Cogeneration Equipment For Energy Management
-
Manufactured by G-Team, a.s.based in CZECH REPUBLIC
Micro turbines up to the capacity of 3 MW. Steam turbines up to the capacity of 10 MW. Turbines with overhung impeller. Turbines with the impeller between the bearings. Turbines with a frequency converter. Multi-stage turbines. Gas expansion turbines. Cogeneration ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Syngas, also known as synthesis gas, synthetic gas or producer gas, can be produced from a variety of different materials that contain carbon. These can include biomass (wood gas), plastics, coal, municipal waste or similar materials. Historically town gas was used to provide a gas supply to many residences in Europe and other industrialised countries in the 20th Century. Gas engines utilising ...
-
Manufactured by Christof Industries GmbHbased in AUSTRIA
Christof Industries’ Greentech© technology represents a revolutionary method of producing energy from biomass by means of wood gasification. This three-step thermo-chemical incineration process (pyrolyse, oxidation, reduction) converts dried woodchips into combustion ...
-
Manufactured by Stopson Italiana S.r.l.based in ITALY
STOPSON ITALIANA has been on the soundproofing global market for decades as one of the main manufacturer of soundproofing enclosures and control cabins. The equipment provided can satisfy all high-level technical specifications and custom-made requirements, to acoustically isolate noisy machinery or create quiet rooms. Machinery soundproofing into appropriate enclosures, which provides total ...
-
Manufactured by Kinsley Groupbased in USA
The Micro T is a compact and quiet micro-CHP system, ideal for multi-family housing and small commercial buildings, such as boutique hotels, retail stores and recreational facilities. With fuel-flexibility to operate on natural gas, biogas, or propane, the Micro T can be applied to a wide variety of applications. The system is UL certified and delivered to the site as a complete CHP system in one ...
-
Manufactured by Schmid Energy Solutionsbased in SWITZERLAND
With the “HLT-100 compact” hot air turbine, electricity can be generated with a wood firing system from a thermal offtake of 300 kW. Due to their complexity and maintenance requirements, other systems – such as ORC systems or steam turbines – only become worthwhile as large-scale systems with a thermal capacity above 2 MW. In many cases, heat offtake all year round cannot ...
-
Manufactured by SUGIMAT S.Lbased in SPAIN
SUGIMAT develops heaters for cogeneration systems through ORC (Organic Rankin Cycle) turbines. Our scope of supply covers from the design and manufacturing of the heater up to a turnkey project. The main advantage of these machines is the use of the energy contained in the biomass, through the combined power and themal generation in the form of hot water. Efficiency can reach 98%. These machines ...
-
Manufactured by Zorg Biogas GmbHbased in GERMANY
Biogas, syngas, biomethane and landfill gas always contain water vapor in an unsaturated state. During combustion, the water vapor results in considerable corrosion damage to the gas engines and turbines. Malfunctions caused by damage leads to significant downtime and higher repair costs. The use of a gas dehumidification system can considerably extend the engines’ service life and notably ...
-
Manufactured by Jiangsu Huade Hydrogen Energy Technology Co.,Ltdbased in CHINA
CarNeu-5 fuel cell CHP system consumes pure hydrogen (99.97% purity) and generates zero-emmission electrical energy and thermal energy at the same time. Coupled with green hydrogen produced by green electricity, it is an ideal solution as constant power and heat supply for multi-family houses, villa and for small commercial buildings, such as hotel, resort, shopping mall, etc. Besides, combined ...
-
Manufactured by Zorg Biogas GmbHbased in GERMANY
Single stage biogas compressor with single impeller and a maximum capacity 915 m³/h. It is used to transport biogas and other gases from tanks, gasholders to biogas burners and cogeneration units (CHP). The 18,5 kW electric motor is connected via a flexible coupling. Horizontal ...
-
Distributed by ap+mbased in USA
ap+m supplies parts and services for many types of GE aeroderivative gas turbines. Below are some of the more commonly used engine types. The GE LM2500 is the workhorse of aeroderivative gas turbines, with more than 1,500 units in service and over 22 million operating hours with a variety of fuels and fuel/water combinations. Availability for the GE LM2500 is an outstanding 99.6%, requiring just ...
-
Manufactured by Alvan Blanch Development Company Limitedbased in UNITED KINGDOM
The main reason for drying biomass is to increase the combustion efficiency by de-watering the biomass products. The solid biomass system has drawn more attention to utilising waste heat from biomass boilers and CHP engines as a biomass drying process. Further encouraged by various government renewable heat schemes (such as RHI) solid biomass (including solid biomass contained in waste) system ...
-
Manufactured by Mapnerbased in SPAIN
Using an eccentric rotor and mobile blades makes it possible to offer an effective solution where high pressures are required (within low pressures) and with considerable flows; it is used in Cogeneration processes as well as in different Industrial Processes (Pneumatic Transport, Agitation, Slurry, ...
-
Manufactured by Expander Tech S.L.based in SPAIN
Rank® HTC machines are specially designed for cogeneration applications with high-temperature thermal needs, and they can produce useful heat as hot water at 80 °C. In addition, using heat at temperatures between 180 °C and 210 °C, the maximum electric efficiency is achieved. Within the range of Rank® HTC category, we find different products that produce electrical energy ...
-
Manufactured by OnPower, Incbased in USA
OnPower, Inc.’s unique, industry leading mobile package provides a rugged, low-maintenance option with high efficiency and performance. The unit can be run on gas or liquid fuel and is also available with a duel fuel option that can be run in remote locations for applications such as emergency services and cogeneration. OnPower, Inc. is the sole owner of this mobile package design. ...
-
Manufactured by Enertec Kraftwerke GmbHbased in GERMANY
Landfill gases are created during the natural decomposition of waste, which in addition to carbon dioxide (CO2) and methane (CH4) also contain traces of other pollutants. Thanks to their high methane content, these landfill gases can easily be used as fuel in a CHP. Electricity and heat are thus available for subsequent ...
-
Manufactured by Alvan Blanch Development Company Limitedbased in UNITED KINGDOM
The main reason for drying biomass is to reduce the overall energetic efficiency, prior to the biomass combustion and storage. Further encouraged by various government renewable heat schemes (such as RHI) solid biomass (including solid biomass contained in waste) system has drawn more attention to utilising waste heat from biomass boiler as well as biomass drying process. Alvan Blanch customers ...
-
Manufactured by H.Cegielski - Poznań S.A.based in POLAND
The power of biogas plants starts at 0.4 MW, depending on the Customer’s ...
-
Manufactured by Mion Ventoltermica Depurazioni S.p.A.based in ITALY
Mion Ventoltermica has for many years designed, built and installed systems used for the treatment, processing (drying, shredding and crushing, transportation of the refined product, suction of processing waste and filtration of process air) and the energy recovery (treatment of combustion fumes with heat recovery) of the biomass in all its ...
-
Manufactured by Tecogen, Inc.based in USA
Tecogen’s Tecopack is a pre-engineered, microgrid enabled, “plug-and-play” CHP plant established around Tecogen’s flagship InVerde e+. Tecopacks are available in 250 and 500 kW sizes and use two to four variable speed InVerde e+ modules to achieve the nameplate rating. Several Tecopack containerized solutions can be paired together to reach larger plant sizes (1 MW and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you