Burner Temperature Manufacturers, Suppliers & Companies (Burner Systems - Energy Management)
-
AMETEK Land (Land Instruments) is the world’s leading manufacturer of monitors and analysers for industrial infrared non-contact temperature measurement, combustion efficiency and environmental pollutant emissions. Through our trusted range of ...
-
Manufacturerbased in Stewartby, UNITED KINGDOM
Flare Products is a light engineering company specialising in the efficient application of combustion and flare systems. We work with our clients to minimise the impact of industry on the environment by supplying technology to remove excess or ...
High Temperature Ground Flare Burner Systems
The high temperature burner is used for achieving a higher level of flame control and temperature. The flame is much shorter on this type of burner sitting just above the air ...
CONTACT SUPPLIER -
Manufacturerbased in Surat, INDIA
Oxilon Burners is manufacturer and supplier of high quality burners for industrial and commercial applications. Oxilon Burners is 20 years old company in the field of burner manufacturing. Oxilon Burners dedicated to create global brand values for ...
Oxilon - High Temperature Burners
High Temperature Burners are designed to work for High Temperature application. Special Design. Optimal fuel/oil ratio. Single Stage, Double Stage and modulating burner. Easy access ...
CONTACT SUPPLIER -
Manufacturerbased in Wien, AUSTRIA
CS Combustion Solutions is a team of senior specialists dedicated to reliability and innvoating the field of combustion technology. With more than 10 years independent presence on the market and 30 years experienced engineers, CS is known as ...
CS - Model HT - High Temperature Burner
Designed specifically for operation with preheated combustion air, this burner series can have combustion air temperatures above 350°C up to 600°C. The air box of this burner is lined with ...
CONTACT SUPPLIER -
Manufacturerbased in Northriding, SOUTH AFRICA
Safurnco (Pty) Limited was founded in 1957 by J R Mitchell (ex Steam & Mining Equipment). He was joined by W H van der Mey in 1959, D A Kirk in 1962 and H Singleton in 1972. Saubatech and previously safurnco was founded primarily as a heat ...
-
Manufacturerbased in Bristol, CONNECTICUT (USA)
ETTER Engineering has historically served the Northeast providing gas equipment and systems to countless markets and applications since 1940. ETTER Engineering originated as a manufacturer’s sales representative firm and has evolved into a multi ...
ETTER Engineering ControlWorx - Model SBCP 1000 - Custom Control Panels
The ETTER Engineering ControlWorx SBCP 1000 is a single burner control panel that provides basic flame supervision to a single gas-fired, pilot ignited burner. The High Temperature Limit instrument ...
CONTACT SUPPLIER -
Manufacturerbased in Williamsport, PENNSYLVANIA (USA)
Pennram Diversified Manufacturing Corporation, with plants located in Williamsport and Montgomery, Pennsylvania in the U.S.A., is noted for its superb design and quality manufacture of solid waste incinerator systems. Pennram manufactures ...
-
Custom manufacturerbased in Baiersdorf, GERMANY
Issendorff TPT e.K. was founded in 2010 by Dr.-Ing. Franz von Issendorff. Issendorff TPT develops and delivers worldwide customized gas burners, combustion systems and thermal processing plants. The focus of activities lies on gas fired heating ...
Issendorff - Model MFB - Metal Fibre Burner
Metal fiber burners are typically used in applications where uniform heating of the product by infrared radiation is advantageous. Both the burner output and the emitted radiant heat can be controlled over a wide ...
CONTACT SUPPLIER -
Manufacturerbased in Lier, BELGIUM
Our Technologies and Processes transform an environmental problem into a revenue stream for our clients. Since its foundation, Nutara has consistently been at the forefront of technological innovation and today we offer Best Available Technologies ...
Europem - Steam Assisted Flares Systems
Since the 1980’s, key staff of Europem have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications.Europem’s ...
CONTACT SUPPLIER -
Manufacturerbased in Senago, ITALY
Santin Industrial Burners is engaged in the manufacturing and maintenance of natural gas and LPG burners and low-emission burners. Thanks to its team of specialized technicians and over forty years of experience in the business, it is able to offer ...
Sir - Bruciatori Rigenerativi
SIR are direct heating burners. SIR burners work in pairs and they exchange heat through heat exchanger that gets heat during alternate suction. This kind of burners allow to get a consumption ...
CONTACT SUPPLIER -
Manufacturerbased in Normandy, UNITED KINGDOM
Hydronix is the world's leading manufacturer of digital microwave moisture measurement sensors. Established since 1982 we have installed over 85,000 sensors across a wide range of industries in over 80 countries worldwide. Our moisture sensors are ...
-
Manufacturerbased in Mississauga, ONTARIO (CANADA)
For more than 26 years Dynablast has been a leading manufacturer of industrial pressure washers. With the early introduction of the environmentally friendly range of natural gas and propane heated burners, Dynablast machines have outlasted the ...
-
Manufacturerbased in Caronno Pertusella, ITALY
BCE – Burners and Combustion Equipment – srl is a limited liability company registered in Italy since 1987, with offices in via Santa Margherita 450, 21042 Caronno Pertusella (Varese) – Italy. BCE is manufacturing a wide range of industrial burners, ...
Sulphur Burners
for mechanical atomization of sulphur. For this reason is important that sulphur reaches the burner at high temperature and pressure and at liquid state. To guarantee the correct combustion conditions, the ...
CONTACT SUPPLIER -
Manufacturerbased in Pila, POLAND
The mission of our company is to promote renewable energy sources by the strategy of continuous biomass combustion technology development – continuous improvement of the already implemented solutions and work on next innovative products. We want to ...
Pellas X - Model Mini - Pellet Burner
Safety; Patented technology of high pressure combustion – no risk of backfire. Burner’s temperature control. Reliability; Patented system of fuel mixing in the furnace chamber significantly prolongs the ...
CONTACT SUPPLIER -
Manufacturerbased in Addison, TEXAS (USA)
Forney Corporation manufactures front-end combustion components serving the electric utilities, chemical processing, pulp/paper and cement industries. Since its inception in 1927, Forney has expanded its product line to include igniters, burners, ...
-
Manufacturerbased in Glenpool, OKLAHOMA (USA)
Founded in Tulsa, Oklahoma in 1992, MRW's flare, oxidizer, and burner designs are based on over 30 years combustion and pollution control equipment experience by each of our principals. MRW is a specialist in custom solutions and consultative ...
MRW - Enclosed Combustors System
With hundreds of units in operation across Texas, Oklahoma, Colorado, Utah, New Mexico, Louisiana, Ohio, Pennsylvania, West Virginia, and North Dakota MRW enclosed combustors, often called vapor combustors, are designed to destroy vapors from ...
CONTACT SUPPLIER -
Manufacturerbased in Třebíč, CZECH REPUBLIC
In 1994 PBS Třebíč became a joint-stock company and started a gradual process of this transformation. At the present time the company is a dynamically developing producer and supplier od quality products for heating plants and power-plant ...
PBS - Model AOH-M(E) - Monoblock Oil Burners
guarantee high economy of the operation. From design point of view, the burner is designed as complex unit, i.e. the fan is directly in the body of the burner. Burners of the series AOH-M PL are ...
CONTACT SUPPLIER -
Manufacturerbased in Kennesaw, GEORGIA (US) (USA)
Thermal Fluid Systems, Inc. is a complete system supplier of thermal fluid heaters and hot oil systems including heating, cooling, pumps, valves, tanks, heat exchangers, economizers, stacks and associated equipment. Since 1994 Thermal Fluid Systems ...
-
Manufacturerbased in Burlington, ONTARIO (CANADA)
Saniflame is an experienced incinerator manufacturer that offers medical waste incinerators, dead animal composting, and solutions for other bio-waste streams. Our management team has over 100 years' experience in furnace design, operation, ...
-
Manufacturerbased in Kartal, TURKEY
Ecostar is specialized in two main groups of products as monoblock and duoblock burners. Ecostar, in addition to its domestic-monoblock burners’ production from 40 kw up to 11.500 kw, also produces industrial-duoblock burners up to 67 MW for various ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you