Electrical Power Equipment For Energy Management In Africa
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
A gas turbine engine is a type of internal combustion engine. Essentially, the engine can be viewed as an energy conversion device that converts energy stored in the fuel to useful mechanical energy in the form of rotational power. The term “gas” refers to the ambient air that is taken into the engine and used as the working medium in the energy conversion ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME-SLIM packages represent 40 years of experience in electric heating, temperature control, and manufacture of large integrated package ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
Wood Shaving Machine is special design wood working machine, which used for making wood shavings from wood logs, or wood pieces. These soft wood shavings used for animal bedding or wood pellet producing, wood shavings size and thickness can be ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Spartan™ EMD, a standardized EMD, provides exceptional support throughout the equipment’s entire life cycle. Benefits include: Standardized Product Configurations. Pre-Engineered Package Design. Expanded Power Range. Comprehensive Lifecycle product ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Many regions across the globe do not have easy access to the fuel or electricity required to run a traditional incinerator. Our containerised solar incinerator is just another innovative development from our R&D programme. Sheep farmers are acutely aware of the rising costs associated with the disposal of fallen livestock and animal by-products. Incineration not only reduces these costs, but ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 now offer a full range of containerised incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerisation enables immediate waste management as the units are fully assembled and pre-installed. ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhausting gas by passing them either through a gas tube heat exchanger or across a radiant tube boiler. Energy is exchanged between the gases and water to produce steam for heating or industrial processing. When used for electrical power production, the steam is further heated within a super-heater to produce a dry steam to drive a ...
-
PremiumManufactured by AFKO Ltd. Şti.based in TURKEY
Sland By Power: Supplying of emergency electrical power at variable ioad. in the event ol normal utility power taiiire. This rating is maximum power, no overload capability is available. Prime Power: Supplying ol electrical power at variable load (or an unlimited numbef of hours in Hie eveni ol normal ulilily power failure. 10% ovor load capability is ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar's modular concept for gas turbine generator sets has been optimized for transportation and the scope has been minimized for civil works with our Power Generation Module (PGM). Good for non-hazardous applications only, our PGM solution results in shorter installation and commissioning times, and reduces overall costs for our ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Incineration is a waste treatment process that involves the combustion of organic substances contained in waste materials. Incineration and other high-temperature waste treatment systems are described as “thermal treatment”. incineration of waste materials converts the waste into ash, flue gas and heat. The ash is mostly formed by the inorganic constituents of the waste and may take ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
If you need electricity and thermal energy simultaneously, a cogeneration system may be your solution, and can offer a favorable return on investment. Cogeneration allows you to benefit from two or three forms of energy for the price of one, with minimal environmental impact. These systems can turn clean-burning natural gas into cost-effective, reliable electricity, use steam for production ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Constructed in 1.5-inch square steel tube 12, 14 and 16 gauge. Also includes a double acting Hydraulic hand pump. This charging bier is fully CE Safety Certified and incorporates an Anti-Bacterial finish. Principally designed for charging directly into the cremator. The manual operated pump is a standard feature standard and the bier is designed with a standard overhang of ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The Sirocco is our smallest and most portable waste incinerator and has been designed to be easy to relocate and use almost anywhere. Requiring just a small amount of electricity to power the fan - no other fuel source is required. The efficient process reduces waste to as little as 3% of its initial volume. It uses cyclonic air technology by using the high-pressure fan to pull air into the main ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Incineration is a waste treatment process that involves the combustion of organic substances contained in waste materials. Incineration and other high-temperature waste treatment systems are described as “thermal treatment”. incineration of waste materials converts the waste into ash, flue gas and heat. The ash is mostly formed by the inorganic constituents of the waste and may take ...
-
Manufactured by Amerisolarbased in USA
Amerisolar’s photovoltaic modules are designed for large electrical power requirements. With a 30 year warranty, AS-6P30 offers high-powered, reliable performance for solar projects, both on- and ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
-
Manufactured by Bluewater Energy Services B.V.based in NETHERLANDS
One of the key components of Floating Production Systems is the multi product swivel. This component enables the production vessel to freely weathervane, while transferring oil, water and gas streams (as well as electric power, utilities, chemicals and optical signals), without ...
-
Manufactured by Integrated Flow Solutions, Inc. DXPbased in USA
Integrated Flow Solutions Heat Transfer/Hot Oil Systems are designed to store and transfer heat transfer fluids used for industrial heating. The heat transfer fluid is normally stored in an elevated insulated vessel skid mounted. Special high temperature centrifugal pumps are used to circulate the heat media fluid from the storage tank through an electric process heater, gas fired heater or ...
-
Manufactured by Sgorbati Groupbased in ITALY
This grading machine can be adjusted to suit the requirements of the product, resulting in optimum capacity and maximum accuracy. Opt for sloping trays, a higher forward speed and maximum capacity or adjust the trays to the horizontal position and benefit from optimum precision. The unique, independently mounted and driven grading decks make this possible. ...
-
Manufactured by Metalogalva - Irmaos Silvas, SAbased in PORTUGAL
A Substation is a high-power electrical installation, containing equipment for transmission, distribution, protection and control of electrical power. Works as a point of control and transfer in a power transmission system, controlling and directing the energy flow, changing the voltage levels and functioning as delivery points to industrial ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you