Energy Efficiency Equipment For Energy Management In Africa
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
As part of the Matthews Environmental Solutions fully inclusive service we can supply a range of coffin cold storage options to satisfy virtually all crematoria requirements. These include three or six coffin units, or we can provide bespoke units designed to suit different site facilities and needs. All units are available in a standard width or with oversized chambers to accommodate large ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
If you need electricity and thermal energy simultaneously, a cogeneration system may be your solution, and can offer a favorable return on investment. Cogeneration allows you to benefit from two or three forms of energy for the price of one, with minimal environmental impact. These systems can turn clean-burning natural gas into cost-effective, reliable electricity, use steam for production ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The DSV Venturi Steam Traps are designed for multipurpose applications from line drainage, trace heating, through to medium heat exchanger ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Latest Design for Efficient Cremation: Backed by over 30 years of combustion technology. Main burner positioned for direct flame contact to case. Rapid heat up and cool down cycles with low noise operation. Tile floor for ease and cost-effective replacement. Refractory lined for efficiency and ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
A gas turbine engine is a type of internal combustion engine. Essentially, the engine can be viewed as an energy conversion device that converts energy stored in the fuel to useful mechanical energy in the form of rotational power. The term “gas” refers to the ambient air that is taken into the engine and used as the working medium in the energy conversion ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta DSV25 Venturi Steam Trap is designed for multipurpose applications from line drainage and trace heating, through to medium to large process applications. The DSV25 has an integrated strainer and an in-line removable venturi insert. The body of the DSV25 does not have to be removed from the line for maintenance purposes. Access to the insert and strainers is through the top and bottom ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
The Polar-Pak Cooler is simple from beginning to end. A quick and easy install puts the cooler on your floor while taking up a minimal amount of space. Its quality design and energy efficiency will keep it running for years to come. The autoloader extends hearth life and offers a more professional presentation during witnessed cremation services. Available as an option with most human and animal ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta nHRi Venturi Steam Trap is designed for high-load process applications including heat exchangers, reboilers, BJSIFBUFST, etc. The nHRi has a removable insert. " strainer DBObe fitted upstream of the ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta SCi Venturi Steam Trap is designed for medium to large process applications including heat exchangers, reboilers, air heaters, etc. The Delta SCi has a removable venturi insert. A strainer can be fitted upstream of the trap. ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar's modular concept for gas turbine generator sets has been optimized for transportation and the scope has been minimized for civil works with our Power Generation Module (PGM). Good for non-hazardous applications only, our PGM solution results in shorter installation and commissioning times, and reduces overall costs for our ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta DSV Venturi Steam Trap is designed for multipurpose applications from line drainage and trace heating, through to small to medium heat exchanger applications. The trap has a primary and secondary integrated strainer and a removable venturi insert. The body of the trap does not have to be removed from the line for maintenance purposes. Access to the insert and both primary and secondary ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The DSV-UC Venturi Steam Trap with floating universal connector has been specifically designed for trace heating and line drainage applications as well as small to medium heat exchanger applications. The two-bolt floating universal connector system is a permanent replacement venturi orifice steam trap that will fit onto any standard universal connector flange. With primary and secondary ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market leader, as AERZEN has ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Trigeneration or combined cooling, heat and power (CCHP), is the process by which some of the heat produced by a cogeneration plant is used to generate chilled water for air conditioning or refrigeration. An absorption chiller is linked to the combined heat and power (CHP) to provide this functionality. Quadgeneration takes this process one step further with the addition of systems to ...
-
Manufactured by Aircosaver- by EPV Electronics GmbHbased in GERMANY
Connect the motion signal of the sensor (BM) with one of the digital inputs I1 to I8. The output of the occupancy sensor is designed as a ...
-
Manufactured by Aircosaver- by EPV Electronics GmbHbased in GERMANY
Occupancy sensing only (ON/OFF) available in two versions. The ecos PM/230V is the ideal sensor for applications without any daylight and applications where you want artificial light even if you have day light available. Up to 12 meter installation ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The GPC general purpose chamber furnaces are large floor-standing models. Available at 1200 °C and 1300 °C with capacities ranging from 131 to 350 litres. The following models have been renamed CWF: GPC 12/36, GPC 13/36, GPC 12/65 & GPC ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national electricity grid and a gas boiler for onsite heating. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you