Cogeneration Engine (Cogeneration) Equipment
-
Manufactured by IMFsoft, s.r.o.based in CZECH REPUBLIC
Independed ignition up to 12 valves for cogeneration units engines. Fuel mixture management based on data from Lambda controller. Flap controll by actuator or stepper motor. Lambda probe Bosch LSU 4.9 for unbeatable prices. ...
-
Manufactured by Tecogen, Inc.based in USA
The InVerde e+ module is the first and only clean natural gas engine-driven cogeneration system able to operate within the extremely low levels of regulated pollutants allowed by the distributed generation regulations for 2007 set by the California Air Resources Board (CARB). The InVerde e+ emissions not only meet but exceed the stringent ...
-
Manufactured by Burkhardt GmbHbased in GERMANY
Working on the principle of combined heat and power, cogeneration units produce both electrical power and usable heat. This uses some 90 % of the heat available from the fuel consumed, saving significant amounts of primary energy and CO2 emissions. The energy is produced exactly where it is required, thus avoiding transport losses. That ...
-
based in ITALY
Biogas, if not dehumidified cannot be sent directly through the cogeneration ...
-
Manufactured by R Schmitt Enertec GmbHbased in GERMANY
The ENERGIN M series Gas engines form the base for a range of efficient power generation products. Depending on your projects requirement you can choose the best fit from our wide range of generator sets with and without heat recovery and cogenerators. The engines are designed and manufactured by R Schmitt Enertec in Mendig, ...
-
Manufactured by TEMPCO S.r.l.based in ITALY
Skid package units for fuel preheating in engines and cogenerating plants. Possible execution with electric heaters Working temperature ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Gas engines based cogeneration, or combined heat and power (CHP), offers a range of potential benefits to industrial applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner of ...
-
Manufactured by PSW-Energiesysteme GmbHbased in GERMANY
Gas or diesel engine-driven cogeneration system with a built-in hot water tank, for heating & decentral power generation at your home or small ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The 501-KB5 aeroderivative gas turbine engine shares commonality with the other single-shaft 501-K engines. Its low mass flow and high exhaust temperature makes the KB5 the ideal engine for ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the other systems ...
-
Manufactured by B:POWER, a. sbased in CZECH REPUBLIC
The German technology from the company DURR has the biggest offer of products at all. It is possible to use small ORC units DURR CYPLAN from 40kW of electric output up to large 500kW generators. They are divided into two types – direct connection of flue gases (up to 250kWel) and with the oil management (350kWel and ...
-
based in SPAIN
The use of the Fuel-oil Enhancer improves the fuel’s properties, ensuring more efficient installations or engines without the need for prior adjustments or alterations, while avoiding the high levels of pollution associated with these fuels. SOL POWER Plus Fuel, is an Enhancement Reagent that hydro-oxygenates fuels when added in a ...
-
Manufactured by NVC Olsonfabbased in CANADA
Standby, Prime and Peaking Power; and Cogeneration (CHP) and Reciprocating engine, Generator Enclosures, Silencing Systems and Complete Packages. ...
-
Manufactured by Aningas-Ergos S.A.based in SPAIN
ANINGAS Thermal fluid heaters from 10.000 kcal/h to 10.000.000 kcal/h. Maximum service temperature up to 410ºC ...
-
Manufactured by Air Industrie Thermique EspaƱa, S.L. (AITESA)based in SPAIN
Allow steam generation (saturated or superheated) and superheated water from flue of furnaces, gas turbines, waste liquid incinerators (HCL, H2SO4) or waste gas incinerators (Off-gas, biogas, SH2…), fuel-oil engines (2 stroke or 4 stroke), gas engines in cogeneration ...
-
Manufactured by IMFsoft, s.r.o.based in CZECH REPUBLIC
For use in all types of motorcycles, oldtimers, go-karts, cars, motor-cross-seaters, simply for general use from hobby to professional racing and aircraft engines, turbines, cogeneration units, generating stations and other applications with 1, 2 and 4 cylinders. Easy installation and setup. Please note: the documentation is uniform for all ...
-
Manufactured by Burkhardt GmbHbased in GERMANY
The V 3.90 Burkhardt wood gasifier, together with the ECO 180 HG (with pilot injection gas motor) combined heat and power plant or the ECO 165 HG (petrol engine), delivers electrical and thermal energy from wood pellets. Depending on which CHP we use, we are able to generate 260 - 270 kW heat and 165 - 180 kW of ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A GE Jenbacher gas engine module is configured for the recovery of both electricity and heat via a cogeneration / CHP configuration. As with the genset, the gas engine is linked to the alternator which produces electrical power for export. The cooling water circuits of the engine are first linked to a plate heat exchanger which ...
-
Manufactured by Aningas-Ergos S.A.based in SPAIN
Steam boilers, hot water boilers and superheated water boilers: Steam Shell boilers from 250 to 50.000 kg/h. Design pressure PS up to 25 bar. Saturated steam or superheated steam. Hot water boiler from 60.000 to 20.000.000 kcal/h and superheated water to 190ºC. Sprint steam generators (water-tube) from 300 to 2.000 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you