Combustion Plants Equipment For Energy Management
-
Manufactured by WEHRLEbased in GERMANY
In terms of incineration plants, WEHRLE is the specialist regarding fluidised-bed ...
-
Manufactured by Macrotec (Pty) Ltdbased in SOUTH AFRICA
Macrotec’s Standalone Incinerators offer an efficient way to dispose of a wide range of wastes while reducing the environmental impact. Our incinerators have been designed to reduce every possible threat to the environment, while providing a reliable and cost effective solution. We make use of advanced designs in our combustion plant, which regulates the combustion rate, temperature in the ...
-
Manufactured by Conveco S.r.l.based in ITALY
High efficiency, compact biogas suction and combustion unit mounted on a frame. Compact design and easy installation allow use in emergency situations, for temporary installations or to check the production capacity of the ...
-
Manufactured by Körting Hannover AGbased in GERMANY
Climate protection and plant efficiency; Lack of resources and progressively increasing fuel prices – Climate protection and stricter environmental specifications. These are just a few of the challenges for which future economical solutions in the area of firing technology are required. The efficiency of technical firing plants gives operators competitive advantages and a winning ...
-
Manufactured by Harbauer GmbHbased in GERMANY
Waste gas catalytic processing makes it possible to clean up contaminated areas which formerly used to be left polluted or whose cleanup proved to be too costly. Where the soil is contaminated with vinyl chloride, catalytic combustion plants are the only way to remove the pollutants. As a first step, the raw gas is preheated in a recuperator (air-air heat exchanger) before being heated up to the ...
-
based in FINLAND
We have got WID compliant boilers for the C grade waste wood and SRF combustion: Our WID compliant waste wood gasification boiler manufacturer has over 60-years experience, Works with really low-quality wood, MDF, and chipboard based biomass, and waste wood, SRF combustion is possible together with biomass (80/20% ratio), Waste wood combustion is more than two seconds 850-degree gasification ...
-
based in DENMARK
The DD-Jet Cleaning System for on-line cleaning of the radiation passes of boilers in Waste to Energy incinerators and Biomass combustion plants. The system is now installed at 23 WtE plants in Europe.The DD-Jet apply 4-6 concentrated water jet beams from the rotating advanced DD-Jet turbine nozzle complex. The DD-Jet nozzle system provides the necessary water amount in concentrated water beams ...
-
Manufactured by Cochran Ltdbased in UNITED KINGDOM
Styled on the world renowned and popular Wee Chieftain boiler, the COCHRAN ST28 Low Nox PACKAGE STEAM BOILER is of horizontal three pass wet back design and constructed in accordance with BS EN 12953 providing unrivalled efficiency and reliability. The boiler is designed to meet the latest European environmental legislation, the Medium Combustion Plant Directive (MCPD) when fitted with Cochran ...
-
Manufactured by Zhengzhou Zhengdian Generator Co.,Ltdbased in CHINA
Zhengdian Generator equipped with international famous Korea Doosan diesel engine; High emission standard-EU II-IIIA; Power range:63KVA-750KVA, which can afford most home / factory and power station need. Doosan diesel engine Original: Made in Korea.As an integrated diesel engine manufacturer,Doosan Engineis specialized in diesel engines for large vessels, as well as the construction of ...
-
Manufactured by SIMEC Atlantis Energybased in UNITED KINGDOM
Consultation before Applying for Planning Permission: Town and Country Planning (Development Management Procedure) (Wales) Order 2012 as amended by The Planning Applications (Temporary Modifications and Disapplication) (Wales) (Coronavirus) Order 2020. The Uskmouth Power Station Conversion Project (referred to as the Uskmouth Conversion Project) proposes to convert the existing coal fired power ...
-
Manufactured by Applied CleanTech (ACT)based in ISRAEL
The SRS includes a Bio-Solids Processing Module, which performs a series of processing steps on the extracted solids to produce RecylloseTM brand alternative commodity sources and other commodity ...
-
Manufactured by ITI Engineeringbased in ITALY
Combustion plant for wood waste. It consists mainly of a hot gas generator coupled with a thermal oil boiler, for the heating of the oil required for indirect heating dryers and plywood production presses, and the indirect saturated steam generators for a belt dryer for the production of particleboard panel, and superheated for the operation of a 200 KWe cogeneration ...
-
Manufactured by ITI Engineeringbased in ITALY
Combustion plant for wood waste. The plant is basically made up of a hot gas generator combined with a direct drum dryer, for MDF panel production, and a thermal oil boiler for heating the oil needed for the press ...
-
Manufactured by Sumitomo SHI FWbased in FINLAND
Flexible solutions tailored to customer needs; Getting clean energy from combustion plants involves smart emissions control. Using fuel like coal, oil products, natural gas, municipal and industrial waste unavoidably produces harmful pollutants like nitrogen oxides (NOx). These emissions can be reduced by turning NOx into nitrogen (N2) and water (H2O). There are two main options that involve ...
-
Manufactured by Linka Energy A/Sbased in DENMARK
Linka’s steam system is largely identical with our hot water system. The difference is the design of the boiler, which is here made to produce steam. A combustion plant based on wood pellets consists of a silo, which are made from either fibreglass for outdoor installations or fibreboard for indoors. The pellets are transported from the base of the silo by an auger to the boiler room, ...
-
Manufactured by ILNET TRANSIT ASbased in ESTONIA
Sunflower husk pellets are made of the husks of sunflower seeds left over from the process of kernel extraction during the production of sunflower oil. The granulation process (creation of pellets) occurs under high pressure, without the addition of any ...
-
Manufactured by EES - Environmental Energy Servicesbased in USA
CoalTreat® is EES’ fuel chemistry innovation that has proven to be highly effective in mitigating problems attributed to furnace slagging and heat transfer surface fouling in coal-fired utility and industrial boilers. CoalTreat® is applied to the fuel pre-combustion, customized to each plant’s fuels and specific objectives, and has been successfully deployed on several large ...
-
Manufactured by IBS Industrie-Brenner-Systeme GmbHbased in GERMANY
Modular designed system for direct heating of process air for dryer and post combustion plants. GRIDFIRE-moduls are available in straight, T- and X-shape for capacities starting at 160 kW. The combination of the moduls makes burner capacities up to 25 MW and more ...
-
Manufactured by Cochran Ltdbased in UNITED KINGDOM
Cochran’s ST37 Package Steam Boiler is of horizontal three pass wet back design and constructed in accordance with BS EN 12953. This CE marked boiler is designed to meet the latest European environmental legislation and Medium Combustion Plant Directive (MCPD). Suitable for any application, the design features Cochran’s low NOx, low noise burners as standard, and are available with ...
-
Manufactured by Lekea - Dan Trim ApSbased in DENMARK
Lekea-Dan Trim – Danish-manufactured combusion plants with outputs from 100 to 800 kWs, designed for the industry, agriculture and institutions requiring reliable and affordable heating ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you