Burner Systems Articles

  • Akzo Nobel Contract Report Case Study

    Akzo Nobel, a global paints and coatings manufacturer with operations in over 80 countries, were seeking sustainable methods of reducing their Slough production plant’s annual emissions, as well as its fuel and running ...


    By Limpsfield

  • Modification of Competition - Designed Enclosed Combustor - Case Study #170402

    Project Details Location: Rosa, CA & Dexter, MI Max Heat Release: 2.4 MMBTU/HR Application: Food Services (Brewery) ...


    By AEREON

  • LaCygne - GSG™ Graduated Straightening Grid Performance

    KCP&L’s LaCygne Generating Station provides 1,532 MW of peak power to customers from the site south of Kansas City. LaCygne Unit 1 is an 815 MW B&W cyclone boiler with Over-Fire Air (OFA) and SCR NOx controls, and the second oldest WFGD installation in the country. LaCygne Unit 2 is a 717 MW B&W PC boiler with Low NOx Burners (LNB), OFA, and ESP particulate control. ...


    By Fuel Tech, Inc.

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • Low-Nox Burner retrofit Experiences in Cracking Furnaces at Dow, Terneuzen

    Abstract: Dow Benelux B.V. (Dow) operates three ethylene plants from the Netherlands, all based within its Terneuzen facility. In 2009, Technip Stone & Webster Process Technology (Technip) studied options to reduce the NOx emissions from the cracking furnaces of cracker 1. The results of this study, combined with the experience elsewhere within the Dow Chemical Company, have been used to ...

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Afterburner with quench & scrubber

    Epcon has extensive experience in designing and building Afterburners for the Chemical & Petrochemical Industries. The Problem A leader in Latin America's Chemical and Petrochemical Industry needed equipment to oxidize Hydrogen Sulphide and removal of SO2/SO3. The company went out seeking the technical solutions and went to several manufacturers to locate the best ...


    By Epcon Industrial Systems, LP

  • Vortex structure and heat transfer in a diffusion combustion field with circulating flow

    A numerical study was performed to examine the vortical structures for combusting flow from a two-dimensional bluff-body slot burner in the transitional recirculating flow. The numerical results support the flow visualisation results for C3H8 combustion by Chin and Tankin [Chin, L.P. and Tankin, R.S. (1991) 'Vortical structures in a 2-d vertical bluff-body burner', Combustion Science and ...


    By Inderscience Publishers

  • Thermal design and emissions of duct-burners for combined-cycle and cogenerative plants

    This paper mainly aims at demonstrating that an appropriate thermo-fluid-dynamic design optimisation of duct-burners for combined-cycle and cogenerative plants allows to satisfy restrictive emission limits, while significantly reducing the thermal stresses and the undesired pressure drops. In particular, a detailed discussion on the influence of the TEG composition and of the thermal load, ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you