Dürr MEGTEC’s industry-leading experience in air handling, drying, heating, cooling, process and combustion control can help improve the operating efficiency of your facility and maximize the performance of your equipment. By analyzing current process energy usage, we can offer solutions to reduce your energy consumption.
Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities view energy consumption. Process equipment and air pollution control systems that were installed several years ago may not reflect the energy conscious designs available today, analyzing these systems to determine energy reduction opportunities can be a very valuable practice. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.
Decades of experience pay off, especially in the field of oleochemistry. Through the use of our technologies, high-quality products can be produced with a wide variety of raw materials, taking into account individual requirements. Product purity, environmental compatibility and minimal energy consumption are the focus. Therefore, innovative systems for energy recovery and sophisticated process links are a matter of course.
Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...
Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.
Steam enhanced oil recovery burns fossil fuel to generate steam to inject in production wells to boost oil output. CSP can be used to generate steam for this use. Hyperlight uses the lowest cost materials, manufacturing method, and installation technique of any CSP technology yet deployed for industrial process heat and can be deployed at the smaller scale needed for commercial and industrial customers.
We help hospitals save money by reducing their fuel bills while also lowering their greenhouse gas emissions. Our proven solutions can increase the efficiency of your heating and steam system to as much as 95% with typical project paybacks (for our combined technologies) within three to five years.
The range of supply of biogas to electricity solutions is from 10 kW to 1 MW. All the components of the solution are provided with matching capacities.
It comprises the biogas digester system of the desired capacity, gas storage, biogas cleaning system to get rid of H2S from the gas, and the biogas genset. In the digester system, one may have a pre-digester or a feed mixing chamber or both. On the post-digester side, liquid from the slurry is separated and is recycled for feed preparation. It reduces the overall...
Collect valuable biogas from anaerobic digestion systems with a GTI gas collection cover. In waste-to-energy projects, the collected biogas can be used as a renewable fuel to generate process heat or electricity, helping to offset energy costs.
Reduction of perating costs: The increased energy costs over the last years have made investments towards heat recovery solutions not only cost effective but profitable. With the support and input of our employees and our technical know how, are improvements and solutions concerning heat recovery become feasible.
Whether you’re generating power for a single job site or hundreds of thousands people, power generation is a mission critical application. Thermal Structures products offer the extreme performance, durability and ease of installation that power generation requires.
Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.
The K&S Engineering company as a technology 'know-how' supplier has prepared algorithms for optimizing energy storage systems and developed a new simulation tool for it. Using this special simulation software, not only the major yield forecasts for the investors are done in detail, but it is also possible for the applied control algorithms to perform optimizations. With this, K&S offers a consultancy service combining photovoltaic-energy-storage-system design and the perfectly match of the upcoming control...
The MRP Modular Barrier System has been extensively used at nuclear power stations and decommissioning sites. In the UK the MRP Barrier has been used at a number of nuclear sites to provide shielded storage areas for waste in drums and ISO containers; temporary walls during maintenance operations and refurbishment of cell windows. The MRP Shield has been deployed at Hunterston, Sizewell, Berkeley, Oldbury and Hinkley power stations and at Sellafield and Dounreay.
Turboden ORC can produce electricity by recovering heat from industrial processes, reciprocating engines and gas turbines. The power of Turboden units generally ranges between 200 kW and 15 MW electric.
HydroThane BSP technology is the best method for H2S removal combining deep H2S removal, a very high reliability and availability, and low lifecycle costs. The clean biogas can be used to produce electricity or to replace natural gas in a boiler.
Thermal Energy International has helped several well-known pharmaceutical companies in North America and Europe reduce their energy costs and carbon dioxide emissions. Our FLU-ACE heat recovery system recycles the heat normally lost through the boiler flue gas exhaust – reducing energy consumption on most boilers by 10% to 20%.
While mechanical pulp has many benefits (yield and optical qualities being at the top), as energy costs rise, the competitiveness of mechanical fibers declines. You can benefit from new ANDRITZ PULP & PAPER technologies that produce mechanical pulp of high quality at significant reductions in energy consumption.