GE Energy Management Equipment For Energy Management
-
based in USA
Designed for IEC Wind Class IIIs, GE’s 2.75-120 wind turbine features a 120-meter rotor in combination with the proven single-blade pitch control. The 2.75-120 offers the latest enhancements in load management controls, low acoustic emissions, efficient electrical power conversion and robust ...
-
based in USA
GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 ...
-
based in USA
Introducing the J920 FleXtra Jenbacher with 49% el. efficiency 60Hz. GE proudly announces the J920 FleXtra Jenbacher 9.5 MW system for 60 Hz with best-in-class 49% el. efficiency for large gas engine power plants at APPA, Denver on June 16th. Whether you're seeking full power at high efficiency levels or a unit capable of short start-up times. GE's J920 FleXtra gas engine is an ideal, reliable ...
-
based in USA
GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output at rated wind speed compared to the 1.85-87 turbine, ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
-
based in USA
GE’s 1.7-100/103 wind turbine offers a 47% increase in swept area when compared to GE’s 1.6-82.5 turbine, resulting in a 24% increase in Annual Energy Production (AEP) at 7.5 m/s. This increase in blade swept area allows greater energy capture and improved project economics for wind developers. The 1.7-100/103 uses GE’s proprietary 48.7-meter blade which has the same proven ...
-
Manufactured by GE Powerbased in USA
Our air-cooled generator systems install fast, integrate easily, and deliver the power needed with more uptime. These generators are the choice for power plant applications that demand simple, flexible operation. Prepackaged generator solutions arrive ready-to-install at site reducing project cycle time with increased ...
-
based in USA
The result of continuous enhancements and extensive experience, GE's Jenbacher Type 6 gas engines are an advanced and reliable addition to our product line. Serving the 1.5 to 4.4 MW power range, the 1,500-rpm engine speed results in a high power density and low installation costs. In addition, the Type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and ...
-
Manufactured by GE Powerbased in USA
GE integrates technology, experience, and people to deliver the highest-value simple-cycle and combined-cycle power plants anywhere in the world. This value comes from technologies that provide the lowest lifecycle cost of converting fuel into ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable power at lower fuel cost, extended equipment life and smaller ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Clarke Energy recognised the requirements for a ‘power module’ based around the GE Jenbacher Type-6 engine. The power module scope which comprises of engine, enclosure, silencer cooling system and other key ancillary components has been optimised for the requirements of the Australian coal gas and remote power ...
-
based in USA
GE’s electric propulsion systems on-board electric power supplies and networks, energy management, automation, control, dynamic positioning and digital technologies work together seamlessly to supply a ship’s full power requirements, including energy-efficient propulsion, service loads and energy-intense operating ...
-
Distributed by ap+mbased in USA
ap+m supplies parts and services for many types of GE aeroderivative gas turbines. Below are some of the more commonly used engine types. The GE LM2500 is the workhorse of aeroderivative gas turbines, with more than 1,500 units in service and over 22 million operating hours with a variety of fuels and fuel/water combinations. Availability for the GE LM2500 is an outstanding 99.6%, requiring just ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you