Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable...
For many years, sugar mills have burned bagasse, the fibrous byproduct of the processing of sugarcane, using special boilers that produce the steam needed to help break down the sugar cane.
As the cost of powering this equipment by burning fossil fuels has steadily risen, the use of biofuel cogeneration as a source of power production has become more prevalent. Many sugar mills have updated their bagasse-fired boilers and linked them to generators that produce electricity used to power the mill’s operations...
The generation and distribution of electricity consists of processes such as power stations, power transmission, electricity distribution and electricity retailing. PROCO Products has an inventory of check valves and expansion joints that are suitable for power generation industries, and can handle the stresses and pressures that are a normal part of the process. PROCO operates worldwide, and maintains one of the largest product inventories in North America.
You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.
Due to the increase in extreme weather events and deferred investments in the grid, many communities experience a growing rate of grid outages. Energy storage systems can bring peace of mind to those who live in areas prone to storms or unreliable utility grids. Eguana`s energy storage solutions are designed to automatically switch to battery power in the event of an electric company outage.
Interlocks can be used in many process or procedural systems within Ports involving the transmission of electricity, including crane movement, Ship to Shore power, and local substations or backup generators. KIRK type DM locks with chain that are attached to medium voltage connectors located in quayside vaults ensure proper procedure is followed when connecting shore to ship power. These MV connectors feed the ships with crucial electricity, enabling diesel on-ship generators to be switched off whilst in dock,...
We serve incumbents and new entrants in this rapidly expanding and liberalized sector. We help clients with issues related to organization, operations, and strategy. Our capabilities include organizational restructuring, building capabilities, and top-team management as well as capital investment, cost reductions, performance improvement, networks, and logistics. We also provide strategic direction on mission, sales, economics, and procurement.
Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.
Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric.
Is it suitable for you?
Local utilities feeding district heating
Pellet manufacturing companies
Manufacturers of MDF / OSB panels
Power companies face access challenges as they move heavy vehicles across wet, soft ground for maintenance of power lines and utilities. Access is often through environmentally-sensitive areas such as marshes and low-water crossings and undeveloped land with low soil strength. With the GEOWEB system, roads are built with 50% less cross section of aggregate, even allowing use of locally-available fill, to support heavy vehicles with minimal environmental impact. Whether for maintenance vehicle access at substations...
Providers and operators of engine power plants and mobile electrical supply systems can use our container solutions to efficiently turn engine exhaust gases and/or cooling water into clean electricity. Our containers work perfectly with diesel and gas engines, increasing electricity generation by up to 100 kilowatts per 1,400 kilowatts of generator power.
Waste tyre recycling the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant. You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution .
As the fuel material used in Cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc.
2. Final diesel come out from our...
STEKLONiT offers solutions for wind energy, one of the most promising sectors of electric-power industry. Thanks to inherent high quality, physical-mechanical properties, light weight, STEKLONiT’s glass fabrics are used in manufacture blades and tubes of wind power generators. Products can be manufactured according to a customer`s requirements and delivered to any place in the world.
The debate around the phase-out of nuclear power has highlighted it once again: there`s no getting away from renewable energy. Improvements in efficiency and performance are the challenges that manufacturers must now face. And it is precisely here that the innovative adhesive technology from Lohmann plays an important role. The more reliably and efficiently components are connected, the longer-lived and more economical the overall system is – irrespective of whether energy is obtained from solar systems or...
Faced with environmental issues, the energy production sector has had to make major changes to its activities to help mitigate climate change. The Paris Climate Agreement signed at COP21, effective starting in November 2016, confirmed these efforts and the ramping up of the energy transition on an international scale.
As is the case in many countries, utility-scale power plants that produce renewable energy at the megawatt level are eligible to receive the Turkish government’s support via financial incentives. These power plants, whose operating costs are much lower than those of conventional power plants, can sell renewable power to electricity distribution companies at a government-guaranteed price over a fixed period of time. Companies or individuals can invest in and develop both licensed and unlicensed renewable energy...
PV performance measurements under real outdoor conditions are done in may different ways. However, the concept of all performance investigations is to relate the input energy, which is the solar radiative flux, to the output energy, which is the electrical power produced by the PV module. EKO’s Solar Monitoring Stations, referred to as SMS, is the dedicated facility for this type of evaluation.
Usually, the performance of a PV module is measured at the factory under the so-called Standard Test Conditions (STC), described in IEC 60904. This is a convenient test method that can be integrated in routine production procedures. However, the indoor measurement of the STC PV performance reveals the power production of the module at only one particular measurement condition.