Cogeneration Equipment For Energy Management In Australasia
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
A gas turbine engine is a type of internal combustion engine. Essentially, the engine can be viewed as an energy conversion device that converts energy stored in the fuel to useful mechanical energy in the form of rotational power. The term “gas” refers to the ambient air that is taken into the engine and used as the working medium in the energy conversion ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Before the coarse filtered bio or sewage gas can be fed to the gas consumer it is normally passed through a ceramic fine fillter. Here the gas is passed through a ceramic or reclay unit with a pre-determined pore diameter. Fine particles < 150 – 210 μm and condensate vapour are effectively removed. This eliminates any possible damage to components further on in the gas processing ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar Digital is the global organization responsible for InSight Platform™ technology and the relentless innovation of the entire ecosystem, capabilities and customer user experience. We are obsessively customercentric with a passion for cutting edge technology. With deep expertise in machine data acquisition, cyber security, software development, OEM product knowledge, and big data ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar's modular concept for gas turbine generator sets has been optimized for transportation and the scope has been minimized for civil works with our Power Generation Module (PGM). Good for non-hazardous applications only, our PGM solution results in shorter installation and commissioning times, and reduces overall costs for our ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Digestate Concentration System (DCS) reduces the volume of digestate from anaerobic digestion while increasing its value. In most situations, it is able to do this using surplus heat from the CHP engine or biogas boiler, which can be used up to four times by incorporating multi-effect evaporation ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS G Series is a complete stainless steel multitube heat exchanger designed specifically for exhaust gas cooling and thermal recovery applications. Similar to the HRS K Series, the exhaust gases flow through the interior tubes and the service fluid flows through the surrounding shell. Using our corrugation technology, heat transfer and efficiency are increased over standard smooth tube ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
If you need electricity and thermal energy simultaneously, a cogeneration system may be your solution, and can offer a favorable return on investment. Cogeneration allows you to benefit from two or three forms of energy for the price of one, with minimal environmental impact. These systems can turn clean-burning natural gas into cost-effective, reliable electricity, use steam for production ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the other systems can be used to achieve overall system efficiencies of ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A GE Jenbacher gas engine module is configured for the recovery of both electricity and heat via a cogeneration / CHP configuration. As with the genset, the gas engine is linked to the alternator which produces electrical power for export. The cooling water circuits of the engine are first linked to a plate heat exchanger which facilitates the transfer of hot water to an external hot water ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Trigeneration or combined cooling, heat and power (CCHP), is the process by which some of the heat produced by a cogeneration plant is used to generate chilled water for air conditioning or refrigeration. An absorption chiller is linked to the combined heat and power (CHP) to provide this functionality. Quadgeneration takes this process one step further with the addition of systems to purify ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the diary industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the dairy’s cooling ...
-
Manufactured by Freudenberg Filtration Technologiesbased in GERMANY
Fuel cells react sensitively to salts, nitrous oxides or compounds with sulfur or ammonia, which can enter the process via the intake air. Effective filtration is therefore essential in order to protect the sensitive components and ensure greater safety. Our filter media are specially developed for the unique requirements of fuel cells. micronAir filters effectively protect the catalyst material ...
-
Manufactured by 2G Energy AGbased in GERMANY
The profitable natural gas CHP by 2G with an electrical output range between 20 and 50 kW is called g-box. It is ideally suited to highly frequented and noise-sensitive areas such as hotels and education institutes while also shining with excellent efficiency scores. This unit is the ideal complement to existing photovoltaic and heating systems. At the same time, its installation and ...
-
Manufactured by Alvan Blanch Development Company Limitedbased in UNITED KINGDOM
The main reason for drying biomass is to increase the combustion efficiency by de-watering the biomass products. The solid biomass system has drawn more attention to utilising waste heat from biomass boilers and CHP engines as a biomass drying process. Further encouraged by various government renewable heat schemes (such as RHI) solid biomass (including solid biomass contained in waste) system ...
-
Manufactured by Alvan Blanch Development Company Limitedbased in UNITED KINGDOM
The main reason for drying biomass is to reduce the overall energetic efficiency, prior to the biomass combustion and storage. Further encouraged by various government renewable heat schemes (such as RHI) solid biomass (including solid biomass contained in waste) system has drawn more attention to utilising waste heat from biomass boiler as well as biomass drying process. Alvan Blanch customers ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the brewery industry. Electricity and heat recovered from a gas engine can be deployed at high efficiency for useful onsite use. This gives the ability to reduce operational costs and reduce carbon emissions. Converting the heat into cooling via absorption chillers is called combined cooling heat and power (CCHP) or ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Syngas, also known as synthesis gas, synthetic gas or producer gas, can be produced from a variety of different materials that contain carbon. These can include biomass (wood gas), plastics, coal, municipal waste or similar materials. Historically town gas was used to provide a gas supply to many residences in Europe and other industrialised countries in the 20th Century. Gas engines utilising ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Trigeneration or combined cooling, heat and power (CCHP), is the process by which some of the heat produced by a cogeneration plant is used to generate chilled water for air conditioning or refrigeration. An absorption chiller is linked to the combined heat and power (CHP) to provide this functionality. Quadgeneration takes this process one step further with the addition of systems to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you