CHP Engine (Cogeneration) Equipment
-
Manufactured by IMFsoft, s.r.o.based in CZECH REPUBLIC
Independed ignition up to 12 valves for cogeneration units engines. Fuel mixture management based on data from Lambda controller. Flap controll by actuator or stepper motor. Lambda probe Bosch LSU 4.9 for unbeatable prices. ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Digestate Concentration System (DCS) reduces the volume of digestate from anaerobic digestion while increasing its value. In most situations, it is able to do this using surplus heat from the CHP engine or biogas boiler, which can be used up to four times by incorporating multi-effect evaporation ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Gas engines are highly efficient at providing the stimulus for the growth of plants, whilst in parallel providing a flexible supply of electrical power. Heat, light and carbon dioxide (CO2) all promote plant growth. Gas engines provide electrical power at the alternator and when in a cogeneration configuration can also recover useful heat. ...
-
Manufactured by Scherzinger Pumps GmbH & Co.KGbased in GERMANY
Automobile engines can be converted for use as CHP engines and stationary operation. It is crucial here that the aggregate is permenantly supplied with fresh oil. SCHERZINGER offers you a solution for this: Our oil pumps ensure the necessary pressurization prior to the initial use; they can be used for oil changes, and they assume the bypass ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
countries in the 20th Century. Gas engines utilising syngas as a fuel can be configured in a combined heat and powerconfiguration in order to maximise the efficiency of the ...
-
Manufactured by SunCoal Industries GmbHbased in GERMANY
. Prices can range up to 250 USD/ton. In addition, SunCoal and the Technical University of Munich have developed an entrained-flow gasifier for the production of syngas from biocoal. Syngas can be used in CHP engines for the generation of heat and ...
-
Distributed by MRU Instruments - MRU Gas Analyzerbased in USA
The SWG-100 Compact is a cost effective stationary biogas analyzer designed for discontinuous measurement. It has user programmable settings for up to 24 measurements per 24 hours. It is typically used in the harsh industrial environments of combined heat and power (CHP) engine gas monitoring. -Plug & play, pre-calibrated sensors -Safety in ...
-
based in NETHERLANDS
50 ppm. These features have a significant positive impact on the life duration and running costs of the CHP engine and efficiently facilitate the upgrade of biogas to natural gas ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and ...
-
Manufactured by GGE Power Pvt. Ltd.based in INDIA
, will protect your CHP engine and other equipment from corrosion and minimize long term maintenance ...
-
Manufactured by Alvan Blanch Development Company Limitedbased in UNITED KINGDOM
The main reason for drying biomass is to increase the combustion efficiency by de-watering the biomass products. The solid biomass system has drawn more attention to utilising waste heat from biomass boilers and CHP engines as a biomass drying process. Further encouraged by various government renewable heat schemes (such as RHI) solid ...
-
Manufactured by GTP Solutions GmbHbased in GERMANY
State-of-the-art gas engine CHP-pants in container design or as building ...
-
based in GERMANY
In the field of decentralized power supply Kuhse provides control technology for CHP and gas engine operated plants from the engineering and commissioning up to maintenance. KUHSE controls and switchgear are utilized in the 10-6000 kW power range for combined heat and power plants on a gas and dual fuel engine basis. The unit ...
-
Manufactured by NVC Olsonfabbased in CANADA
Standby, Prime and Peaking Power; and Cogeneration (CHP) and Reciprocating engine, Generator Enclosures, Silencing Systems and Complete Packages. ...
-
Manufactured by ENERTRAGbased in GERMANY
to supply fuel cells in emergency power supply units. The hybrid power plant consists of 3 wind turbines of the type Enercon E-82 and two engine CHPs, which can be operated with biogas as well as with a mixture of biogas and hydrogen. Hydrogen is produced and stored from wind energy at times of strong winds, and the hydrogen is converted ...
-
Manufactured by Fleetsolvebased in UNITED KINGDOM
Our CHP is a proven and reliable technology that is powering many high profile buildings in the UK. Registered with the CHPA. A single renewable fuel can produce up to four types of output power, heat , cooling and steam and reduces whole of life energy costs. It has the best carbon reduction benefit to capex ratio of any of the low ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you