District Heating Equipment For Energy Management In Canada
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
A gas turbine engine is a type of internal combustion engine. Essentially, the engine can be viewed as an energy conversion device that converts energy stored in the fuel to useful mechanical energy in the form of rotational power. The term “gas” refers to the ambient air that is taken into the engine and used as the working medium in the energy conversion ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar's modular concept for gas turbine generator sets has been optimized for transportation and the scope has been minimized for civil works with our Power Generation Module (PGM). Good for non-hazardous applications only, our PGM solution results in shorter installation and commissioning times, and reduces overall costs for our ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
If you need electricity and thermal energy simultaneously, a cogeneration system may be your solution, and can offer a favorable return on investment. Cogeneration allows you to benefit from two or three forms of energy for the price of one, with minimal environmental impact. These systems can turn clean-burning natural gas into cost-effective, reliable electricity, use steam for production ...
-
based in CANADA
QMC is proud to offer GWF’s Superstatic 440 thermal meter for new and existing projects. The SuperStatic 440 is designed to provide cooling and heating energy, combined heating and cooling, and flow ...
-
Distributed by Innovative Steam Technologiesbased in CANADA
Steam generation for Cogen plants involves significantly less maintenance and wasted energy with IST’s OSTG technology. Initial installation time and associated costs are also reduced because the IST unit is factory built and shipped virtually ready to connect. Each pressure part module is completely hydrostatically tested prior to shipment, often 100% of the pressure parts are also welded ...
-
Manufactured by Tranter Incbased in USA
Sustainable Energy utilization has become a global imperative. Tranter’s wide range of gasketed plate & frame heat exchangers enables our customers to reduce their energy consumption and the greater thermal efficiency of the heat exchanger the more energy can be saved. Therefore, Tranter has developed a highly efficient and innovative plate pattern, called the Omniflex™, featuring ...
-
Manufactured by AIC Inc.based in CANADA
A collaboration of practicality, versatility, durability, and a dash of novelty, the LENS heat exchangers break the mold with a new multi-functional, multi-dimensional, transformative ingenuity opening doors to unprecedented possibilities in fluid dynamics and process control. The strength of the LENS series lies in its adaptive nature, allowing customization of standard products to optimize ...
-
based in CANADA
QMC is proud to offer GWF’s Superstatic 789 thermal meter for new and existing projects. The SuperStatic 789 a lightweight and robust compact heat and cooling meter. It consists of a flow meter meter using high quality composite materials, a detachable communications integrator, and a pair of temperatur ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
Spire Metering’s T-MAG electromagnetic BTU meter is designed to accurately measure the heat or cold energy of a water heating/cooling circuit. It is consisted of three parts, an electromagnetic flow sensor, a pair of temperature sensors and a main unit. The main unit is a powerful console which combines high accuracy flow measurement, temperature measurement and BTU ...
-
Manufactured by AIC Inc.based in CANADA
Brazed plate heat exchangers consist of stainless steel plate plates, which have embossed chevron patterns. The plates are turned 180° to each other, causing the plate ridges to intersect, and creating a lattice of intersecting channels. The fluids can flow in counter-current or co-current way. Special corrugation patterns promote high turbulence flow. Turbulence dramatically improves ...
-
Manufactured by AIC Inc.based in CANADA
AICs standard line of E-Line economizers is the optimal solution for boiler flue gas heat recovery. Covering a wide range of boiler sizes, the E-Line delivers real energy and cost savings for commercial and industrial installations. In principle the E-Line economizers act as air to water heat exchangers. Flue gas, typically considered wasted heat, can be effectively cooled down and condensed ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
The 280T heat meter offers the most advanced BTU measurement by using state-of-the-art ultrasonic flow measurement technology. It does not have moving parts to wear out, thus, literally requires no maintenance. It is also very cost-effective. This means both commercial and residential installations can profit from the advantages of wear-free heat measurement: precision, operating security ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
The BTU meter RH33 is used in applications with liquid energy carriers. It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device. Potential for cost savings can be shown by using the software available as an accessory. The device has a custody ...
-
Manufactured by SHARC International Systems Inc.based in CANADA
The SHARC system exchanges energy with wastewater that would otherwise flow down the drain. The result is a limitless supply of thermal energy available for space conditioning and domestic hot water heating. The SHARC is suitable for multi-unit residential, commercial buildings, and district energy ...
-
Manufactured by Nexterra Systems Corp.based in CANADA
For customers who need high pressure super heated steam for conventional steam turbine power generation or for any other high pressure steam requirements (such as District Energy Plants, Industrial Process Plants and Independent Power Producers), Nexterra can provide economical steam systems capable of over 650 psig of superheated steam. The desired balance between power and heat will dictate the ...
-
Manufactured by Nexterra Systems Corp.based in CANADA
Nexterra's next-generation power generation systems can provide clean, reliable syngas suitable for firing in high-efficiency internal combustion engines designed for stationary power/CHP applications. This high-efficiency power/CHP solution is ideal for District Energy Plants and Independent Power Producers where power prices are particularly high and where efficiency is a critical ...
-
Manufactured by SED Flow Control GmbHbased in GERMANY
Heating and district heating controllers; MISSION; building automation, APPLICATION; meter reading. heating control. Drinking water preparation. district heating. district heating. cold control. Thermal solar systems. temperature ...
-
Manufactured by Cleaver-Brooksbased in USA
The Cleaver-Brooks Max-Fire boiler incorporates an integral furnace in a single shop-assembled package heat recovery steam generator (HRSG) that combines a furnace and evaporator and superheater, if applicable, with a natural circulation design. Capable of steam flows up to 500,000 lb/hr, the Max-Fire Series is offered in two different models. The MF (O-style) and MFA (A-style) models combine the ...
-
Manufactured by Grundfosbased in DENMARK
The MAGNA3 D circulator pump means double the performance and reduced downtime. The two pumps communicate wirelessly and connects directly with the Grundfos GO app via ...
-
based in CANADA
District solar heating and cooling is a prime application for the Ultra Lite solar concentrator. In this application, the operating temperature normally fed to a district (Central Distribution Hub as pictured above) is about 75C with a return temperature of about 50C. Most flat panel absorbers may be able to achieve 80 C at solar noon, but this is insufficient for storing up to 100 C for water ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you