Burner Systems Equipment For Energy Management
-
Manufactured by Space-Raybased in USA
The PGR series heater offers maximum flexibility in hospitality and golf range applications. This range of heaters can provide warmth in the windiest conditions and will blend into the surroundings. The decorative grill provides an aesthetically appealing look that will please any building ...
-
Manufactured by Bigtem Makine A.Sbased in TURKEY
Used for roasting of cored peppers by loading on 100mm height stainless steel studs, which are excentricly installed on dual chain tracks, with 100mm spacing. Inner surface of the tunnel is supplied with 1400 C heat resistant firebrick and outer surface is filled with 50mm glasswool for isolation. Machine will be supplied with single stage lpg, lng, cng, natural gas burner, ...
-
Manufactured by ThermTech Limitedbased in UNITED KINGDOM
A typical natural gas fired 3-pass shell boiler raising steam at 10 bar g will exhaust flue gases to atmosphere at approximately 230°C making it a valuable source for heat recovery. The treated water fed to the boiler from the storage tank is typically maintained at a temperature of 80-85°C. ...
-
Manufactured by BTI Gumkowski Sp. z o.o. Sp.k.based in POLAND
VENTURA Air Heater main advantages: three-pass, counter-flow-cross heat exchanger, system of even air distribution through the exchanger and automatic ash removal. The combination of these solutions gives better efficiency in air heating and thus stands out from the solutions offered on the market. The heater uses a rotating ROTARY burner, which allows to maintain very good combustion parameters ...
-
Manufactured by Vapor Power Internationalbased in USA
The Vapor Power Superheater is a coil tube design, similar to our steam generators. Saturated steam enters at the inlet of the superheater, passes through a set of coils, and hot combustion gases envelop the entire tube surface to achieve very high heat transfer rates. Superheated steam leaves the superheater at the steam outlet manifold. The fuel and combustion air is controlled by a linkageless ...
-
Manufactured by Spaulding Manufacturing.,Inc.based in USA
The Spaulding RMV Auger Trailer is a trailer that comes built much like the Roadsaver Hot box, but has a built in high power hydraulic auger in the hopper. This rugged machine can empty a full four ton hopper in just ten minutes. This hopper is triple walled, and comes equipped with three burners attached for fast even heat. Also the RMV Auger Trailer Hot Box comes with hydraulic loading top ...
-
Manufactured by Step Proiect SRLbased in ROMANIA
It’s the first of a new generation: with its sophisticated slim, curved design and fully integrated welding hose-pack and utility cables, the brand new FANUC ARC Mate 100iD offers new possibilities for improved productivity and faster ...
-
Manufactured by Clear Rush Co.based in CANADA
The BGR Cube is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, pneumatic devices, or storage tanks. The BGR Cube eliminates the need to install expensive vapour recovery units (VRU) or uneconomical incinerators that provides an economical alternative to venting or ...
-
Manufactured by Axinarbased in GREECE
Pelletwork is Axinar’s flagship product. Its robust design, its excellent performance and easy use are the properties that make it the top integrated heating solution. Its modular design includes an auto-cleaning, new generation Pelit Boiler with multiple flue gas paths, an analog burner with internal screw feeder, an auger, which ensures the smooth feeding of the burner with pellets, and ...
-
Manufactured by RJM Internationalbased in UNITED KINGDOM
RJM has been developing its own ultra-low NOx burner technology since the company was founded in 1977. With applications to suit every firing configuration and all coal types, including lignite and high moisture coals, RJM has a proven burner solution that can minimise or obviate the need for secondary NOx reduction ...
-
Manufactured by Cire Technologies, Inc.based in USA
Cire Technologies supplies impingement dryers to the full range of paper, film, foil, metal coil and textile web converting industries. These impingement dryers range from press dryers to adhesive coating dryers over one hundred feet long. Our impingement dryers utilize state of the art construction proven by years of successful ...
-
Manufactured by Garioni Naval - a brand of SVECOM PE Srlbased in ITALY
Over 5000 units installed in every field of industry, from laundries to large chemical pharmaceutical, textile and mechanical factories have brillantly solved the problem of steam production at low costs. In the range of the model for producing steam power from 120 up to 8000 Kg/h, you can find the most suitable for your needs or realize high power plants with several units working ...
-
Manufactured by Cire Technologies, Inc.based in USA
Cire Technologies designs and fabricates complete gas fired, indirect heaters for heated process air. These heaters are used to marry the low cost of heating with natural gas with the requirements of the process to avoid process air contact with a burner. Typical applications include silicone coating dryers and clean room processes. Our indirect heaters utilize natural gas fired nozzle burners, ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
Among the many various process heater types and configurations, there are a few which are so unique in design and required performance that a very specialized burner is required. One of our areas of expertise at Callidus is the development of high-quality burners for these unique ...
-
Manufactured by Dieffenbacher GmbHbased in GERMANY
Adequately proportioned combustion chamber for a long retention time at over 850 °C. Short installation times and a low level of wear. Maximum availability and life time. Complete burn-out with low ...
-
Manufactured by Körting Hannover AGbased in GERMANY
Parallel-flow lance burners for use at melting pots in the glass industry where stricter emission demands are to be ...
-
Manufactured by Mawerabased in UNITED KINGDOM
Design and Operation: Apart from biomass, the flat moving grate is particularly designed to burn wood fuel with a high ash content and a high share of contaminants, such as sand, glass, scrap metal, etc. Significant advantages of the flat moving grate combustion Type FSR are: 1. reliable operation due to the heavy-duty design, and 2. low particulate matter with recirculation of five gases and ...
-
Manufactured by Mitsubishi Hitachi Power Systems, Ltd. (MHPS)based in USA
Mitsubishi Hitachi Power Systems firing systems and components cover a practically unlimited range of gaseous, liquid and solid fuels. The DS® Burner is developed and optimized for a variety of pulverized fuels. As a designer and manufacturer of original parts, we are an ideal partner for modernization and retrofit projects. Depending on fuel property, emission standards, and gas recycling, ...
-
Manufactured by Ebico (China) Environment Co., Ltd.based in CHINA
EBICO EC heavy fuel oil asphalt mixing plant burner is designed and developed for the equipment of the asphalt mixing plant. While adhering to the four major concepts of European products, which focus on safety, environmental protection, energy-saving, and intelligence, this burner has passed a lot of experiments for different environments and fuels in different markets, and EBICO has gained many ...
-
Manufactured by FlammaTec, spol. s r.o.based in CZECH REPUBLIC
FT heavy oil injector has a unique atomizing solution that results in optimal heat transfer from combustion to the glass melt, one of the highest furnace efficiencies, and extremely low emission when replacing conventional ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you