Incinerator Burner (Burner Systems) Equipment
-
Manufactured by SkimOil, LLCbased in USA
The RetroBurnR is a VERY efficient thermal oxidizer, fueled by diesel oil. RetroBurnR can be used for: high moisture waste, animal cremation, agricultural incineration, veterinarian ...
-
Manufactured by SkimOil, LLCbased in USA
EPA Approved Method — WiseHeatR meets EPA regulation 40 CFR #279.1(c) allowing the burning of on-site mixtures of oil and other materials (such as used oil filters, rags and sorbent materials) when used for energy recovery. WiseHeatR is more than a furnace. It is an environmentally intelligent way to burn used absorbent materials, and other oily wastes on-site and to generate "free heat" at ...
-
Manufactured by Global Spill Controlbased in AUSTRALIA
Application: The electric Turbo Burn Incinerator is a Western Australian designed and built unit that can incinerate oil, absorbents, greasy rags, oil & fuel filters, office waste, food services waste, bags, packing material and non-infectious waste without polluting the air. Small and portable ...
-
Manufactured by Puti Energybased in INDIA
We specialize in low calorific value gas burners, burners are available for blast furnace gas, producer gas, mixed gas; synthetic gas both direct fired and regenerative burner. Biogas fired boiler burner can be supplied ex-stock. We also produce special burners for client including incinerator ...
-
Manufactured by Eclipse, Inc.based in USA
Incini-Cone burners are designed for fume incineration and the after-heating of exhaust from turbines, dryers, ovens and similar equipment. The burner is mounted in the exhaust duct and requires the exhaust stream to supply all of the oxygen needed for complete combustion. Burner assemblies include the burner ...
-
Manufactured by McPherson Systems Inc.based in USA
The McPherson Systems air curtain destructor, also known as trench burner, air curtain incinerator, curtain burner, is an alternative to open burning as a method of waste disposal. The trench burner is effective in reducing smoke and other pollutants especially where open burning is prohibited by law. ...
-
Manufactured by Clear Rush Co.based in CANADA
The BGR-18LP Eco Combustor is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, oil storage tanks, or de-hys. The combustor eliminates the need to install expensive vapour recovery units (VRU) or large incinerators. The high efficiency burner ...
-
Manufactured by Thermal Lining servicesbased in INDIA
Design of this waste incinerators is typical. Solid waste has built in carbon which supports self combustion if it is loaded in the chamber where temp of 750 c is maintained. Hence we maintain the loading chamber temp to 750 C through Automatic Gas Burner, at this temp waste release its in built Heat and raise temp of chamber to 850 C. Thus ...
-
Manufactured by International Combustion Equipment Srl (I.C.E.)based in ITALY
SRU / Claus processes are one of the most important/critical issues for installation and licensors. Starting for small, simple burners, now I.C.E. has the capability to design, realize and test burners for all involved unites. This is also confirmed by the increased number of I.C.E. supplies in this particular field. We also had the ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential areas. ...
-
Manufactured by Promillbased in FRANCE
The Promill TURBO indirect drying concept aims at combining the best heat recovery and destruction of VOC (smell). This is achieved by an integrated recovery of energy to recover more than 80 % of latent heat, resulting in, for example, net thermal requirement of minimum 130 kcal/kg evaporated water and wet bulb temperature of ...
-
Manufactured by Promillbased in FRANCE
The Promill TURBO indirect drying concept aims at combining the best heat recovery and destruction of VOC (smell). This is achieved by an integrated recovery of energy to recover more than 80 % of latent heat, resulting in, for example, net thermal requirement of minimum 130 kcal/kg evaporated water and wet bulb temperature of ...
-
Distributed by Flextim Industry SRLbased in ROMANIA
The IncinerPro i850 is part of the range of incinerators with the main fixed combustion chamber and is recommended for incineration of medium and high volume waste, especially waste with higher humidity load or lower calorific power (e.g. chicken, from slaughterhouse and meat processing plants ...
-
Distributed by Flextim Industry SRLbased in ROMANIA
IncinerPro i2000 is one of the largest models in the standard range of incinerators with the main fixed combustion chamber. It is a recommended equipment for the incineration of large volumes of waste even cattle or equine ...
-
Distributed by Flextim Industry SRLbased in ROMANIA
The IncinerPro i400 is part of the range of incinerators with the main fixed combustion chamber and is recommended for the incineration of small and medium volume waste (e.g. birds, pets, sheep, pigs, smaller quantity of slaughterhouse or from meat processing plants ...
-
Distributed by Flextim Industry SRLbased in ROMANIA
The IncinerPro i500 is part of the range of incinerators with the main fixed combustion chamber and is recommended for the incineration of medium volume waste (e.g. chicken, pets, sheep, pigs (including sows), slaughterhouse, meat processing plant etc.) ...
-
Distributed by Flextim Industry SRLbased in ROMANIA
Mobile incinerator (mounted on trailer) intended for the disposal of animal ...
-
Distributed by Flextim Industry SRLbased in ROMANIA
The IncinerPro i1750 is one of the largest model in the standard range of incinerators with the main fixed combustion chamber. It is a recommended equipment for the incineration of large volumes of waste even cattle or equine ...
-
Distributed by Flextim Industry SRLbased in ROMANIA
The IncinerPro i1000 model is part of the incinerator range with the main fixed combustion chamber and is recommended for the incineration of medium and high volume waste (e.g. sheep, pigs, slaughterhouse and meat processing plants waste ...
-
Manufactured by Körting Hannover AGbased in GERMANY
Oil / Gas burner with blower in Monoblock construction form with digital firing management up to 16 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you