Energy Efficiency Equipment For Energy Management Available In Europe
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
A gas turbine engine is a type of internal combustion engine. Essentially, the engine can be viewed as an energy conversion device that converts energy stored in the fuel to useful mechanical energy in the form of rotational power. The term “gas” refers to the ambient air that is taken into the engine and used as the working medium in the energy conversion ...
-
ShowcaseManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The DSV Venturi Steam Traps are designed for multipurpose applications from line drainage, trace heating, through to medium heat exchanger ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
If you need electricity and thermal energy simultaneously, a cogeneration system may be your solution, and can offer a favorable return on investment. Cogeneration allows you to benefit from two or three forms of energy for the price of one, with minimal environmental impact. These systems can turn clean-burning natural gas into cost-effective, reliable electricity, use steam for production ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar's modular concept for gas turbine generator sets has been optimized for transportation and the scope has been minimized for civil works with our Power Generation Module (PGM). Good for non-hazardous applications only, our PGM solution results in shorter installation and commissioning times, and reduces overall costs for our ...
-
PremiumManufactured by Gazpack B.V.based in NETHERLANDS
The Sulaway® unit is the heart of the Gazpack installation and fully customer specific. Our Suluway® is built to convert large capacities of biogas to biomethane (>1500 Nm³/h). Therefore, a wide range of capacities can be achieved. Thus, we can offer solutions for large-scale upgrading and the system can handle high H2S ...
-
PremiumManufactured by C&G Depurazione Industriale S.r.l.based in ITALY
Energy Saving: The refrigeration plant has two boiling chambers: the high pressure side is used to bring the product being treated to boiling point in the first boiling chamber, while the low pressure side is used to condense the steam produced in the second stage. This allows an energy saving of about 45%. Volumes processed 150 - 40,000 ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's highly efficient Excelsys Xsolo power supplies deliver up to 1000 W for use in medical, scientific, industrial, and harsh environmental ...
-
PremiumManufactured by Harp Renewables Limitedbased in IRELAND
Another element of Harp Renewables is LED Lighting solutions. We offer energy reduction solutions with LED lighting and take a full view of every aspect of energy usage in order to determine the very best method to save money and reduce carbon emissions. Part of being an LED installer, our electrical engineer’s design, choose and spec the correct type of fitting to meet your requirements. ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta DSV Venturi Steam Trap is designed for multipurpose applications from line drainage and trace heating, through to small to medium heat exchanger applications. The trap has a primary and secondary integrated strainer and a removable venturi insert. The body of the trap does not have to be removed from the line for maintenance purposes. Access to the insert and both primary and secondary ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS DPS Digestate Pasteurisation System has been specifically designed to meet the requirements of pasteurisation in the anaerobic digestion and renewable energy sectors. The DPS is capable of pasteurising digestate, feedstocks, sludge and similar materials and is suitable for both pre-and post-digestion pasteurisation, allowing operators to maximise the efficiency of their overall process ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- For recovering heat from flash steam from thermal water treatment - Heat recovery and thus efficiency improvement - Energy produced can be used for additional heating or for transfer to a separate water circuit Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The FC1500 Medical Capacitor Charging power supply, with a built in configurable ACDC power supply is designed to provide the system power needs for Medical laser applications. The FC1500 can provide both capacitor charging and ACDC low voltage system power due to it’s unique design and intelligent control. The FC1500 can be used as a standalone capacitor charger, and if needed, various low ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
As part of the Matthews Environmental Solutions fully inclusive service we can supply a range of coffin cold storage options to satisfy virtually all crematoria requirements. These include three or six coffin units, or we can provide bespoke units designed to suit different site facilities and needs. All units are available in a standard width or with oversized chambers to accommodate large ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The DSV-UC Venturi Steam Trap with floating universal connector has been specifically designed for trace heating and line drainage applications as well as small to medium heat exchanger applications. The two-bolt floating universal connector system is a permanent replacement venturi orifice steam trap that will fit onto any standard universal connector flange. With primary and secondary ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta SCi Venturi Steam Trap is designed for medium to large process applications including heat exchangers, reboilers, air heaters, etc. The Delta SCi has a removable venturi insert. A strainer can be fitted upstream of the trap. ...
-
PremiumManufactured by EnviTec Biogas AGbased in GERMANY
Whether as a source of electricity to generate heat locally, to supply heat by pipeline or to feed into the gas network after processing - Biogas is multi-talented and versatile. The weather-independent generation is a predictable source of revenue for the operator, since energy from biogas is not subject to any price fluctuations. At the same time, a biogas plant actively contributes to ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Latest Design for Efficient Cremation: Backed by over 30 years of combustion technology. Main burner positioned for direct flame contact to case. Rapid heat up and cool down cycles with low noise operation. Tile floor for ease and cost-effective replacement. Refractory lined for efficiency and ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta DSV25 Venturi Steam Trap is designed for multipurpose applications from line drainage and trace heating, through to medium to large process applications. The DSV25 has an integrated strainer and an in-line removable venturi insert. The body of the DSV25 does not have to be removed from the line for maintenance purposes. Access to the insert and strainers is through the top and bottom ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you