Energy Projects Articles

  • Stand-alone project in Argentina - Case Study

    With great success, Viking Wind has delivered wind turbines for a stand-alone project in Chorriaca in Argentine. The purpose of the project is to supply vital and renewable energy to Patagonia, which is the southernmost and isolated region in Argentine. Today the three Viking wind turbines deliver energy to a hybrid solution, which supplies electricity to the small village Chorriaca, ...


    By Viking Wind ApS

  • Bull Creek Wind Project - Case Study

    422,472 MWh: Low Emission Contribution 29MW: Generation Capacity 17: Turbines installed Bull Creek Wind Project, in western Alberta, represents the first of Windlab’s projects to reach operations in North America. ...


    By Windlab Systems Pty Ltd.

  • Coonooer Bridge Wind Farm - Case Study

    255,672 MWh: Low Emission Contribution 20MW: Generation Capacity 6: Turbines installed A$50M: Project Cost The Coonooer Bridge Wind Farm is a small wind energy project located 90 km north-west of Bendigo, Victoria. The site represents the competitive ...


    By Windlab Systems Pty Ltd.

  • Coopers Gap Wind Farm - Case Study

    A$850M: Project Cost 1,510,000MWh:  Expected low Emission Contribution 123: Turbines installed 453MW: Generation capacity Coopers Gap Wind Farm is a 453MW wind energy project to be located at Cooranga North, approximately 180kms north-west of Brisbane, Queensland. Upon completion in 2019, ...


    By Windlab Systems Pty Ltd.

  • The world`s first ski area powered by renewables Berkshire East Case Study

    Berkshire East, in Charlemont, MA, is the world’s first ski area to be powered entirely by on-site renewables.  With concerns over climate change and the high costs associated with their snow-making equipment, ...


    By AllEarth Renewables

  • St. Cloud Wastewater Install Biogas and Natural Gas Engine, USA - Case Study

    In 2016, St. Cloud Wastewater Treatment Facility selected Jenbacheras the blended biogas and natural gas engine of choice for their new renewable energy plant. For most cities, wastewater and drinking water treatment plants are ...


    By Clarke Energy

  • Orbost Gas Plant Upgrade, Australia - Case Study

    Clarke Energy has been engaged by APA Group to provide engineering design and supply of four of GE’s high efficiency Jenbacher 420 1.498 MWe containerised gas engines for the Orbost Gas Plant upgrade in Victoria, ...


    By Clarke Energy

  • CHP Goes Green Project - Case Study

    The driving forces seen behind the project “CHP goes Green” are on the one hand the limited energy resources in general, as well as the limitation of biomass resources, and on the other hand the need to increase the use of renewable energy resources in the conventional heat supply as well as to increase the share of heat supplied by cogeneration. The advantage of the use of biomass in ...


    By COGEN Europe

  • Commonwealth Charter Academy - Case Study

    Location:Harrisburg, PA Project Size:500,000 kWh Solar Renewable Energy LLC installed EcoFoot5D 5-Degree Racking system on the flat-roof portion of this 1,080 solar panel project on Commonwealth Charter Academy's (CCA) roof . The total system will produce approximately 500,000 kWh annually, which will provide one-third of the electricity consumption at ...


    By Ecolibrium Solar

  • Sohnen - Case Study

    Location:Tijuana, Baja California, Mexico Project Size:500kW E-solutions Energy installed 1,612 solar panels using EcoFoot2+ 10-Degree Racking Solution on the Sohnen building in Tijuana, Baja California, Mexico. Four hundred APSystems microinverters also installed, which is thought to be the largest microinverter installation in ...


    By Ecolibrium Solar

  • UA Tech Park in Tucson, AZ - Utility-Scale Ground-Mounted Projects - Case Study

    Experience – Hit the ground running Only a few weeks before year-end 2011, VISSOLIS was approached by the PV module manufacturer Astronergy to save a stalled project. It was developed by an unrelated party and was in danger of being cancelled because of the lack of fi nancing, expiration of the Power Purchase Agreement and the termination of the land lease. Within only a few weeks, ...


    By Vissolis, Inc.

  • Oak Ridge Solar Park, TN - Ground-Mounted Tracker Projects - Case Study

    The dual-axis-tracker project in the Oak Ridge Heritage Center is part of the worldwide “dena Solar Roofs Program” coordinated by Deutsche Energie-Agentur GmbH (dena) - the German Energy Agency - and co-financed by the German Federal Ministry of Economics and Technology (BMWi) within the initiative „renewables – Made in Germany“. ...


    By Vissolis, Inc.

  • Zayed Sustainability Prize Oceania Finalist – Tension Woods College Case Study

    The Zayed Sustainability Prize is the UAE’s pioneering global award in sustainability recognising the achievements of those who are driving impactful, innovative and inspiring sustainability solutions across five distinct categories: Health, Food, Energy, Water and Global High Schools. A number of Australian and New Zealand schools have become Oceania finalists and winners in the ...

  • Aloha Solar Case Study

    Altus Power America acquired a Tier 3 Feed-In Tariff (FIT) project and needed to have it rapidly built to meet the deadline for the power purchase agreement’s guaranteed completion date. The project included upgrading a substation. REC Solar built the entire 5 MW (AC) system plus substation in 5 months. The energy from the project is being purchased by Hawaiian Electric Company (HECO) on a ...


    By REC Solar

  • Redwood City School District Case Study

    The Redwood City School District’s goals were to reduce operating costs and implement sustainable operating practices. The District developed an energy development strategy with Sage Renewables energy consultants and obtained Proposition 39 funding through the state of California to help fund the project. The usual benefits for renewable energy generation were identified, as well as a need ...


    By REC Solar

  • TOWERPOWER - Case Study

    Objective: TOWERPOWER was focused on the development of a real-time remote monitoring system to diagnose the aging of the metal structure of offshore turbines. The ultimate goal was to reduce maintenance costs in offshore wind energy. ...

  • Forecasting Exercise - Case Study

    Objective: In 2005, AEE promoted a project related to the prediction of wind farm energy production, known as the Prediction Exercise. The project was financed by AEE and by companies that own the parks, as well as by a subsidy from the PROFIT programme of the ...

  • 52 kW Fastrack Ballasted Mounting System Madison, WI Case Study

    Sollega supplied their FastRack ballasted mounting system to H&H Solar for the installation of a 51.8 kW Alliant Energy Madison headquarters rooftop project, WI. H&H Solar has supported Alliant Energy on a research project at its Madison headquarters. The main goal of the project is to compare solar panels and the efficiency of different solar energy systems. ...


    By Sollega, Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you