Energy Management Applications
-
Premium
Power generation solutions for institutional sector
Solar serves the institutional industries with a variety of gas turbine and energy solutions, including: Combined Heat and Power (CHP), Base-load Electricity, Distributed Power, Combined Cycle, Peak Shaving, District Heating/Cooling, Mobile Power, Standby ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
-
Premium
Industrial gas turbines for power generation solutions
Gas Turbine Power Generation ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
-
Photovoltaic Plant Monitoring
By Nethix S.r.l. based in Castelfranco Veneto (TV), ITALY.
-
Industrial vacuuming for power generating plants
By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).
-
Primary air control for coal-fired power plants
Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high vibration, temperatures up to 750° F and dirty 'Fly Ash' laden ...
By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Filtration systems & solutions for nuclear industry
Within the nuclear industry there are ongoing operational challenges and potential hazards associated with environmental emissions and the protection of the workforce, such as high temperatures, high radioactivity, high solids loads and chemically aggressive environments. Therefore the industry demands exceptional levels of technical expertise and quality, in conjunction with specific skills to solve many of its most intractable ...
By Porvair - Filtration Group based in Fareham, UNITED KINGDOM.
-
Ammonit Solar Resource Assessment Systems
In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the ...
By Ammonit Measurement GmbH based in Berlin, GERMANY.
-
Power generation solutions for boiler tubes and walls sector
Superior tube protection: For decades, Castolin Eutectic has been the provider of choice for service, repair and preventive maintenance of heavy-duty and industrial process equipment. In power generation, protecting your industrial process equipment, boilers, tubes and walls from future corrosion and erosion, while also extending your tubes’ useful life is vital to your operation’s bottom line. With LaserClad, you can experience more reliability and better across-the-board performance with a new, ...
By Castolin Eutectic GmbH based in Kriftel, GERMANY.
-
Measurement solution for hydrogen fuel cell testing
As the alternatives to fossil fuels for power generation and automotive power become more widespread and preferred, so has increased the research and testing of hydrogen gas in fuel cells. The hydrogen (H2) gas used in fuel cell has to be free of impurities in order to make the fuel cell as efficient as possible and so quality thresholds have been set in legislation. Such legislation as SAE J2719 provides hydrogen fuel quality standards for proton exchange membrane (PEM) fuel cell vehicles. If impurities above ...
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Industrial Solution for incineration & thermal treatment
Waste incineration, including solid municipal and hazardous waste, biomedical waste and hazardous liquid are all continually under more stringent scrutiny by regulators. Macrotek has designed and supplied many integrated systems to meet most guidelines. In several installations, hazardous waste has been combined with radioactive waste, requiring nearly non-detectable emission levels for many of the contaminants. Macrotek has installed and tested systems for these processes with the results significantly better ...
By Macrotek Inc. based in Markham, ONTARIO (CANADA).
-
Measurement and control systems for the Indicating the level - mechanically
Depending on the regulations, a steam boiler must be equipped with one or more direct and/ or indirect level gauges. With direct level gauges, the liquid level can be seen directly through a glass or mica window. The use of a transparent level gauge with background illumination gives operating staff a clear separation between the water and steam zones even when viewed at a relatively long distance. Bicolour level gauges (black and white or green and red) are very suitable for camera transmission to the measuring ...
By IGEMA GmbH based in Münster, GERMANY.
-
Measurement and control systems for the controlling the level - electronically
Discontinuous control is used mainly in smaller steam boilers with low output since the temperature fluctuations in the boiler are fairly great as a result of irregular refilling with water. Continuous control, on the other hand, permits still more economical steam generation with high ...
By IGEMA GmbH based in Münster, GERMANY.
-
Analytical instruments for thermal analysis
A variety of thermal analysis techniques, such as Thermo Gravimetric Analysis (TGA), Differential Thermal Analysis (DTA) and Differential Scanning Calorimetry (DSC) rely on high-performance mass flow ...
By Axetris AG based in Kaegiswil, SWITZERLAND.
-
Heat transfer products solutions for the power generation industry
Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid ...
By Evapco Inc. based in Westminster, MARYLAND (USA).
-
High-tech energy solution for the solar panel manufacturing industry
The solar panel manufacturing industry includes owners and operators of solar-power-generating facilities in the form of either photovoltaic panels or solar thermal power stations that make use of mirrors or lenses to concentrate the sun's energy. Operators then sell the energy to downstream customers. These businesses require systems and solutions to meet their photovoltaic panel manufacturing process emissions and pollution control challenges, including volatile organic compound (VOC) abatement; and acid gas ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Industrial power solutions for the coal-fired sector
Without controls, the combustion of solid fuel (coal) to generate power results in the emission of carbon dioxide (CO2), sulfur dioxides (SO2), nitrogen oxides (NOx), particulate matter, mercury, lead, cadmium, carbon monoxide, volatile organic compounds (VOCs), and arsenic. This is why it is critically important for solid fuel power plants to comply with stringent environmental standards by utilizing the optimal technologies for emissions management, environmental air pollution control, and fluid handling and ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Cellulosic Technology for General Biomass and Global Warming
General Biomass Company was founded in 1998 to do something about global warming. Since our founding, the General Biomass web site has carried information on global warming as a public service. This will now be focused on potential technology solutions and public policy. General Biomass needs and welcomes support from investors, partners and applicants to develop our own ability to contribute to solutions. Our area of expertise is cellulosic technology to make glucose and xylose from biomass. Glucose from ...
By General Biomass Company based in Evanston, ILLINOIS (USA).
-
Diesel Fuel Flow Meters
Diesel Fuel flow meters are digital flow meters for liquid fuel consumption measurement. Most widely used types are mechanical and digital inline fuel meters. Differential flow sensors are avilable. Like: the turbine, positive displacement (oval gear), ...
By Sino-Inst based in Xian, CHINA.
-
Hydrogen gas solutions for grid balancing sector
Decarbonising the production of hydrogen, enabling a green transport fuel for trains. The ongoing trend to deploy more renewable power sources is a positive step towards reducing dependency on fossil fuels, but it causes some big issues for electricity grid operators. Balancing the grid is becoming more challenging, because renewables are increasing the temporal mismatch between supply and demand on all timescales. Conventional grid balancing techniques cause CO2 emissions (ramping up a gas or coal power plant), ...
By ITM Power based in Sheffield, UNITED KINGDOM.
-
Automatic fire detection and suppression solutions for wind turbine industry
Ensure your power generation equipment is protected from the dangers of flammable oils, hydraulic fluids, and short-circuits. Unlike buildings or industrial equipment, wind turbines can be very difficult to protect with traditional fire safety systems. Because wind turbines operate remotely, fires can go undetected. That means a fire extinguisher is not a viable option. Sprinkler systems don't make sense either, because they require a water source. Wind turbine fire suppression systems from Firetrace provide a ...
By Firetrace International LLC based in Scottsdale, ARIZONA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you