Combustion Equipment For Energy Management In Connecticut
-
based in USA
The 9E gas turbine is GE's robust and proven 50 Hz workhorse. With more than 600 units shipped, it has accumulated over 23 million hours of utility and industrial service-often in arduous climates ranging from desert heat and tropical humidity to arctic cold. 9E gas turbine systems are also designed for reliable operation and minimal maintenance at a competitively low installed cost. The 9E gas ...
-
Manufactured by Nel ASAbased in NORWAY
The C Series electrolysers are ideal for a variety of industrial applications. Producing up to 30 Nm3/h of hydrogen gas at 99.9998% purity, these units replace the need for hydrogen tube trailers or liquid hydrogen storage. They can be containerized, and offer facilities flexible siting and reduced operational safety risks associated with delivered ...
-
Manufactured by Zeeco, Inc.based in USA
The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. Our UF flare series is one of the most in-demand flares of its kind for punishing conditions that include extreme ...
-
Manufactured by Nel ASAbased in NORWAY
The world’s most energy efficient electrolysers, the A Series features a cell stack power consumption as low as 3.8 kWh/Nm3 of hydrogen gas produced, up to 2.2 MW per stack. A Series electrolysers can produce up to 3,880 Nm3/h of hydrogen or just over 8 ton per day. Our modular concept enables us to deliver customized indoor hydrogen solutions for any application, configuration and size ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
The rapidly advancing fuel cell industry is persistently striving to become safer, less costly, and more efficient each day. PCI is supporting that mission with our unique burner technology. We are helping to pioneer fuel cell development by adapting our innovative burners to effectively complement emerging advances in the ...
-
Manufactured by Enviro Power, LLCbased in USA
The SmartWatt Boiler is a drop-in replacement solution that more than pays for itself over time by lowering a building’s energy costs. Helping building owners reduce their carbon emissions, the boiler is much more efficient and uses less natural gas than the traditional boilers they replace. ...
-
based in USA
GE's LM2500+G4 aeroderivative gas turbine package combines the successful heritage of the LM2500 Base and LM2500+ aeroderivative gas turbine packages to create a powerful and very reliable solution ideal for marine applications. With a modified zero state for increased flow and pressure ratio as well as its improved design and materials in the high-pressure and power turbines, the LM2500+G4 ...
-
Manufactured by Evans Cooling Systems, Inc.based in USA
Evans Waterless Powersports engine coolant, available in a half-gallon bottle, is designed for powersports racing, motorcycles, ATVs, UTVs and snowmobiles. It has been used by race teams around the world for years to keep their engines safe, no matter what the conditions. They don’t pull over to let their engines cool down, and neither should you. ...
-
Manufactured by Fuel Tech, Inc.based in USA
Combustion air is diverted from the burners to create a fuel rich zone in the lower furnace. Fuel bound nitrogen conversion to NO is inhibited on coal and oil fired boilers. Peak flame temperatures are reduced on gas fired boilers to limit thermal NOx formation. A high momentum air stream intersects burner flames in the upper furnace to complete combustion prior to the boiler convective ...
-
based in USA
Introducing the J920 FleXtra Jenbacher with 49% el. efficiency 60Hz. GE proudly announces the J920 FleXtra Jenbacher 9.5 MW system for 60 Hz with best-in-class 49% el. efficiency for large gas engine power plants at APPA, Denver on June 16th. Whether you're seeking full power at high efficiency levels or a unit capable of short start-up times. GE's J920 FleXtra gas engine is an ideal, reliable ...
-
Manufactured by FuelCell Energy, Inc.based in USA
Comprised of two 1500 plants, FuelCell Energy’s 3000 generates 2.8 MW of reliable, efficient, and ultra-clean power. On-site power can maximize a site’s production uptime by avoiding costly outages. The plant’s electrochemical process results in electricity, heat, and water, with the ability to recycle CO2 into a valuable ...
-
Manufactured by EES - Environmental Energy Servicesbased in USA
CoalTreat® is EES’ fuel chemistry innovation that has proven to be highly effective in mitigating problems attributed to furnace slagging and heat transfer surface fouling in coal-fired utility and industrial boilers. CoalTreat® is applied to the fuel pre-combustion, customized to each plant’s fuels and specific objectives, and has been successfully deployed on several large ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
NOx emissions are a primary contributor to air pollution, and their control is a primary focus of air pollution regulations. PCI is developing a gas turbine engine catalytic combustor that enables low single digit ppm NOx emissions along with high combustion stability, a wide turndown range, and substantial fuel flexibility. PCI's RCL® catalytic combustor technology is a breakthrough, ...
-
Manufactured by FuelCell Energy, Inc.based in USA
Designed for a range of on-site power applications, FuelCell Energy’s 1500 power plant generates 1.4 MW of reliable, efficient, and ultra-clean power. Operating from a compact footprint, the 1500 is ideal for sites with limited space and can combine with more modules to meet higher power ...
-
Manufactured by FuelCell Energy, Inc.based in USA
Solid oxide fuel cell (SOFC) systems will be capable of running as an electrolyzer for hydrogen production or as a fuel cell for electricity production. The 250 kW fuel cell will be capable of running on a wide range of fuels including natural gas, renewable biogas, or ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
Precision Combustion, Inc. (PCI) has developed a catalytic combustor technology breakthrough that offers to fulfill the promise for a downhole steam generator for oil and gas production, a tool that has been long-sought by the oil and gas production industry. We are currently working to develop this technology into a practical tool for oil and gas production. We are interested in discussing ...
-
Manufactured by Fuel Tech, Inc.based in USA
Low NOx burners and Low NOx burner Upgrades are available for both industrial and utility boilers burning a wide variety of fuels and have proven to be a cost effective way to reduce NOx emissions by 40% - 60%. Each system application is specifically designed to maximize NOx reduction without sacrificing combustion performance or unit operation. Computational Fluid Dynamics (CFD) combustion ...
-
Manufactured by American Catalytic Technologiesbased in USA
Catalytic heaters oxidize natural gas, propane and butane flamelessly, emitting medium to long wave infrared energy (3.5 – 7 microns). A platinum catalyst forces combustion below the gas ignition point (1400 Degrees F) generating surface temperatures of 600 – 1000 degrees Fahrenheit. Since the reaction is totally flameless, there are no NOX emissions associated with open flame gas ...
-
based in USA
Pollution Control and Prevention. Clean Technology. Consumption Reductions. Energy Efficiency and Waste Reductions: Power or Fuel. Calf. ARB aftermarket Executive Order (D-612). ...
-
Manufactured by ETTER Engineering Company, Inc.based in USA
ETTER Engineering has developed a line of Enhanced Operator Interfaces, Series FMA-3X, designed to work exclusively with the SIEMENS LMV- 3 Series of Linkage-less Burner Management Systems. The Operator Interface is a color touch-screen which replaces the single line AZL for Daily Operations, and provides graphical display of operating status, parameters, faults and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you