Cooling Lubricant Equipment For Energy Management
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...
-
Manufactured by GlobeCore GmbH - Biodiesel Divisionbased in GERMANY
Installation for mixing and dissolution of any liquids in a stream of the GlobeCore Blending brand is intended for mixing from two to five separate components, in particular low-octane gasoline with additives and other components. At the usual methods of mixing known today, fuel at addition of separate components of parts has properties to be stratified. Feature of offered installation is that ...
-
Manufactured by Coes s.r.l.based in ITALY
Since 2011 Shell & Tube heat exchangers have been added in COES range of products, in order to satisfy Customers needs. They are engineered and manufactured following “project-based” philosophy complying with major standard codes and client specifications. Hundreds of units have been thermally selected, mechanically calculated, engineered and designed, then manufactured and ...
-
Distributed by CTL Scientific Supply Corp.based in USA
Pack Size: box of 100. Hazard Class /UN Number: Not Restricted. Storage Temp: Room ...
-
Manufactured by Kahn & Company, Inc.based in USA
Inherent low inertia and quick transient response make the Kahn Series 101 and 102 dynamometers ideal for load testing of medium speed turboshaft engines, light turboprop engines, auxiliary power units (APUs), engine power takeoffs (PTOs), aircraft accessory gearboxes and helicopter transmissions. In many of these applications, time-consuming coupling shaft alignment is eliminated by mounting the ...
-
Manufactured by Zhongshan Lingyu Machinery Co., Ltdbased in CHINA
Water injected screw compressor is an oil free screw air compressor. It uses water as a lubricant. We are oil free screw compressor manufacturer. Because of water, there is 100% no oil vapors in compressed air. So it has wid applications for sanitary industries. For example, we usually use it for food and pharmaceutical industries. Compared to normal oilless air compressor, it has many ...
-
Manufactured by Zhengzhou Aokman Machinery Co., Ltd.based in CHINA
AOKMAN® Roller Press Planetary Gearboxes(gear units) are designed and optimized to adapt to the poor working conditions of continuous duty, low speed, heavy load, high impact and dusty for cement roller press main drive. Input Speed: 1000~1500RPM. Ratio: 25~85. Efficiency: 94%~96%. Working Temperature: -10℃~40℃. Parameters: ...
-
Manufactured by HangZhou Truemax Machinery & Equipment Co.,Ltdbased in CHINA
In line with the strongly increasing requirements of the building industry, the demands placed on the equipment used on large-scale construction sites are rapid increasing. TRUEMAX stationary concrete pump 80.16.110E is a powerful highly resistant machine used for high rise applications and long distance pumping. The structure is impressive thanks to its high conveyance output despite working ...
-
Manufactured by SHINEHEAT TECH (SHANGHAI) CORPbased in CHINA
Plate Heat Exchanger is widely apply for Marine Application As to illustrated by following drawing, the main application for Marine Plate Heat Exchanger is "HT Cooler", "LT Cooler" and "Lube Oil Cooler". "HT Cooler" and "LT Cooler" is Primaiy Cooler and Secondary cooler for Jacket Cooling Water from Main Engine System, the Cold Fluid is from Sea Water, so the plates always are Titanmium Plates. ...
-
Manufactured by Fusheng Co., Ltdbased in TAIWAN
SAV-M series magnet variable speed drive screw air compressor adopt high efficiency oil-cooled magnet frequency motor, intelligent frequency conversion control and screw airend , also upgrade optimization design of the system. Compared with the traditional frequency conversion screw air compressor, the specific power much better, and compared with the air compressor driven by the fixed speed, the ...
-
Manufactured by GlobeCorebased in GERMANY
Essential operation and optimization of BioDiesel Blending systems in a flow is carried out by process engineers of the GLOBECORE company by whom it is developed and delivered on a mass production a number of mixing installations under the name “USB” of compounding of fuels and any liquids (from two to five components) in a flow including with components of a phytogenesis and ...
-
Manufactured by GlobeCorebased in GERMANY
Installation for mixing and dissolution of any liquids in a stream of the GlobeCore Blending brand is intended for mixing from two to five separate components, in particular low-octane gasoline with additives and other components. At the usual methods of mixing known today, fuel at addition of separate components of parts has properties to be stratified. Feature of offered installation is that ...
-
Manufactured by Bowman Power Group Ltdbased in UNITED KINGDOM
Our best seller to date and the best option for gas and diesel-fuelled gensets in the 150kW-400kW ...
-
Manufactured by Fluid Tech Systemsbased in INDIA
Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTX” (Gear Pump, Lubrication Oil Gear Pump) which is most efficient and economic range of flange and foot mounting type positive displacement rotary gear pump. Model “FTX” having Single helical shrink fitted gear pair and hardened and grind finished shaft. Ultra bronze sintered bushes ensured smooth ...
-
Manufactured by Unnati Pumps Pvt. Ltd.based in INDIA
UO3 series 3-inch submersible motors - Ideal for water-wells of 3-inches or larger diameter. Easy to repair or rewind as fitted with CSCR and CSR system, the UO3 series is fitted with enameled copper wire (Class-H) for stator winding. For flawless sealing this submersible motor is fitted with a mechanical shaft seal of carbon and ceramic and oil seal of Nitrile rubber. But that’s not all, ...
-
Manufactured by Turqpower Generatorbased in TURKEY
Engine with direct injection, water cooled engine, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the ...
-
Manufactured by Turqpower Generatorbased in TURKEY
Engine with direct injection, water cooled engine, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following ...
-
Manufactured by Turqpower Generatorbased in TURKEY
Alternator: Flexible disc.Close coupled: Brushless alternator. Self-excited, self-regulated. Class 'H' insulation limited to temperature rise of class H. Salient pole revolving field -Single bearing. Automatic voltage ...
-
Manufactured by Kawasaki Gas Turbinesbased in USA
Ideal for reliable on-site base load power generation requiring from 4.5 MW to 5.2 MW for co-generation applications.The GPB60/60D is based on Kawasaki's proven M7A heavy duty industrial gas turbine with over 15 years of commercial experience and proven reliability. At 5.4 MW (ISO), it is ideal for cogeneration applications in offshore oil platforms, industrial process plant applications, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you