Combustion Technology Manufacturers, Suppliers & Companies (Energy Management) In Canada
-
Solar Turbines started as an aircraft company in 1927. The company grew through several wars and the Great Depression. Solar’s growth led the company to develop a wide range of innovative products. Solar Turbines is one of the world's leading ...
Solar - Model SMT60 & SMT130 - Solar Mobile Turbomachinery (SMT)
Solar Mobile Turbomachinery (SMT) is the best solution for oil field power, remote power and trailer power in the industry, and in emergencies such as natural disasters where quick power is essential. The single trailer design is a complete mobile ...
CONTACT SUPPLIER -
ManufacturerOffice in Markham, ONTARIO (CANADA)
The ConDex System utilized specialized metallurgy, and proprietary design engineering to significantly enhance the heat transfer process in a wide variety of applications. TheConDex System is also dramatically smaller and far more efficient than ...
ConDex - Heat Recovery System
The ConDex Energy Recovery System, the breakthrough technology from Combustion and Energy Systems that perfects the recovery of heat from exhaust gases. Flue gases from boilers, turbines, ovens, dryers, etc. - single or multiple sources of waste ...
CONTACT SUPPLIER -
Manufacturerbased in Vancouver, BRITISH COLUMBIA (CANADA)
Inproheat Industries Ltd. is a premier industrial energy solutions provider to industry. With over 60 years of experience, we provide a diverse range of top-tier refractory and foundry products to the foundry and steel-making sectors in western ...
SubCom - Submerged Combustion Process Heating Technology
The use of fossil fuels has contributed to industrialization enormously, but this has resulted in an increase of CO2 in the Earth’s atmosphere. The challenge to many industries is the requirement to heat large volumes of water or aqueous ...
CONTACT SUPPLIER -
Manufacturerbased in Ottawa, ONTARIO (CANADA)
AET is an R&D / manufacturing company whose primary business activities include research, development, manufacturing and testing of diesel engines, engine components and instrumentation for transportation, power generation and related applications, ...
-
ManufacturerDistributor in Nisku, ALBERTA (CANADA)
Based out of Hutchinson Kansas, is the world’s leading manufacturer of Scotch Marine Firetube and high efficiency Condensing boilers as well as associated boiler room equipment for process steam, hot water, and waste recovery. Superior Boiler Works ...
-
Manufacturerbased in London, ONTARIO (CANADA)
Founded in 1947 and operating as an independent Canadian company since 1987 KMW has unrivaled experience and history in the biomass boiler industry. With 70 years of experience engineering, manufacturing and supplying biomass combustion systems and ...
Research & Development Services
KMW’s response to the need for greater biomass fuel flexibility is our continuing efforts in research and development to enhance our combustion technology. These efforts have resulted in the installation of a specially designed combustion ...
CONTACT SUPPLIER -
Manufacturerbased in Hubley, NOVA SCOTIA (CANADA)
Trecan Combustion is a Canadian company that has been designing and manufacturing Snowmelters for over 35 years and to date the company has delivered over 500 machines throughout the world. The name Trecan was originally an acronym for Thermal ...
-
Manufacturerbased in St. Adolphe, MANITOBA (CANADA)
Our changing climate is a threat to the economy and communities in which we live. We at Triple Green Energy take the matter seriously and are proud to be a leading North American clean energy solution provider. Triple Green Energy is proud to ...
Triple Green Energy - Flame Stoker
Triple Green Flame Stoker is a world class combustion system engineered and manufactured in Canada by SCW Manufacturing. Our system has a unique ability to combust a variety of solid fuels to generate hot water or steam, while maintaining low ...
CONTACT SUPPLIER -
Manufacturerbased in Aurora, ONTARIO (CANADA)
Innovative Hydrogen Solutions Inc. (I.H.S.) is the developer behind The i-phi, a Hydrogen Generating Module for Heavy Goods Vehicles (HGV) that runs on diesel fuel. The product produces a mixture of hydrogen and oxygen gases, on demand, through a ...
-
Distributorbased in Kamloops, BRITISH COLUMBIA (CANADA)
Ventek Energy Systems Inc is a fully integrated bioenergy equipment and service provider. Our business model is to offer innovative, turnkey solutions from feasibility, fuel logistics, system design, construction, through to operation and ...
-
ManufacturerDistributor in Red Deer, ALBERTA (CANADA)
Vapor Power Internationalwas founded in 1903 and is based in Franklin Park, Illinois. It has offices worldwide. Vapor Power International manufactures Boilers, Packaged Steam Generators, Thermal Fluid Heaters, and Electric Boilers. Applications ...
-
Manufacturerbased in Calgary, ALBERTA (CANADA)
Our proprietary technology is an alternative, efficient, green, and environmentally friendly technology for converting carbon-based wastes into a number of value-added non-combustion products such as humic acids, lighter hydrocarbons, carbon ...
-
Manufacturerbased in MD of Rocky View, ALBERTA (CANADA)
TORNADO Combustion Technologies is a recognized leader in the design and manufacturing of combustion systems for energy producers and engineering firms worldwide. Tornado works closely with our customers to innovate new products that provide simple ...
Tornado - Model FKO - Fluid Knockouts Flare System
An FKO (fluid knockout) is a low-pressure separator used on a vent line to remove liquids from a waste gas stream prior to being flared or incinerated. This can prevent water from freezing in the flare stack riser or liquid carryover from being ...
CONTACT SUPPLIER -
ManufacturerOffice in Edmonton, ALBERTA (CANADA)
LAMBION Energy Solutions GmbH has been designing and building bioenergy plants for more than 90 years. With over 3,400 biomass combustion plants to our credit around the world, Since 100 years we have dedicated ourselves to energy generation from ...
-
ManufacturerDistributor in Barrie, ONTARIO (CANADA)
Clean Combustion develops dynamic industrial combustion technologies and systems to improve efficiency and lower emissions. The evolution towards our Dynamic Performance concept started over two decades ago when my brother Mr. Bertil Myrén worked as ...
Model SKU 1002 - Start-up Burner and Station
Clean Combustion Start-up Burner systems have been designed for energy intense industrial applications. High Turn Down fuel injectors are integrated in Start-up Burner stations. Turn Down Ratio of 10:1 is achivable when using the complete BMS and ...
CONTACT SUPPLIER -
ManufacturerOffice in Red Deer, ALBERTA (CANADA)
AEREON, Headquartered in Austin, Texas, AEREON is a global leader in gas and vapor handling, combustion and recovery technologies and services. AEREON was formed in 2012 when Flare Industries, LLC acquired Jordan Technologies. Under the two brands, ...
AEREON - Marine/Rail/Truck Loading Vapor Combustors
AEREON is an expert in the design, manufacture and service of all types of vapor combustion units (VCU's). An AEREON VCU is commonly used for marine, rail and truck loading and can be specially designed for other waste streams. AEREON's VCUs are ...
CONTACT SUPPLIER -
ManufacturerOffice in , CANADA
Combustion Technologies USA is a private company located in Sandy, Utah, specializing in products and services, focused on equipment performance and maintenance solutions, coupled with measurable reductions in operating costs. Combustion ...
CleanBoost Platinum - Diesel for Special Marine Applications
CleanBoost Platinum fuel additive is our latest version of our CleanBoost formulation which is specifically developed to work in large diesel engines utilizing #2 ULSD in marine and mining applications. It is specifically recommended for treating ...
CONTACT SUPPLIER -
Manufacturerbased in Whitby, ONTARIO (CANADA)
GESi is a privately held Canadian company, located in Whitby, Ontario. Our mandate is to design, develop and manufacture the finest emissions control technology in the world. Our Dry Selective Catalyst (DSC) technology stands out in the marketplace ...
-
Software vendorDistributor in Mississauga, ONTARIO (CANADA)
CMC Solutions is a leading supplier of PEMS or predictive emission monitoring systems, and the most advanced emissions monitoring solutions available on the market today. We provide you with customer preferred, best-in-class predictive emissions ...
-
Manufacturerbased in Brantford, ONTARIO (CANADA)
Incorporated in 1976, SPL Control Inc. is an industry pioneer in the Industrial Gas Turbine Acoustic industry. With a primary focus on Gas Turbine Combustion Air Intake Systems, Ventilation Systems, Acoustical Enclosures, Exhaust Systems and Filter ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you