Combustion Plants Equipment For Energy Management Available In Canada
-
Manufactured by Polytechnik Luft- und Feuerungstechnik GmbHbased in AUSTRIA
Air and water-cooled horizontal and step grates. Grateless firings and combinations. Stationary fluidised ...
-
Manufactured by Linka Energy A/Sbased in DENMARK
A combustion plant based on wood chips consists of a scraper unit, which is sensibly located near the storage. 3 horizontal scrapers are positioned in the storage area which feed the chips to a sunken auger at the end of the scraper system. This auger is monitored by a photo cell. Whenever the auger is not filled, hydraulic cylinders will activate the scraper unit, and continue until the auger is ...
-
based in ITALY
Operating Principals: The unit is mainly made up with a shell and tube heat exchanger and a combustion chamber equipped with a modulating burner. The gas containing V.O.C. is preheated passing through the shell and tube heat exchanger up to a temperature close to 450 ÷ 550 °C by mean of the heat released by combustion gases which pass through the shell side of the same heat exchanger, ...
-
Manufactured by Zanni Groupbased in GERMANY
Waste treatment in modern waste incineration plants makes it possible to mineralise the residual waste, reduce the volume of waste, save on landfill volume, reduce waste emissions (including methane, a dangerous greenhouse gas), remove harmful or hazardous components, provide thermal energy and, if there is sufficient thermal combustion energy, produce electricity. ...
-
Manufactured by ERK Eckrohrkessel GmbHbased in GERMANY
Stationary fluidised bed combustion systems are universally applicable due to their fuel-oriented versatility using slurry, waste and hard coal, and the possibility of incinerating various fuels at the same time. Fluidised bed combustion systems have a simpler design and are thus low cost. Using fluidised beds is more difficult than operating a grate system as a result of trying to keeping ...
-
Manufactured by Lamtec GmbH & Co.KGbased in GERMANY
Low loss of pressure through optimisation. Immediate, repeatable ignition in every firing rate. Highest flame stability. Safe flame monitoring. Modular design. SIL 3 certified. Intermittent or continuous operation.Protection class up to IP 67. Thermal power up to 3,000 kW. Flame length up to 2,500 mm. Pilot burner length up to 6 m. Fuel: natural gas, LPG (liquid propane gas), coke gas, refinery ...
-
Manufactured by Zhengzhou Boiler Co., Ltd. (ZBG)based in CHINA
Product Category : Steam Boiler Type: SZL Capacity: 4~25t/h Pressure: 1.25~3.82Mpa Temperature: 194~450℃ Fuel: Biomass pellet, Rice husk, Biomass mixed with coal fuel etc. Overview: SZL biomass fired boiler is double-drum assembled chain grate boiler, with rated steam capacity of 4 ton-20 ton. Biomass fuels such as rice husk, bagasse, palm kernel shell, distiller grains, straw, coconut ...
-
Manufactured by Aerovit A/Sbased in DENMARK
Online cleaning of the open pass of boilers in waste-to-energy incinerators and biomass combustion plants. The Aerovit SC-Jet cleaning solution is a unique patented rotating nozzle system that sends concentrated water jets more than 5m on to the heating surfaces for cleaning the boiler during full-load operation of the ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The SA ACKE TEMINOX GL burner combines all the benefit s of a modern combustion plant . It is designed for industrial heat and steam generation. It s ef ficient and low-pollut ant combustion complies with the most stringent NOX emissions requirements in place with a low CO and residual oxygen content in the exhaust ...
-
Manufactured by Cochran Ltdbased in UNITED KINGDOM
Cochran’s ST37 Package Steam Boiler is of horizontal three pass wet back design and constructed in accordance with BS EN 12953. This CE marked boiler is designed to meet the latest European environmental legislation and Medium Combustion Plant Directive (MCPD). Suitable for any application, the design features Cochran’s low NOx, low noise burners as standard, and are available with ...
-
Manufactured by Abellon Clean Energy Limitedbased in INDIA
Abellon is working at the forefront of the Swachh Bharat Mission and our vision is to make a significant contribution to the goals laid out under the same. We have evolved an integrated and sustainable model for converting waste into clean energy, with focus on stringent emission control and reduction in PM 2.5 levels, resulting in improved air quality, healthier people, and a cleaner and greener ...
-
Manufactured by NESS Warmetechnik GmbHbased in GERMANY
Creating process heat using biogenic solid fuels. Biomass plants use organic solid fuels such as sawdust, wood chips, timber or landscape management by products to produce hot flue gases. Biomass is an excellent alternative to generating heat using conventional fossil fuel products. Depending on their quality, these solid biomass fuels can create high demands on a plant. The combustion process, ...
-
Manufactured by EES - Environmental Energy Servicesbased in USA
CoalTreat® is EES’ fuel chemistry innovation that has proven to be highly effective in mitigating problems attributed to furnace slagging and heat transfer surface fouling in coal-fired utility and industrial boilers. CoalTreat® is applied to the fuel pre-combustion, customized to each plant’s fuels and specific objectives, and has been successfully deployed on several large ...
-
Manufactured by Lamtec GmbH & Co.KGbased in GERMANY
3 operating modes. 14 frequency ranges. Available as single or double sensor (IR/UV). Degree of protection IP67. Flame ON/OFF self-learning function. Operation via graphic User Interface with status display (optional). SIL 3 according to DIN EN 61508 part 1-7. Available with Class I, Division 2, Group A, B, C, D, Hazardous ...
-
Manufactured by Eric-Sonbased in ITALY
Eric-Son supplies highly efficient turnkey rotary kiln systems for the combustion of special waste, such as such as sludge, animal carcasses, animal powder, solvents, hospital waste, sewage and industrial ...
-
based in ITALY
Operating Principals: The plant basically consists of three vertical chambers filled of high thermal capacity ceramic material (a preheating inlet gas chamber, a heat recovery of purified gas from combustion chamber and a cleaning chamber with fresh air) and a combustion chamber with modulating burner that connect up the 3 chambers. The gas with V.O.C. undergoes a preheating phase crossing from ...
-
Manufactured by Caterpillar Energy Solutions GmbHbased in GERMANY
Gas engine TCG 2032 - Facts and Figures,Output range from 3,000 to 4,300 kwe ‒ MWM's largest series,Mainly used in large IPP projects with up to 100,000 kwe,Outstanding reliability and low maintenance costs, More than 400 power generators with approximately 1,400,000 kwe already installed around the globe ...
-
Manufactured by Leverage Incorporated NVbased in BELGIUM
Fuel gas/liquid skids for combustion plants : it is a modular unit complete with piping, supports, tubing, valve assemblies, filters, instrumentation, wiring on board and junction boxes. Engineering department develops detailed engineering starting from basic information and technical specifications complying with the main international standards and additional requests of ...
-
Manufactured by Linka Energy A/Sbased in DENMARK
A biomass plant based on wood pellets consists of a silo, which are made from either fibreglass for outdoor installations or fibreboard for indoors. The pellets are transported from the base of the silo by an auger to the boiler room, directly to a cell sluice and then into the boiler’s combustion hearth. When the boiler “calls” for fuel the feed procedure is activated, i.e. the ...
-
Manufactured by Saubatech (Pty) Limitedbased in SOUTH AFRICA
MACRO burn Incinerators are your solution to most waste management problems involving solid, liquid or gaseous waste. Simple design and few mechanical parts combine to produce the overall appeal and reliability that MACROburn ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you