combustion system Articles
-
New level of engine simulation – Siemens portfolio expansion supports modeling of combustion engines
Siemens Digital Industries Software is expanding its Simcenter Star-CCM+ simulation software with a new version that can be used for combustion engine modeling. With the new version of the software for the simulation of products and designs, engineers can use new physical models to optimize the realism and fidelity of their simulations. In addition, the new version now also offers the hotly ...
By Siemens AG
-
Plasma resource recovery technology –converting waste to energy and valuable products
Abstract Plasma Resource Recovery (PRR) is a revolutionary technology that can treat virtually any type of waste by combining gasification with vitrification. Vitrification produces inert slag that can be used as a construction material. Gasification produces a fuel gas containing carbon monoxide (CO) and hydrogen (H2), used for cogeneration of electricity and steam. The plasma fired eductor ...
-
A STIEFEL project KVA Linthgebiet Niederurnen case study
The waste incineration plant KVA Linthgebiet is situated in Switzerland. The plant disposes of a total of 120’000 tons of waste each year from 240‘000 inhabitants in the surrounding area. Due to the thermal recovery, it produces annually 84 GWhour of electrical energy and therefore saves 250’000 litres of fuel oil by providing energy to a district heating system. Background and ...
-
Power plant combined heat and power - Sahacogen Public Company Limited - Case Study
OWNER Sahacogen (Chonburi) Public Company Limited LOCATION Laem Chabang, Chonburi, Thailand PRODUCT Titan 250 (23 MWE) Gas Turbine The Sahacogen power plant is located about 125 km from the capital of Thailand, Bangkok, in the Laem Chabang region. This is a cogeneration combined cycle plant that uses natural gas fuel and has the capacity to produce 174 MW of electricity and 81 tons of steam ...
-
Belledune - Case Study
In 2021, Interfor in Belledune, NB purchased a 1000 hp wood fired energy system from Nexus Combustion inc. The energy system is used to supply steam to their 6 lumber dry kilns, hot pond, and ...
-
Bathurst - Case Study
In 2022, Interfor in Bathurst, NB purchased a 40 MMBtu wood fired thermal fluid energy system from Nexus Combustion inc. The energy system is used to supply 500 F thermal fluid to heat their 6 existing lumber dry ...
-
Combined Heat and Power University - York University - Case Study
OWNER York University LOCATION Toronto, Ontario, Canada PRODUCT Taurus™ 60 (5 MW) Gas Turbine CUSTOMER VALUE Energy Cost Reduction The Taurus 60 gas turbine generator set and a supplementary-fired exhaust heat recovery steam generator (HRSG) cogenerate approximately 5 MW of electricity and from 11113 kg/hr (24,500 Ib/hr) (unfired) to 29 484 kg/hr (65.000 Ib/hr) of steam (with ...
-
Energy conservation studies on residential heating systems: an application for Izmir, Turkey
Energy conservation through improvement of the efficiencies of end use devices such as boilers and stoves used for space heating is one of the most effective ways to provide immediate relief for the energy problem in the residential sector of Turkey. For this reason, during the 1995-96 winter period, the campaign "Saving the Environment Begins at Home" was launched by the branch office of the ...
-
Optimizing VOC Combustion - Case Study
Volatile Organic Compounds (VOCs) are pre-cursors to Ozone pollution and subject to EPA regulations. Thermal and catalytic oxidizers are routinely used to destroy VOC emissions from a variety of industrial sources. NOx and CO are common byproducts created in the burning of natural gas. All of these pollutants can be effectively minimized, but the challenge is engineering a solution that ...
-
Project Thermal Oil Boiler Plant Neogroup - Case Study
20 MW Klaipėda, Lithuania 2015 November 30 Main equipment Fuel supply system – Overground open fuel warehouse Fuel combustion system – Saxlund grate furnace with the thermal oil boiler Additional heat generation equipment – thermal oil economizer Flue gas cleaning system – electrostatic precipitator (ESP) Purpose of the boiler plant – heat ...
-
Ergon, Inc. - 4.72 MW CHP System - Case Study
Quick Facts LOCATION: Vicksburg, Mississippi MARKET SECTOR: Crude Oil Processing FUEL: Natural Gas MAX CAPACITY: 4.72 MW IN OPERATION SINCE: 1994 EQUIPMENT: Solar 60 Gas Turbine Ideal Electric Co. Generator VolcanInternational Waste Heat Boiler Economizer and Exhaust System Davis Combustion Systems Duct Burner Effox Diverter Valve USE OF WASTE HEAT: Create Steam for Refinery YEARLY ...
-
Analytical and experimental study on bending vibration of internal combustion engines shafting system based on wave equations
This paper proposes a new analytical approach to study the bending vibration of N step shafting system. Changes of the shaft step properties under rotary condition are governed by two–dimensional wave equations. The source of the bending vibration is first analysed. Then strain and stress equations of the spinning shaft are established. After Hamilton principle is applied, a two–dimensional wave ...
-
Combined Heat and Power Educational Services- San Diego State University - Case Study
OWNER San Diego State University LOCATION San Diego, California, USA PRODUCT Two Taurus 60 (5.2 MWe) Gas Turbines CUSTOMER VALUE Sustainable, Low Cost Energy Production San Diego State University (SDSU) was seeking to manage its energy costs in a deregulated electricity market, while at the same time ensuring ultra-reliable, high-quality power to keep pace with its continuing growth. SDSU ...
-
More Power & Flexibility Lead to Profits Case Study
In 2014, Powerphase installed a Turbophase system consisting of two Turbophase modules, at a cogeneration plant in the U.S. The Morris Cogen plant is a 177 MW combined-cycle gas facility located within the Equistar Chemicals petrochemical plant in Morris, IL. The Morris plant has a single pressure steam turbine (ST) (625 psig/750°F) rated at 57 MW, and three GE MS6001B, PG6561 gas turbines ...
By Powerphase
-
Oil Filter Elimination
The need to state strictly and accurately the procedures for the collection and elimination of car oil filters is a topical subject, due to the injuries to health and environment that would be caused by an inappropriate storage and elimination. According to the Italian law, the expression “exhaust oil” identifies any industrial oil or lubricant with a mineral or synthetic basis which is no more ...
-
Royal Darwin Hospital Contract Report Case Study
As part of a larger infrastructure upgrade project at Royal Darwin Hospital, CCM Energy Solutions were elected by the primary contractor (O'Donnell Griffin) to supply two new Limpsfield high-efficiency burners for the two main John Thompson boilers which provide steam to the hospital. In addition, new Autoflame Mk7 combustion control systems were incorporated into the design, along with in-situ ...
By Limpsfield
-
A STIEFEL project UTO Uvrier case study
The waste incineration plant UTO Uvrier is situated in the south western part of Switzerland. The Association which controls the plant was established in 1969 and treats waste from 44 municipalities with a combined population of 170,000 inhabitants. The principal task of UTO Uvrier is the thermal heat recovery from urban and industrial waste. Apart from this, UTO also treats other types of waste ...
-
Mawera Inside Story – Biomass - Case Study
With more than 30 years’ experience in the UK market, Mawera UK has supplied and installed wood burning boilers to numerous companies, turning wood-waste into heat for factory, office and process heating and helping companies recover the cost of their boilers through compliance with the RHI. To support progress and innovation, Mawera maintains its own levels of technology and combustion ...
By Mawera
-
Case study - Be modern invest in biomass boilers
As one of the UK’s largest fireplace manufacturers and suppliers of bathroom furniture, Be Modern is an established Group of Companies based in the North East that employs over 350 skilled workers. Established in 1964 the group supplies products across the UK to a wide and diverse customer base as well as exporting products across Europe. With over 500,000 square foot of manufacturing and ...
By Mawera
-
Evonik Industries - 5 MW Natural Gas CHP System - Case Study
Quick Facts LOCATION: Garyville, LA MARKET SECTOR: Chemical FUEL: Natural Gas GENERATING CAPACITY: 5 MW THERMAL OUTPUT: 80,000 lbs/hr Steam IN OPERATION SINCE: 2012 EQUIPMENT:(1) 5 MW Solar Turbines gas turbine (1) Cleaver Brooks D-tube HRSG USE OF ELECTRIC ENERGY: On-site & export to utility USE OF THERMAL ENERGY: Process steam INSTALLED COSTS: $10 million EMISSIONS ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you