Burner Technology (Burner Systems) Equipment
-
Manufactured by Olymp Werk GmbHbased in AUSTRIA
Perfect combustion is no coincident. A long experience in building burners is the solid base for a modern and reliable combustions system. Olymp has always been one of the most innovative companies and holds many patents. The Viscostat oil preheater for gasoil is used on many burners. Olymp burners are made under the most modern ...
-
Manufactured by ClearSign Combustion Corporationbased in USA
Finally, a disruptive technology for new heaters and retrofit applications. Ultra Low NOx <5ppm: Cutting edge technology capable of meeting sub 5 ppm NOx guarantees in fielded applications. No Flame Impingement: Due to the arrangement of the burner and its combustion surfaces, flame dimensions are significantly reduced, making the ...
-
Manufactured by ClearSign Combustion Corporationbased in USA
Complete systems and retrofits available. Ultra Low NOx less than 2.5ppm: Premixed combustion, entrainment of spent flue gases coupled with increased heat loss from a high emissivity ceramic tile enable NOx levels to unprecedented levels never seen in the industry – all without the use of reagents, catalysis and/or high excess air ...
-
Manufactured by Rogue Combustionbased in USA
Ultra Low NOx lessthan 5ppm. Cutting edge technology capable of meeting sub 5 ppm NOx guarantees in fielded ...
-
Manufactured by RJM Internationalbased in UNITED KINGDOM
RJM has been developing its own ultra-low NOx burner technology since the company was founded in 1977. With applications to suit every firing configuration and all coal types, including lignite and high moisture coals, RJM has a proven burner solution that can minimise or obviate the need for secondary NOx reduction ...
-
Manufactured by National Airoil Burner, Inc (NAO)based in USA
NAO flares pilots have continuously advanced over 70 years of field experience. The original design came from NAO inspirating gas burner technology -- tested in the oil fields, refineries & petrochemical plants of Texas before WWII (World War ...
-
Manufactured by IACbased in USA
IAC’s engineering and field service teams are familiar with industrial burners and furnace technology offered by most major OEM’s, and attend factory training classes to refresh their skills when available. If your next project requires technical specifications for optimal industrial burners and furnace systems to meet your ...
-
Manufactured by Detroit Stoker Companybased in USA
Efficiency and Versatility for Boiler Burner Applications: Enhance performance of existing solid fuel grate-fired combustion systems. Includes Startup & Auxiliary function. Gain fuel switching flexibility. Increase efficiency. Improve load swing response. Lower operating costs. Recover boiler derate. Resolve emissions problems. ...
-
Manufactured by Detroit Stoker Companybased in USA
Detroit Vertical Fire Technology utilizes a single, upward-firing burner in the furnace floor to eliminate the risk of flame impingement on boiler water walls. This lets a single burner provide the input capacity of several front or side wall burners. Multiple gas trains and complex burner management systems are ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
with the required additional burner technology. For special requirements i.e., landfill gas application, the customer can implement our innovative and low emission NOXtor ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Latest Design for Efficient Cremation: Backed by over 30 years of combustion technology. Main burner positioned for direct flame contact to case. Rapid heat up and cool down cycles with low noise operation. Tile floor for ease and cost-effective replacement. Refractory lined for efficiency and ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
gas flares can be specially configured for the burning of biogas and biomethane. The fully customized burner technology and combustion chamber design guarantees an efficient and environmentally friendly combustion of the gas. The complete ennox reange of accessories i.e, compressor station, temperature monitoring and winter packet can of course ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The high temperature are is the further developed NOXmatic are for the safe and low-emission combustion of land ll, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas com- ponents are fully processed, thus greatly reducing the formation of nitrogen ...
-
Manufactured by Energy Technology Centre Ltdbased in UNITED KINGDOM
A small steam boiler is available at Energy Technology Centre's facilities for research and development of burner technologies and new ...
-
Manufactured by SolaGen Incorporatedbased in USA
EnerTek burner technology can be incorporated with process steam, hot water, or thermal fluid applications. High heat release and flux rates allow successful integration with small combustion chamber volumes as typically found in package boiler hardware. An extremely cost competitive option for biomass firing in larger institutional or ...
-
Manufactured by FCT Combustionbased in USA
FCT’s flagship natural gas kiln burner, endorsed by the USA EPA as best in-class natural gas burner ...
-
Manufactured by Stork, a Fluor Companybased in NETHERLANDS
We can supply you with (Ultra) Low NOx burners for gaseous, liquid and solid fuels, renewables and hydrogen, both for direct fired installations as well as supplementary firing. These burner technologies can be combined with other NOx reducing techniques, such as: Flue gas recirculation, Air staging, Fuel staging, Steam injection ...
-
Manufactured by AC Boilers S.p.A. - Sofinter Groupbased in ITALY
With over 150 years experience in Steam Generation and Burner Technology and a track record of 1000 units exceeding 80,000 MW installed worldwide, AC BOILERS SpA, formerly Ansaldo Caldaie, is in leading position in design, manufacturing and supply of Utility Boilers, coal, oil and gas ...
-
Manufactured by REMKO GmbH & Co. KGbased in GERMANY
The REMKO series is characterised by their compact dimensions, flexible application possibilities, and particularly by their microprocessor controlled gas burner technology. A total of four unit sizes with a heating capacity from 4.7 to 82.0 kW is available. The units are suitable for both wall and ceiling mounting. A variety of exhaust ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
The rapidly advancing fuel cell industry is persistently striving to become safer, less costly, and more efficient each day. PCI is supporting that mission with our unique burner technology. We are helping to pioneer fuel cell development by adapting our innovative burners to effectively complement emerging advances in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you