Combustion Downloads
-
Premium
Anguil - Vapor Combustor - Enclosed Flare - Brochure
Thermal flaring technologies used for the destruction of Hydrocarbons, Volatile Organic Compounds (VOCs) or Hazardous Air Pollutants (HAPs) are designed in two basic configurations; open and enclosed flame burners. Recent regulations on visible emissions, vapor radiation, Greenhouse Gases (GHGs) and noise pollution have driven industry away from open flaring and towards the enclosed vapor ...
-
Premium
Matthews - Secondary Combustion Chamber - Brochure
The secondary chamber is where waste in the gaseous phase is treated. Combustion gases from the primary chamber are transferred into the secondary chamber for thermal ...
-
Premium
Waste Loading - Brochure
Introducing waste into the primary combustion chamber may be carried out manually or automatically with the choice usually determined by the capacity of the plant and the nature of the waste. Practically bagged waste can be manually loaded into an incinerator having a capacity of up to 200kg/hour. Above this capacity it is generally considered unsafe, physically demanding and operationally as ...
-
Premium
Industrial Boilers Application Note - Brochure
Industrial boilers are used to produce steam, whicl can be used to turn electrical turbines to generate power or provide heat in an industrial process. In all cases, it is important to monitor and diagnose combustion conditions within the boiler to improve its operation, and safety. Key measurements can support the optimisation of the combustion process and minimise emissions. Monitoring the ...
-
Premium
Waste Incineration Application Note - Brochure
Waste incineration is commonly used to dispose of the organic components of both domestic refuse and hazardous waste by burning it under controlled conditions. The heat generated in this process can be used to generate electricity, a process known as Waste-To-Energy (WTE). Because they have the potential to release highly toxic chemicals, such as polyaromatic hydrocarbons (PAH) and heavy metals, ...
-
Premium
Ultramat 23 Gas Analyzer – Unique Solution for Biogas Applications - Brochure
The well-proven ULTRAMAT 23 gas analyzer measurement provides the perfect, simple and complete solution for analysis in biogas plants. It is a proven unique solution in hundreds of installations that combines the measurement of infrared active gases CO2 and CH4 with oxygen and H2S sensors in a single unit. Applicable to determine continuous analysis of the gas composition of fermenters for biogas ...
-
Premium
Inciner8 - Model I8-M80 - Medical Incinerator - Brochure
I8-M80 incinerator is specially designed for medical waste. This model is a controlled air incinerator, providing optimal combustion conditions for different waste types. Front loading design provides excellent liquid retention. The i8-M80 is a medium capacity specialist "M" incinerator which is optimized for medical waste disposal benefiting from a front-loading door, cylindrical combustion ...
-
Premium
Inciner8 - Model I8-20A - Agricultural Incinerator - Brochure
The i8-20A is the smallest DEFRA Type approved agricultural incinerator in our range. The top-loading design means liquids are well contained within this system during combustion. The i8-20A is perfect for small farms, veterinary practices or other small businesses within the agricultural world. It is also one of the most affordable ways to introduce yourself to the world of ...
-
Premium
Inciner8 - Model I8-20G - General Incinerators - Brochure
The i8-20G is perfect for small camps, individual businesses or communities where waste streams are low. It is one of the most affordable ways to introduce yourself to the world of Inciner8. The i8-20G is one of the smallest general incinerators in our range. The top-loading design means liquids are well contained within this system during combustion. The i8-20G General Incinerator is a simple, ...
-
Premium
Inciner8 - Model I8-55G - General Incinerator - Brochure
One of our most popular models is our i8-55G. It is completely flexible and customisable making it one of our most versatile incinerators. The top-loading design means liquids are well retained within the system during combustion and its smaller size belies high efficiency and impressive burn rates. The i8-55G General Incinerator is one of the most popular models in our medium capacity ...
-
Premium
NOXtreme - High Temperature Flare - Brochure
The high temperature flare is the further developed NOXmatic flare for the safe and low-emission combustion of landfill, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas components are fully processed, thus greatly reducing the formation of nitrogen oxides. With a special burner technology and combustion chamber ...
-
Premium
NOXmatic - Model BM - Biomethane Flare - Brochure
The modern preparation of biogas to more efficient, use and transport friendlier biomethane becomes more and more popular. During preparation of the biogas, removal of CO2 and other basic components of the gas resutls in a dramatic change of the gas specific Wobbe Index and therefore new requirements for specification of the flare burner. ennox gas flares can be specially configured for the ...
-
Premium
IMR - Model 6000 - Oxygen / Excess Air Combustion Controller - Brochure
The IMR 6000 is an oxygen / excess air combustion controller to measure, store and control oxygen (02) in a combustion process. The analyzer works with all sorts of fuel (liquid fuels, gas and solid fuels) and calculates C02, combustion efficiency and measures the flue-gas temperature with a separate thermocouple probe. The IMR 6000 can be installed with new boilers and it also can be easily ...
-
Premium
Refining Industry Fluidized-Bed Catalytic Cracking Unit - Application Note
Fluidized-Bed Catalytic Cracking (FCC) is the most important and widely used refinery process for converting low value, heavy oils into more valuable gasoline and lighter products. The typical FCC process will convert 75% or more of the heavy oils into gasoline and lighter products. Originally, chemical cracking was accomplished by thermally heating the oil to extremely high temperatures, but the ...
-
Premium
Refining Industry Fluidized-Bed Catalytic Cracking Unit - Application Note
Fluidized-Bed Catalytic Cracking (FCC) is the most important and widely used refinery process for converting low value, heavy oils into more valuable gasoline and lighter products. The typical FCC process will convert 75% or more of the heavy oils into gasoline and lighter products. Originally, chemical cracking was accomplished by thermally heating the oil to extremely high temperatures, but the ...
-
Premium
LDS 6 - Laser O2 measurement in flare systems - Application Note
Flare systems are used for safe disposal of excess quantities of waste combustibles from oil-wells, refineries, and other chemical or petrochemical plants. Distinction is made between flares with continuous operation and others that are used only in case of emergencies. Flare systems are often equipped with accessories such as steam generators for smoke suppression or additional heaters for ...
-
Premium
Coal Pile Fire Detection - System Overview
Coal Fire Detection The Coal Pile Fire Monitor is part of a range of Coal Fire Detection Systems which are designed to monitor for the conditions in which serious fires and explosions can occur. By monitoring different parameters (temperature, CO, CO2) the systems can prevent expensive repairs and downtime as well as helping to ensure the safety of personnel, plant and equipment. Mill Fire ...
-
VISR Mantis - Brochure
Continuously monitoring the combustion efficiency of an industrial flare has been a long-standing technological challenge. Mantis™ meets this challenge by continuously measuring five important flare metrics in real time: Combustion Efficiency (CE), Smoke Index (SI), Flame Stability (FS), Flame Footprint (FF), Heat Release ...
-
Comessa - Vibrating Fluidized Bed- Brochure
Fluidization confers to a divided solid the properties of a fluid. Products with a wide particle size distribution or including large particles, cannot be processed in a static fluidization equipment. It is the same for products discharged from centrifuges which are sticky or include lumps and which will not permit treatment by direct fluidization. Comessa developed the vibrating fluidized bed to ...
By Comessa S.A.
-
Comessa - Static Fluidized Bed - Brochure
The fluidization is a state of dynamic balance of a divided solid in an ascending moving gas. It confers hydraulic properties to solids (angle of repose equal to zero, easy spreading, total filling of a receiver in which the product is fluidized). Such method of bringing in contact a solid with a gas, allows high mass and heat transfers. Mechanical energy transferred by gas to the particles is ...
By Comessa S.A.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you