Energy Costs Equipment For Energy Management Available In Canada
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The UT-L is a particularly reliable and efficient heat generator with output from 650 to 25,000 kW at up to 16 bar. The design complies with the Gas Appliances Regulation. The heating boiler offers high performance and is extremely compact. ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Biogas, sewage gas and land fill gas contains not only water vapour, but also a whole host of additional impurities such as hydrogen sulphide, NH3 and siloxane, which, when processed in the utilization system can not only lead to a reduction in efficiency, but also result in damage of the ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Over recent years companies and organisations of all sizes have been diligently researching new ways of reducing costs and improving the efficiency of their industrial processes. One of the ways we can help companies to achieve these goals is to utilise the heat generated by the incineration process through Energy Recovery Systems in order to provide valuable resources that can be subsequently ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
-
Manufactured by Custom Fabricating & Repair, Inc.based in USA
MVR (mechanical vapor recompression) and TVR (thermal vapor recompression) designs are available to optimize initial capital cost, energy efficiency, and Return on ...
-
based in SWITZERLAND
MEE is used when a large amount of water has to be evaporated and steam is inexpensive. The first effect is steam-heated, and vapour from the first evaporator heats the following (second) effect. The second effect vapour heats the third effect, and so on. By utilizing MEE, the specific energy consumption falls significantly. The number of effects ranges from 2 to 10, and is typically limited by ...
-
Manufactured by All Green Energy NVbased in BELGIUM
World over, energy consumption comes in handy for households. With panda stoves for home, each household has an opportunity to save the cost of energy used in cooking by a significant amount and at the same time contribute to energy ...
-
Manufactured by Roller Die + Formingbased in USA
Solar panels are becoming increasingly common. You now see solar panels mounted on homes, businesses, billboards, and boats. If you are looking to make the best possible solar panel mounts, you want to consider roll forming. The main reasons you want roll formed solar panel mounts are speed, savings, and stability. In short, at Roller Die + Forming, we are always working on improving our speed of ...
-
Manufactured by BEHLEN Industries LPbased in CANADA
BEHLEN is proud to present our unique FRAMELESS steel building system that offers visual appeal, creative versatility and durability, while capitalizing on a construction technique that saves time, labour and materials. BEHLEN FRAMELESS steel buildings are constructed with our engineered panel system, eliminating the need for structural steel. This unique system allows us to offer low cost, ...
-
Manufactured by Mass Megawatts Wind Power, Inc.based in USA
Small businesses have a great opportunity for substantial savings with a Mass Megawatts Solar Power System. Unlike most residential locations, many commercial sites consume a higher level of energy that causes them to incur a demand charge from the utility. When this happens, energy costs can increase significantly, often adding a premium of over 30% to the total bill. This is often classified as ...
-
Manufactured by Surgically Clean Air Inc.based in CANADA
Decrease Pollutants; An unprecedented 1 million cubic feet of air passing through the system every 60 minutes. Decrease pollutants in any size factory or warehouse with 1 unit per 20,000 sq ...
-
Manufactured by Nova Battery Systems a Division of Technology Dynamics Inc.based in USA
We offer Primary Battery Cell Technologies solutions for a variety of applications. Primary batteries are single-use batteries, primarily utilized for convenience and lower initial cost. In general, primary batteries have a higher capacity than rechargeable batteries. ...
-
Manufactured by Iqony GmbHbased in GERMANY
Energy plants are the heart of your production. They have to supply heat and power reliably – and increasingly sustainably and renewably, while ensuring a high level of availability. Cogeneration technologies, such as combined-cycle gas turbine (CCGT) power plants, the use of energy from renewable sources, the use of residual materials or waste generated in production, and the use of waste ...
-
Manufactured by AirFixture, LLCbased in USA
Installation of a traditional overhead VAV system requires careful coordination, a formidable financial investment, and a significant amount of labor. Designing the ducting is time consuming for engineers and tricky for installation contractors. No design ever gets installed like it’s drawn. Balancing the air outlets is another major challenge, as any future changes to the VAV require ...
-
Manufactured by Faultrap Srlbased in ITALY
Faultrap manufactures and supplies Energy Storage Systems based on BATTERIES, EDLC and LIC able to store energy when cheaper, and shift loads from the electric grid to stored power when demand is high. Commercial and Industrial Users can take advantage of incentive electricity rates while avoiding high demand charges while Utilities can increase system resilience by tapping into energy stored by ...
-
Manufactured by Flex Energy Solutionsbased in USA
Cogeneration, also known as combined heat and power (CHP), is the simultaneous production of electricity and heat from natural gas. Flex Turbines® recover the heat normally lost in traditional grid electricity generation and use it for heating, cooling, dehumidification and other ...
-
Manufactured by PowerTap Hydrogen Fueling Corp.based in USA
PowerTap generates hydrogen on-site. It converts natural gas and city water into high-purity hydrogen directly at the point of use. Eliminate the cost and complication of delivered hydrogen and easily secure your own dedicated hydrogen supply. PowerTap uses one of the smallest footprints in hydrogen generation to provide a highly economical hydrogen supply option, available within minimal lead ...
-
Manufactured by Micropyretics Heaters International Inc.based in USA
Stable Thermal Cascade Plasma Generator. CleanElectricFlame. Easy ...
-
Manufactured by Bevi ABbased in SWEDEN
Soft starters with torque control start which provides additional 20% lower start currents compared to conventional soft starters. Reduced start currents and mechanical stress means lower installation, energy and maintenance ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you