurry to improve control when manufacturing products such as autoclaved lightweight block. This ensures correct and and consistent water cement and PFA ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
LowNOx Systems for Nitrogenous Fuels
During the combustion of organic fuels with a high nitrogen content, NOx concentrations of up to several thousand mg or ppm are produced during a normal combustion process. The most efficient primary measure for NOx reduction is the staged combustion, where the combustion air is applied in two or more stages, depending on the ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Alternative Fuel Production
Superior Boiler Works, Inc. led the way in Ethanol production in the USA with more installed firetube boilers in Ethanol plants than any other manufacturer. Ethanol requires the distillation of sugars into an alcohol fuel. Superior’s products are used to generate heat needed for the ethanol distillation processes, heating storage tanks as well as batch reactors. Additionally, Superior Boilers can be fitted with packaged burners which fire a variety of fuels from tallow to syngas to Hydrogen and most anything ...
By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).
-
Several waste gas streams: Short, high concentration peaks and a constant medium concentration
Example: Production of synthetic resin. Similar tasks: Chemical industry, batch processes in the pharmaceutical and plastics ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Several waste gas streams: Highly contaminated oxygen-free waste gas, and medium waste gas stream
Example: Chemical industry. Similar tasks: Petrochemical and pharmaceutical ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Combustion Technology for Liquid Residue Incineration
The entire chemical, petrochemical and pharmaceutical industry produces huge amounts of liquid residues that can be thermally recycled. In response to the principle of zero waste emission, these are increasingly being converted into thermal energy directly where they are produced. This is usually done in adiabatic combustion chamber systems with subsequent waste heat utilisation. Industrial parks also have special hazardous waste incineration plants, operated by globally active waste management companies, in which ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Biomass Pellet Based Cooking Solutions for Frying
Abellon Ecoequipments offer a range of biomass pellet based cooking solutions including pellet Cookstoves and pellet burners. Our equipment is an ideal replacement to LPG, Diesel and FO based systems in restaurants, canteens, catering businesses, sweet and namkeen making units, bakeries and biscuit manufacturing lines, and other food and food processing segments. Choose the Cookstove or Burner that best suits your need, or call us ...
By Abellon Eco Equipments Ltd. based in Ahmedabad, INDIA.
-
Air emissions solutions for boilers and burners sector
Measurement Technique for Combustion Applications. Gas burners, Fuel burners, Low NOx burners, FLOX burners, Large-sized combustion plants, Large-sized boilers, Industrial ovens, Biomass firing plants, Wood-firing combustion ...
By Online Safety Services (Europe) Ltd based in Staffordshire, UNITED KINGDOM.
-
Biomass Pellet Based Cooking Solutions for Multipurpose Cooking
Abellon Ecoequipments offer a range of biomass pellet based cooking solutions including pellet Cookstoves and pellet burners. Our equipment is an ideal replacement to LPG, Diesel and FO based systems in restaurants, canteens, catering businesses, sweet and namkeen making units, bakeries and biscuit manufacturing lines, and other food and food processing segments. Choose the Cookstove or Burner that best suits your ...
By Abellon Eco Equipments Ltd. based in Ahmedabad, INDIA.
-
Burn Off Ovens for Paint & Powder Coating Removal
At Pollution Control Products, we offer burn off ovens that are effective in the removal (sometimes called stripping) of paint and powder coatings from metal parts including hooks, racks and more. Below is a common application scenario for our ...
By Pollution Control Products Co. based in Dallas, TEXAS (USA).
-
Catalytic Heaters for Curing and Drying Industry
Applying the infrared principle with catalytic gas fired emitters is simply the most efficient method for drying and curing coated parts. Unlike convective systems, which heat the air, catalytic heaters emit IR energy directly to the substrate which is absorbed rapidly by the coating. There is an immediate temperature rise which initiates the gel stage within the 1st few minutes of exposure. Full cure times are dramatically reduced, generally by 50 to 80%. Your actual benefit can be determined beforehand by ...
By American Catalytic Technologies based in Clinton, CONNECTICUT (USA).
-
Furnace Bottom Ash Leakage and Slag Conveying System
When the garbage is incinerated in a grate furnace, ash leakage will occur at the bottom of the furnace. According to the characteristics of furnace bottom ash leakage and the requirements of the process for its treatment, our company has developed a ...
By Jiangsu Bootec Environment Engineering Co., Ltd. based in Wuxi City, CHINA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you