Combustion Applications in Canada
-
Premium
Industrial Boilers Application Note
Industrial boilers are used to produce steam, whicl can be used to turn electrical turbines to generate power or provide heat in an industrial process. In all cases, it is important to monitor and diagnose combustion conditions within the boiler to improve its operation, and safety. Key measurements can support the optimisation of the combustion process and minimise emissions. Monitoring the boiler can also provide important information on the refractory or waterwall condition. AMETEK Land's products support ...
By AMETEK Land Instruments International Ltd Distributor in , ALBERTA (CANADA).
-
Carbon Monoxide and Carbon Dioxide Sensing for Gasification
Application: Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide and Hydrogen, which amount for around 85% of Syngas, and it is produced by a process called ...
By Edinburgh Sensors Ltd - TECHCOMP Group Distributor in Oakville, ONTARIO (CANADA).
-
UV Light Systemst for Hydro
A proven biofouling control solution for invasive mussels in hydroelectric facilities with the ability to achieve 100% inactivation even under conditions with less than 50% UVT. Control invasive mussels that clog cooling water pipping and fire control systems and protect turbines and heat exchangers from mussel fouling with the HOD UV ...
By Atlantium Technologies Distributor in Nanaimo,, BRITISH COLUMBIA (CANADA).
-
Material handling equipment for utilities industry
Electric Power Generation, Fossil Fuel Electric Power Generation, Biomass, Alternative Fuels, Sewage Treatment Facilities, Waste Management and Remediation Services, Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services, Materials Recovery, Facilities Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation ...
By TerraSource Global Office in Pointe-Claire, QUEBEC (CANADA).
-
Gas Sensing for Gasification
Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high ...
By Edinburgh Sensors Ltd - TECHCOMP Group Distributor in Oakville, ONTARIO (CANADA).
-
Measurement solution for Biomass combustion research
The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new ...
By Protea Limited Distributor in , ALBERTA (CANADA).
-
Measurement solution for siloxane analysis
Protea can offer online siloxanes analysis using our atmosFIR gas analysers. This allows the real time measurement of siloxanes on plant. We can offer portable siloxanes analysers or fixed siloxane measurement ...
By Protea Limited Distributor in , ALBERTA (CANADA).
-
Waste air combustion for municipalities
By AEREON, part of Cimarron group Office in Red Deer, ALBERTA (CANADA).
-
Waste handling solutions for the refuse derived fuel (RDF) industry
Waste to energy: The use of refuse derived fuel (RDF) is part and parcel of today's regulated waste disposal. Using a selective treatment process, fractions high in calorific value are separated off from commercial and industrial waste, creating a marketable product. Depending on calorific value, composition and particle size, this fuel is used in industrial fluidised bed firings, in cement kilns and in RDF power ...
By Komptech GmbH Distributor in Zahleh, ONTARIO (CANADA).
-
Process analyzers & instruments for combustion efficiency and fuel air ratio
By AMETEK Process Instruments Office in Calgary, ALBERTA (CANADA).
-
Torbed process reactor technologies solutions for biomass processing sector
The advantages of the TORBED technologies for production of energy from biomass are: Faster and more precise temperature control - important with high alkali feed stocks to prevent accretions. Handling of irregularly shaped solid feed stocks – this minimizes feed stock shredding, chipping or milling. Low pressure drop allowing process gas recirculation for maximum turndown - 50:1 achievable. Rapid start-up and program change. Smaller size with easy installation. Simplicity in operation and ease of automation ...
By Torftech Group Office in Oakville, ONTARIO (CANADA).
-
Innovative hydrogen solutions for distributed power generation sector
Is dealing with many of the same issues as the transportation sector – notably deregulation, industry consolidation and, for combustion-powered electricity generation, air emissions concerns and the cost of fuel. Burnouts and rotating power blackouts have become common today which has spurred the demand for reliable, uninterrupted ...
By Innovative Hydrogen Solutions Inc. (IHS) based in Aurora, ONTARIO (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you