Combustion Applications
-
Waste handling solutions for the refuse derived fuel (RDF) industry
Waste to energy: The use of refuse derived fuel (RDF) is part and parcel of today's regulated waste disposal. Using a selective treatment process, fractions high in calorific value are separated off from commercial and industrial waste, creating a marketable product. Depending on calorific value, composition and particle size, this fuel is used in industrial fluidised bed firings, in cement kilns and in RDF power ...
By Komptech GmbH based in Frohnleiten, AUSTRIA.
-
Filtration systems & solutions for energy sector
Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled ...
By Porvair - Filtration Group based in Fareham, UNITED KINGDOM.
-
Heat recovery from engines
Diesel engines typically convert no more than 33% of the energy contained in their fuel> in mechanical energy; about 25% of the energy input ends up in the cooling circuit and 33% in the exhaust gases (source: SAE ). So, it is evident how any intervention having the purpose of recovering at least a part of that large waste of energy is ...
By Zuccato Energia Srl based in Verona, ITALY.
-
Gas analysis solutions for combustion industry
Combustion is a chemical process that involves the rapid reaction of a fuel substance with oxygen and heat. During this reaction new chemical substances, such as exhaust fumes, heat and light are created. There are many types of combustion including; complete, incomplete, smouldering, rapid and turbulent. Each process can differ due to the heat source and amounts of fuel or oxygen ...
By Cambridge Sensotec Limited based in St. Ives, UNITED KINGDOM.
-
Temperature measurement and control devices for power industry
Serving the Power Industry for over 25 years. Rush deliveries for outages & emergencies. Wide variety of products designed specifically for Power Plant Applications including: Superheater & Waterwall Tubes, Drum Surface, Flue Gases, Steam/Water Lines, Motors, Generators, Boiler Feed Pumps, Air Pre-Heater, Coal Pulverizer and Turbine ...
By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).
-
Rank Equipment for Engines
Reciprocating internal combustion engines are a widespread and well-known technology. They are available for a multitude of applications, with powers ranging from a few kilowatts to over 5 MW. Rank equipment can increase the power generation and, therefore, the efficiency of these ...
By Expander Tech S.L. based in La Vall d´Uixó, SPAIN.
-
Organic Rankine Cycle (ORC) Systems for High Temperature CHP
ST&P, Turboden Steam & Power ORC system, is a new technical solution for Combined Heat & Power (CHP) generation, with a very high overall energy efficiency, directly employed in manufacturing and industrial processes. It allows the production of electricity and a valuable high temperature heat carrier, such as steam, directly exploitable in manufacturing ...
By Turboden S.p.A based in Brescia, ITALY.
-
Compressors for Gas Turbine Power Plants
In gas-turbine power plants, flammable gases are used to drive turbines. These turbines are in turn connected to generators which actually produce the electricity. In gas and steam combination power plants, the heat generated by the gas turbines is also used to produce steam for the steam turbines. Small gas power plants (socalled combined heat and power plants) use an internal combustion engine instead of a turbine to drive the generator. These combined heat and power plants are frequently used in order to cover ...
By J.P. Sauer & Sohn Maschinenbau GmbH based in Kiel, GERMANY.
-
Conventional Power Generation Systems for Unlocking Resource Value
CES technology allows our customers to expand their perspective on economically attractive natural resources, whether it being stranded, marginal, contaminated, or traditionally uneconomic resources, or simply overcoming siting or permitting issues by providing self-sustained access to water, power, CO2, and ...
By Clean Energy Systems, Inc. (CES) based in Rancho Cordova, CALIFORNIA (USA).
-
Cocoa shells making steam for bean processing
Cocoa processing plants are often located in remote areas with little or no access to fossil fuels. The cocoa shells represent up to 10 % of the processing capacity of a typical plant, and often have no market value. VYNCKE offers combustion systems to convert the cocoa shells into a reliable supply of steam for the sterilization, roasting and grinding process. Our systems effectively address the challenges of cocoa shells as a boiler fuel, and even allow co-generation (combined heat and power ...
By VYNCKE based in Harelbeke, BELGIUM.
-
Butterfly Valve for District Heating
In thermal power plants, the combustion of fossil fuels or biomass water is converted into hot steam at up to ...
By Quadax Valves, Inc. - a Daughter Company of Müller Coax Ag based in Bristol, PENNSYLVANIA (USA).
-
Combustion analyzers for heat treating industry
Enerac Portable Combustion Analyzers for Heat Treating Applications. Heat treating is a group of industrial and metalworking processes used to alter the physical, and sometimes chemical, properties of a material. The most common application is metallurgical. Heat treatments are also used in the manufacture of many other materials, such as glass. Heat treatment involves the use of heating or chilling, normally to extreme temperatures, to achieve a desired result such as hardening or softening of a material. Heat ...
By Enerac, LLC based in Holbrook, NEW YORK (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you