Burner Systems Equipment For Energy Management In Canada
-
Manufactured by Agrofrost NVbased in BELGIUM
If we look at the excisting burners on the market, we notice several important disadvantages: there is only 1 burner that ejects hot air into the air at 1 point. This means that most of the time, the heated air is not in the center of the air stream of the fan. Therefore, more than 50 % of the energy is lost. So the efficiency is very poor. the burners run on diesel oil, so they are very ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's BoilerSpection MB imaging system utilizes special mid-wave infrared detectors to see through flames. This unique feature means BoilerSpection MB can provide the clearest and most stable through-flame images in boilers, furnaces, kilns, or ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
Manufactured by Saskatoon Boiler Mfg. Co. Ltdbased in CANADA
Saskatoon Boiler offers a wide assortment of boilers specially designed for rugged use in the oil field. Developed over many years based on feedback from oil field operators, Saskatoon Boilers have developed a reputation for toughness and dependability under the harshest ...
-
Manufactured by Gasmaster Industries Ltd.based in CANADA
Dual fuel industrial boiler capable of heating up to 80 apartment ...
-
Manufactured by Gasmaster Industries Ltd.based in CANADA
1,500,000 BTU/HR high efficiency condensing industrial ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The GPC general purpose chamber furnaces are large floor-standing models. Available at 1200 °C and 1300 °C with capacities ranging from 131 to 350 litres. The following models have been renamed CWF: GPC 12/36, GPC 13/36, GPC 12/65 & GPC ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301 Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air ...
-
Manufactured by Carrier Vibrating Equipment, Inc. / Carrier Europe S.C.Abased in BELGIUM
Non-Vibrating Tornesh Dryer including: All stainless steel construction. Screw conveyor with 2 HP motor for feeding ...
-
Manufactured by Easy Kleen Pressure Systems Ltdbased in CANADA
Easy Kleen offers a full range of Dry Steam Generators used for a wide variety of ...
-
Manufactured by Groupe Simoneau Inc.based in CANADA
The D-Type watertube model represents one of the most popular and reliable configuration for watertube boilers. Commonly used for saturated steam applications with capacities up to 200,000 PPH, its two large drums will always be ready to unleash power on demand. Optional superheater or external economizer also available to meet your specific ...
-
Manufactured by Infratech Corporationbased in CANADA
Infratech gas waste incinerators and thermal oxidizers are designed to meet applicable emission and ground level concentration regulations. Our designs ensure a predictable Destruction Efficiency and substantially reduced auxiliary fuel consumption requirements. Our continuous duty gaseous waste incinerators/oxidizers are designed to suit specific waste streams, waste volumes and process ...
-
Manufactured by Polivinil Rotomachinery S.P.A.based in ITALY
State of the art machine for rotational moulding, with reduced floor space and high load capacity. Possible configuration with 1 or 2 carriages, with central oven and two stations on each side of the oven for cooling/loading/unloading. The same arm can do two consecutive cycles, whilst the other is either waiting or is being serviced, or not operational due to tests or for arm change to straight ...
-
Manufactured by Trecan Combustion Limitedbased in CANADA
The Trecan 80-PD has a capacity of melting 80 tons of snow per hour, its 15 million BTU/hr burner can melt 200 to 400 cubic yards of snow with an average snow density of 15 to 30 lbs/cu. ft. per hour. The 80-PD model is a favorite choice of snow contractors, shopping centers and ...
-
Manufactured by Pyradiabased in CANADA
By adding heat recovery system to your thermal oxidizer you can recover up to 70% of the combustion heat. This represents significant energy savings. The system allows your to re-use the heat generated from the previous airstream in order to reduce the energy needed. With one of PYRADIA's heat recovery systems you can easily turn your pollutants into free energy and save ...
-
Manufactured by Dynablast a division of John Brooks Company Limitedbased in CANADA
Fuel Oil Heated up to 3500PSI and Features: 690,000 BTU Burner, Heat Rise 7 gpm @ 165°F, Steam Control, High Pressure & Steam Operating Valves, Momentary Test, Flow & Thermostat, Fuel use # 1 or # 2, Assembled in ...
-
Manufactured by Gasmaster Industries Ltd.based in CANADA
The HC 2000 is an industrial boiler unit capable of heating up to 40 apartment units. It offers an input level of 2,000,000 BTU/hr and has a variety of burner and control ...
-
Manufactured by Gasmaster Industries Ltd.based in CANADA
The NX 2000 is an industrial boiler unit capable of heating up to 40 apartment units. It offers an input level of 2,000,000 BTU/hr and has a variety of burner and control ...
-
Manufactured by Gasmaster Industries Ltd.based in CANADA
The NX 1000 is an industrial boiler unit capable of heating up to 20 apartment units. It offers an input level of 1,000,000 BTU/hr and has a variety of burner and control ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you