District Heating Equipment For Energy Management Available In Africa
-
ShowcaseManufactured by EnviTec Biogas AGbased in GERMANY
Waste materials and by-products are accrued in conjunction with every single manufacturing operation, such as enterprises associated with the food and restaurant sector, the fuel industry, the cosmetics sector and the animal husbandry sector. However, the quantity of organic waste produced by the citizenry is also significant for communes – about half a tonne per year per person. In ...
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
A gas turbine engine is a type of internal combustion engine. Essentially, the engine can be viewed as an energy conversion device that converts energy stored in the fuel to useful mechanical energy in the form of rotational power. The term “gas” refers to the ambient air that is taken into the engine and used as the working medium in the energy conversion ...
-
PremiumManufactured by Gazpack B.V.based in NETHERLANDS
Gazpack is all aware that gas flaring is becoming a major area of concern in today’s growing market where the emphasis is hugely focused on the negative environmental impacts and how we can change these practices quickly and efficiently. Therefore Gazpack has way to shut down flares without pollution. Blended flare quencher are applicable with a significant h2s content. In order to cut global ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar's modular concept for gas turbine generator sets has been optimized for transportation and the scope has been minimized for civil works with our Power Generation Module (PGM). Good for non-hazardous applications only, our PGM solution results in shorter installation and commissioning times, and reduces overall costs for our ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Over recent years companies and organisations of all sizes have been diligently researching new ways of reducing costs and improving the efficiency of their industrial processes. One of the ways we can help companies to achieve these goals is to utilise the heat generated by the incineration process through Energy Recovery Systems in order to provide valuable resources that can be subsequently ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhaust gases, by passing them through a gas tube heat exchanger. Heat is exchanged with the external water jacket, generating hot water for district heating or for industrial ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
If you need electricity and thermal energy simultaneously, a cogeneration system may be your solution, and can offer a favorable return on investment. Cogeneration allows you to benefit from two or three forms of energy for the price of one, with minimal environmental impact. These systems can turn clean-burning natural gas into cost-effective, reliable electricity, use steam for production ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The UT-L is a particularly reliable and efficient heat generator with output from 650 to 25,000 kW at up to 16 bar. The design complies with the Gas Appliances Regulation. The heating boiler offers high performance and is extremely compact. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The CX400 combines very high efficiency (nominal 35%) with excellent emissions performance to a compact industrial design. This makes it the ideal choice for a wide variety of power generation applications. For industrial cogeneration, the high steam-raising capability of more than 27 tonnes per hour contributes towards achieving overall plant efficiencies of 80% or higher. Incorporating proven ...
-
Manufactured by Barriquand Technologies Thermiquesbased in FRANCE
The Platular® fully welded plate heat exchanger’s thermal performance and minimal temperature approach is particularly suitable for exchanges on difficult, viscous fluids or fluids charged with suspended materials, but also for the condensation of vapor under vacuum (steam, C.O.V…). Thanks to the multi-pass design possibilities on each circuit, the Platular® is also well ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Two cylinders, single LP cylinder. This configuration covers with state of the art performances a broad range of applications: typical are combined cycles, solar and biomass with big flexibility in steam conditions provided by different versions of the same basic standard. Sliding pressure operations with full arch admission is typical although control stage versions can be supplied as well. This ...
-
Manufactured by Mannesmann Line Pipe GmbHbased in GERMANY
Complex and mostly buried pipe systems are required to ensure reliable supplies of heat energy over large distances. The medium pipes used for this application must meet high standards and withstand severe mechanical ...
-
Manufactured by GP Green Energy Systems Pvt. Ltd. (GP Energy)based in INDIA
The Dual Fluidized Bed ( DFB ) Gasifier developed by Gussing Renewable GmbH (GRE) with the technology introduced by Vienna University of Technology, is considered as the most sophisticated process for the production of gas from renewable resources in the world and is state of the art. At the heart of the FICFB (Fast Internally Circulating Fluidized Bed) reactor are two interconnected fluidized ...
-
by Gear Solarbased in USA
For lower temperature applications, GEAR Solar's Solarpac thermal collectors with heat pipes may be installed in banks of up to 10 collectors in series and unlimited parallel-connected ...
-
Manufactured by Aranerbased in UNITED ARAB EMIRATES
Heat pumps are able to move thermal energy the opposite direction of spontaneous heat flow, providing cold and heat loads depending on the needs. Heating Pumps are more efficient than other technologies thanks to their minimum power consumption: they are considered renewable energy always that the performance reaches a minimum ...
-
Manufactured by Hafner Srlbased in ITALY
Depending on the waste heat value, two different combustion technologies are used. Grate firing with an integrated steam boiler plant is used for low to medium-calorific waste. And for highly calorific waste, a rotary kiln with afterburning chamber and waste heat boiler is ...
-
Distributed by Innovative Steam Technologiesbased in CANADA
Steam generation for Cogen plants involves significantly less maintenance and wasted energy with IST’s OSTG technology. Initial installation time and associated costs are also reduced because the IST unit is factory built and shipped virtually ready to connect. Each pressure part module is completely hydrostatically tested prior to shipment, often 100% of the pressure parts are also welded ...
-
Manufactured by INTEGRA Metering AGbased in SWITZERLAND
Hydraulic transducer DN 20 - 40. Temperature range 0 - 130°C. Multi-jet impeller ...
-
Manufactured by INTEGRA Metering AGbased in SWITZERLAND
Applications: Residential buildings / Sanitary, Commercial buildings / Building technology, Local and district heating / cooling. Medium: Heat, Cold. Process: ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you