Combustion Plants Equipment For Energy Management In Europe
-
Manufactured by Caterpillar Energy Solutions GmbHbased in GERMANY
Gas engine TCG 2032 - Facts and Figures,Output range from 3,000 to 4,300 kwe ‒ MWM's largest series,Mainly used in large IPP projects with up to 100,000 kwe,Outstanding reliability and low maintenance costs, More than 400 power generators with approximately 1,400,000 kwe already installed around the globe ...
-
Manufactured by Leverage Incorporated NVbased in BELGIUM
Fuel gas/liquid skids for combustion plants : it is a modular unit complete with piping, supports, tubing, valve assemblies, filters, instrumentation, wiring on board and junction boxes. Engineering department develops detailed engineering starting from basic information and technical specifications complying with the main international standards and additional requests of ...
-
Manufactured by Cematekbased in ITALY
The advantage of catalytic combustion, when compared to the thermal one, is to guarantee the complete oxidation of volatile organic substances at relatively low temperatures, usually 320-450°C. The low combustion temperature, as well as allowing less energy consumption, ensures a negligible production of NOx, a pollutant thet in combustors operating at higher temperatures is usually present ...
-
based in GERMANY
Lower operating costs than conventional thermal oxidation systems by lowering the oxidation temperature necessary for the combustion reaction by means of noble metal catalysts. Ideal for use with unproblematic exhaust air streams (without any catalyst poisons) and pollutant concentrations between 2-10 g / ...
-
Manufactured by RESETbased in ITALY
SyngaSmart is a renewable energy technology, designed and manufactured by RESET for the production of carbon-negative heat and power through an original biomass gasification system. It consists of a range of integrated and automated plants – from 50 to 200 kWe – available in containerized or forklift-ready configuration. The modular and scalable design allows quick installation both ...
-
Manufactured by Lekea - Dan Trim ApSbased in DENMARK
A hydraulic floor scraper is normally used with woodchips. The woodchips are loaded in a container, and the floor scraper will automatically push the woodchips to the cross screw where strong screws will convey the fuel into the combustion ...
-
based in ITALY
Operating Principals: The plant basically consists of three vertical chambers filled of high thermal capacity ceramic material (a preheating inlet gas chamber, a heat recovery of purified gas from combustion chamber and a cleaning chamber with fresh air) and a combustion chamber with modulating burner that connect up the 3 chambers. The gas with V.O.C. undergoes a preheating phase crossing from ...
-
Manufactured by Inercobased in SPAIN
INERCO offers custom built solutions for the optimisation of combustion ...
-
Manufactured by Linka Energy A/Sbased in DENMARK
A biomass plant based on wood pellets consists of a silo, which are made from either fibreglass for outdoor installations or fibreboard for indoors. The pellets are transported from the base of the silo by an auger to the boiler room, directly to a cell sluice and then into the boiler’s combustion hearth. When the boiler “calls” for fuel the feed procedure is activated, i.e. the ...
-
Manufactured by Cematekbased in ITALY
The regenerative combustion plant is based on the concept of achieving a high thermal energy recovery with the aid of large ceramic masses that – during the heat recovery phase – absorb the heat from combustion gases and – during the regeneration phase – release the accumulated heat for the pre-heating of inlet polluted air. The residual fraction of unrecovered thermal ...
-
Manufactured by WEHRLEbased in GERMANY
In terms of incineration plants, WEHRLE is the specialist regarding fluidised-bed ...
-
Manufactured by Conveco S.r.l.based in ITALY
High efficiency, compact biogas suction and combustion unit mounted on a frame. Compact design and easy installation allow use in emergency situations, for temporary installations or to check the production capacity of the ...
-
Manufactured by Körting Hannover AGbased in GERMANY
Climate protection and plant efficiency; Lack of resources and progressively increasing fuel prices – Climate protection and stricter environmental specifications. These are just a few of the challenges for which future economical solutions in the area of firing technology are required. The efficiency of technical firing plants gives operators competitive advantages and a winning ...
-
Manufactured by Harbauer GmbHbased in GERMANY
Waste gas catalytic processing makes it possible to clean up contaminated areas which formerly used to be left polluted or whose cleanup proved to be too costly. Where the soil is contaminated with vinyl chloride, catalytic combustion plants are the only way to remove the pollutants. As a first step, the raw gas is preheated in a recuperator (air-air heat exchanger) before being heated up to the ...
-
based in FINLAND
We have got WID compliant boilers for the C grade waste wood and SRF combustion: Our WID compliant waste wood gasification boiler manufacturer has over 60-years experience, Works with really low-quality wood, MDF, and chipboard based biomass, and waste wood, SRF combustion is possible together with biomass (80/20% ratio), Waste wood combustion is more than two seconds 850-degree gasification ...
-
based in DENMARK
The DD-Jet Cleaning System for on-line cleaning of the radiation passes of boilers in Waste to Energy incinerators and Biomass combustion plants. The system is now installed at 23 WtE plants in Europe.The DD-Jet apply 4-6 concentrated water jet beams from the rotating advanced DD-Jet turbine nozzle complex. The DD-Jet nozzle system provides the necessary water amount in concentrated water beams ...
-
Manufactured by Cochran Ltdbased in UNITED KINGDOM
Styled on the world renowned and popular Wee Chieftain boiler, the COCHRAN ST28 Low Nox PACKAGE STEAM BOILER is of horizontal three pass wet back design and constructed in accordance with BS EN 12953 providing unrivalled efficiency and reliability. The boiler is designed to meet the latest European environmental legislation, the Medium Combustion Plant Directive (MCPD) when fitted with Cochran ...
-
Manufactured by SIMEC Atlantis Energybased in UNITED KINGDOM
Consultation before Applying for Planning Permission: Town and Country Planning (Development Management Procedure) (Wales) Order 2012 as amended by The Planning Applications (Temporary Modifications and Disapplication) (Wales) (Coronavirus) Order 2020. The Uskmouth Power Station Conversion Project (referred to as the Uskmouth Conversion Project) proposes to convert the existing coal fired power ...
-
Manufactured by ITI Engineeringbased in ITALY
Combustion plant for wood waste. It consists mainly of a hot gas generator coupled with a thermal oil boiler, for the heating of the oil required for indirect heating dryers and plywood production presses, and the indirect saturated steam generators for a belt dryer for the production of particleboard panel, and superheated for the operation of a 200 KWe cogeneration ...
-
Manufactured by ITI Engineeringbased in ITALY
Combustion plant for wood waste. The plant is basically made up of a hot gas generator combined with a direct drum dryer, for MDF panel production, and a thermal oil boiler for heating the oil needed for the press ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you