Combustion Technology Applications available in Indonesia
-
Premium
Asphalt production - monitoring solutions for process optimization & energy saving
Asphalt plants deal with a harsh environment and are subject to great mechanical and thermal constraints. Process monitoring and optimization is becoming an increasingly important issue for plants, especially in terms of energy savings. ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Gas monitoring for power generation applications
Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’ ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Combustion Technology for Hot Gas Production
Hot process gas is required for the start-up or running of many production plants, in the refinery as well as in petrochemical plants and in the minerals industry. CS can offer hot gas generator systems for almost all applications. Many years of experience in the firing sector, as well as tailor-made solutions, which are tested for the most complex applications by using CFD, make it possible to supply optimum complete systems for the customer. No matter whether the process gas has to be provided at 100°C, ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Combustion Technology for Sulphur & Sulphur Acid
For the majority of the licensors of sulphuric acid processes represented on the market, CS builds burners and combustion chamber systems for the combustion of liquid sulphur, with or without a downstream waste heat ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Combustion Technology for Alternative Combustibles
Hydrogen is the fuel gas with the highest burning rate and flame temperature and was already a fuel used for energy by industry before the power to fuel trend. Often as a by-product from chlorine gas production or conventional H2 steam reformers, where it is "contaminated" with other hydrocarbons, it is used to heat convection reformers. CS has been supplying burner systems for various concentrations of H2 for all types of hydrogen production plants for over 10 years. Hydrogen has also always been an important ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
LowNOx Systems for Nitrogenous Fuels
During the combustion of organic fuels with a high nitrogen content, NOx concentrations of up to several thousand mg or ppm are produced during a normal combustion process. The most efficient primary measure for NOx reduction is the staged combustion, where the combustion air is applied in two or more stages, depending on the ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Gas analysis solutions for combustion industry
Combustion is a chemical process that involves the rapid reaction of a fuel substance with oxygen and heat. During this reaction new chemical substances, such as exhaust fumes, heat and light are created. There are many types of combustion including; complete, incomplete, smouldering, rapid and turbulent. Each process can differ due to the heat source and amounts of fuel or oxygen ...
By Cambridge Sensotec Limited based in St. Ives, UNITED KINGDOM.
-
Combustion Technology for Liquid Residue Incineration
The entire chemical, petrochemical and pharmaceutical industry produces huge amounts of liquid residues that can be thermally recycled. In response to the principle of zero waste emission, these are increasingly being converted into thermal energy directly where they are produced. This is usually done in adiabatic combustion chamber systems with subsequent waste heat utilisation. Industrial parks also have special hazardous waste incineration plants, operated by globally active waste management companies, in which ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Oilfield Power Systems for Oil & Gas Industry
Flared gases and NGLs can be re-purposed as fuel for flex-fuel, low-emissions LPP Combustion Power Systems, lowering production costs, reducing logistical burdens, and addressing Gas Capture Plan and other compliance issues with flaring and emissions. The Lean, Pre-mixed, Pre-vaporized (LPP) equipment enables clean combustion of liquid fuels in gas turbines and industrial boilers and burners. In addition to flare-gas NGLs, the LPP Combustion Oilfield Power System also operates on a variety of traditional liquid ...
By LPP Combustion, LLC based in Columbia, MARYLAND (USA).
-
Energy production from biomass
Zuccato Energia ORC systems have found several applications in combination with a wide range of overheated water generation systems based on biomass combustion. These systems usually operate one or more ORC modules using overheated water coming from a fixed- or mobile-grate boiler burning automatically-fed wooden biomass chips derived from sawmills, woodworking industry or the pruning of state or municipal ...
By Zuccato Energia Srl based in Verona, ITALY.
-
Heat Pumps for Commercial Building Industry
The U.S. Department of Energy estimates that commercial buildings account for 826 million metric tons of CO2 emissions annually. Additionally, the average energy consumption of a commercial building in the U.S. is 22.5 kilowatt-hours per square foot. Energy is wasted in many ways—from heating, cooling, and lighting to ventilation, hot water heating, and more. The inefficiencies with traditional boilers and chillers have created a dire need for a more robust solution, one that addresses high energy ...
By Dalrada Climate Technology (DCT), a subsidiary of Dalrada (DFCO) based in Escondido, CALIFORNIA (USA).
-
Heat Pumps for Healthcare Industry
The U.S. Department of Energy estimates that American healthcare is responsible for contributing over 655 million metric tons of carbon emissions annually. On average, 30% of a healthcare building’s energy is wasted. DCT heat pumps can help reduce energy consumption and energy waste while maximizing cost ...
By Dalrada Climate Technology (DCT), a subsidiary of Dalrada (DFCO) based in Escondido, CALIFORNIA (USA).
-
Heat Pumps for Food Processing Industry
Rising Global Concern; With countries striving to achieve their NetZero pledges through the development and implementation of global sustainability standards, many industries are discovering the best ways to reduce carbon emissions and cut energy costs. The Food Processing industry has recognized the importance of utilizing renewable energy sources to comply with the upcoming standards and guidelines. This growing recognition reinforces the fact that businesses transitioning to sustainable practices is not only ...
By Dalrada Climate Technology (DCT), a subsidiary of Dalrada (DFCO) based in Escondido, CALIFORNIA (USA).
-
Torbed process reactor technologies solutions for biomass processing sector
The advantages of the TORBED technologies for production of energy from biomass are: Faster and more precise temperature control - important with high alkali feed stocks to prevent accretions. Handling of irregularly shaped solid feed stocks – this minimizes feed stock shredding, chipping or milling. Low pressure drop allowing process gas recirculation for maximum turndown - 50:1 achievable. Rapid start-up and program change. Smaller size with easy installation. Simplicity in operation and ease of automation ...
By Torftech Group based in Thatcham, UNITED KINGDOM.
-
Cocoa shells making steam for bean processing
Cocoa processing plants are often located in remote areas with little or no access to fossil fuels. The cocoa shells represent up to 10 % of the processing capacity of a typical plant, and often have no market value. VYNCKE offers combustion systems to convert the cocoa shells into a reliable supply of steam for the sterilization, roasting and grinding process. Our systems effectively address the challenges of cocoa shells as a boiler fuel, and even allow co-generation (combined heat and power ...
By VYNCKE based in Harelbeke, BELGIUM.
-
Thermal processes and sensor-based analysis solutions for cement production sector
Fuel-Mix in cement production: Reduce costs and increase quality – based on intelligent process control. As fossil fuels become increasingly scarce and energy costs continue to rise, alternative fuels such as heavy oil, solvents, solid recovered fuels, and meat and bone meal are becoming more and more common as a substitute for oil and coal dust. This applies in particular to cement production with its high energy consumption. With the help of inspect pro control C the combustion behavior of different fuel ...
By ci-Tec GmbH based in Karlsruhe, GERMANY.
-
Flares for Safe Disposal of Waste & Toxic Gases
Our Flares are versatile in design & suitable for total destruction of waste gas/vapours. The waste gases/Vapours from petrochemical, WWTP, chemical plants have very high potential for environmental hazards. If allowed to released unburned into atmosphere. SIES offers flares and combustion systems for safe disposal of gases with high efficiency and reliability. System Designed to meet the API 521/537 norms High efficiency Burners with up to 99% thermal destruction Flares operable on fully automated, SCADA ...
By Synchronous International Engineering Solutions Co. Ltd. based in Bangkok, THAILAND.
-
Micro SNCR System for Small Biomass Boiler Industry
FlowVision’s Micro SNCR system has been specifically developed for the small biomass boiler industry. As more stringent emission regulations are forced upon the small scale boiler sector, post combustion NOx reduction technology is needed to achieve the limits. The ideal solution is to install an SNCR system, however, conventional systems can be large and complicated. The FlowVision Micro SNCR system provides a compact cost effective solution to your NOx reduction needs. ...
By FlowVision A/S based in Odense N, DENMARK.
-
Monitoring Solutions for Biomass
Biomass Power Plants generates power from biomass fuels such as wood pellets, bagasse and hog fuel. This fuels are susceptible to spontaneous combustion since it can occur at any stage of storage, production or transport. Early detection of fire or combustion is important for safety ...
By VisionTIR based in Malaga, SPAIN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you