Gas Cogeneration (Cogeneration) Equipment
-
Manufactured by AB Holding SpAbased in ITALY
The ECOMAX Natural Gas line makes available to the industrial and commercial sector cogeneration plants fueled with methane gas, which combine structural compactness and versatility with high energy ...
-
Manufactured by Hofstetter Gastechnik AGbased in SWITZERLAND
Turn your landfill gas into heat and electricity. Methane, which is a main compound of landfill gas, causes 21 to 27 times more global warming than CO2 and presents a potential risk of explosion, intoxication and fire. Through our cogeneration units, the methane in landfill gas is not only safely decomposed but turned into ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced industrial CO2 emissions and saves natural energy ...
-
Manufactured by Tecogen, Inc.based in USA
The InVerde e+ module is the first and only clean natural gas engine-driven cogeneration system able to operate within the extremely low levels of regulated pollutants allowed by the distributed generation regulations for 2007 set by the California Air Resources Board (CARB). The InVerde e+ emissions not only meet but exceed the stringent ...
-
based in USA
GT MASTER® simulates performance of a given plant at different operating conditions, such as different ambients, loads and control set-points. A GT MASTER plant model is defined by its hardware, by contrast with a GT PRO model which is defined by the assumptions used to create the hardware. The 4,000+ inputs which define plant hardware and control set-points are all initialized upon ...
-
based in USA
GT PRO® automates the process of creating a combined cycle or gas turbine cogeneration plant design, guiding the user to rapidly and easily attain an optimal configuration and technical parameters. The user inputs design criteria, starting with the big picture and progressing in a logical sequence into greater details. Built-in expert ...
-
based in USA
PDETM (Plant Design Expert) is an intelligent shell that uses the GT PRO/GT MASTER design and simulation engines. PDE is a compact expert program, with built-in logic to create and configure suitable gas turbine power and cogeneration plants based on the user’s electricity and heat demands, site parameters, and constraints. It ...
-
Manufactured by Cain Industries, Inc.based in USA
The UTR Series is applied when both a compact rectangular configuration and maximum heat transfer surface/performance is critical. The variety of model sizes allow the UTR to be located within the gen-set housing to meet critical space limitations. Flexible exhaust gas connection locations and sizes also allow the UTR to adapt easily to an ...
-
Manufactured by Cain Industries, Inc.based in USA
The fully packaged ESG1 is selected from 48 pre-engineered standard models with output capabilities of 20 to 500 boiler hp and operating steam pressures from 3 to 450 psig. The ESG1 is shipped complete, ready for operation as either a primary or supplemental steam ...
-
Manufactured by Cain Industries, Inc.based in USA
100 different face areas available, unlimited rows deep, many possible selections adapt easily to the design needs. The capability of quickly removing fin tube rows or core assemblies from the shell, without disturbing the exhaust gas connections, reduces down time and allows for easy periodic inspection and cleaning as ...
-
Manufactured by Cain Industries, Inc.based in USA
The HRSR Series is designed to receive total liquid flow, reduce gas temperatures to desired levels, and lower exhaust noise reducing the need for a muffler. The modulating exhaust bypass assembly will allow the tempering of exit temperatures to achieve optimal heat recovery. The radial design allows finned tube access for cleaning and ...
-
Manufactured by Cain Industries, Inc.based in USA
piping, within a main liquid flow loop, provides for simple and less costly piping modifications. HRSA models are available to accommodate entering gas temperatures from 400°F up to 1,600°F. The required heat transfer surface, coupled with a small diversion of the main flow, adequately recovers desired BTU/hr which lowers the outlet ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Gas engines based cogeneration, or combined heat and power (CHP), offers a range of potential benefits to industrial applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner of ...
-
Manufactured by G-Team, a.s.based in CZECH REPUBLIC
Micro turbines up to the capacity of 3 MW. Steam turbines up to the capacity of 10 MW. Turbines with overhung impeller. Turbines with the impeller between the bearings. Turbines with a frequency converter. Multi-stage turbines. Gas expansion turbines. Cogeneration ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A fuel gas dehumidifier or gas drier is an ancillary system to a gas engine that is used to remove moisture from the fuel gas for the cogeneration system (dessication). The removal of water from the fuel gas helps to optimise the combustion process in the engine, prevents condensation and helps ...
-
Manufactured by f.u.n.k.e. SENERGIE GmbHbased in GERMANY
f.u.n.k.e. SENERGIE GmbH builds, supplies and operates turnkey CHP units based on natural gas and propane gas, sewage gas and biogas with nationwide service. Our product program for sewage gas plants includes cogeneration heat and power plants (CHP) of 30 to 500 kWel. In addition we produce units for ...
-
Distributed by ap+mbased in USA
generator with a 16-stage compressor, annular combustor, two-stage high pressure turbine, and an aerodynamically coupled power turbine. The GE LM2500 has applications ranging from gas line compression, cogeneration and offshore platform power to naval and cruise ship ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the other systems ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
of supply is an important factor for their selection of power production equipment and gas is abundant, gas-based cogeneration systems are ideally suited as captive power plants (i.e. power plants located at site of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you