Only show results in Michigan? Ok

Energy Projects equipment for Energy Management

  • Premium

    Anguil - Industrial Energy & Heat Recovery Solutions

    Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Other Product line

  • Northwind - Model 100 - Wind Turbine

    The Northwind 100 wind turbine gives economical, reliable power to grid connected systems all over the world.  Rated at 100 kW the Northwind 100 utilises the best technology available today, incorporating a permanent magnet generator and gearless design, maximizing the return on investment on small to medium sized wind energy projects.

    By Altergen Ltd. based in Shrewsbury, UNITED KINGDOM. from Wind Turbine Product line

  • Caernarfon - Model 8-18kW - Air Source Heat Pump

    The variable out put of the Caernarfon 8-18kW air source heat pump offers complete heating and domestic hot water solutions for even the largest new build properties. With run costs savings of up to 70% and the Renewable Heat Incentive available to self-builders, the Caernarfon is an ideal solution for new builds. Able to offer full heating and ...

    By Global Energy Systems and Technology Limited based in Lytham, UNITED KINGDOM.

  • Stokvis - Model Bare Plate - Heat Exchanger

    Compact Brazed plate heat Exchangers are one of the most efficient ways to transfer heat. They are designed to provide unparalleled performance with very low life-cycle cost. Choosing brazed technology for heating or cooling projects will bring many benefits, including savings in space, energy, and maintenance. Our CBEs are extremely compact ...

    By Stokvis Energy Systems based in Surrey, UNITED KINGDOM. from Heating Systems Product line

  • SolarReserve - Molten Salt Tower Receiver

    Inert and non-toxic molten salt flows within the thin-walled tubes of the proprietary receiver at a rate of more than 5,800 gallons per minute and absorbs the concentrated sunlight directed at it in the form of heat energy. The liquid salt is heated from 550°F (288°C) to over 1050°F (566°C). Unlike water that flashes into steam at ...

    By SolarReserve, LLC. based in Santa Monica, CALIFORNIA (USA).

  • Opvius - BIPV Tool

    OPVIUS is a company that manufactures customized OVP modules for individual projects, which should be understood as semi-finished goods. Together with our partner companies those semi-finished goods are integrated into the construction material of choice to form a multi-functional material to be used for integrated energy harvesting surfaces in ...

    By Opvius GmbH based in Kitzingen, GERMANY.

  • DigiSure - Enterprise Level Energy Management Software

    Put simply DigiSure is Enterprise level Energy Management Software. A secure, cloud based platform that collates all of your energy related data and provides you with a comprehensive set of applications to improve the effective management of your estate, whilst reducing consumption through projects with complete transparency. The hierarchy gives ...

    By MWA Technology based in Birmingham, UNITED KINGDOM.

  • Cooling & DH of Gas Coolers

    In biomass plants with high efficiency are there two types of gas coolers: A high temperature cooler which cool the flue gas from app 950 C to app 150c. A low temperature condensating cooler which cool the gas to 30-40C.

    By Dall Energy based in Hørsholm, DENMARK.

  • ZephIR - Model 300 - Onshore Wind LiDAR

    ZephIR 300: Hub height wind measurements reduce the risk of, and increase the value of onshore wind energy projects. Onshore wind lidar measurements typically deliver a £320,000 increase on the value of a project through more accurate Annual Energy Prediction (AEP) when compared to a 80m met mast on a 20 MW onshore wind farm – The ...

    By ZX Lidars based in Herefordshire, UNITED KINGDOM.

  • Wind Energy

    The purpose of the CENER Wind Energy Department is to develop applied research activities and give technical advice in the field of wind energy, providing a service for all the sector players, such as: developers, manufacturers, certification authorities, financial institutions, users, associations and administrative bodies, both at home and ...

    By National Renewable Energy Centre (CENER) based in Sarriguren, SPAIN.

  • Carnegie - Model CETO - Commercial Scale Unit

    The CETO 6 design builds on the experience gained in all previous CETO generations and incorporates some important improvements. The diameter of the buoyant actuator has the most significant influence on power output and has been increased to approximately 20m from the 7m diameter 80kW unit successfully tested at the Garden Island site in 2011 and ...

    By Carnegie Wave Energy Limited (CWE) based in West Perth, AUSTRALIA. from Wave Product line

  • TEDOM - CHP Modules

    For technically skilled investors who are able to ensure some parts of cogeneration technology by themselves, we have prepared series of CHP modules for natural gas with output ranging from 500 kWe to 10 MWe. If you have the experience with larger energy projects and the desire to build a CHP unit by yourself, then the CHP modules are the solution ...

    By TEDOM a.s. based in Výčapy, CZECH REPUBLIC.

  • Track Record Services

    With well over 100 CDM projects to date, Climate Bridge has built one of the largest CER portfolios in the world. This represents emission reductions in excess of 80 million tonnes of CO2e.

    By Climate Bridge based in London, UNITED KINGDOM. from Compliance Carbon Product line

  • Precision-Paragon - Model HBN - Economy 12` Partial Cutoff High-Bay

    The HBN is a versatile 12” partial cutoff hi-bay with a rugged, effective and economical design.

    By Precision Paragon (P2) based in Yorba Linda, CALIFORNIA (USA). from Industrial Product line

  • Flex Turbine - Model GT1300S - Heat Exchangers

    Integrating four (4) Flex Turbine GT333S into a single ISO container, the Flex Turbine® GT1300S provides a cost-effective energy solution for larger capacity energy projects. The Flex Turbine® GT1300S keeps the Flex Turbine® broad fuel flexibility, machine durability, and efficient full to part-power efficiency. Built-in redundancy ...

    By FlexEnergy Inc based in Portsmouth, NEW HAMPSHIRE (USA).

  • Energy Efficency Services

    In current climate where diverse range of energy challenges face the industry, we assist our clients in process optimisation, selection of efficient equipment, better performance of existing assets and reduction in carbon footprint.

    By Powerplant Engineering Services (PES) based in Kenmore, AUSTRALIA.

  • NGE - Photovoltaic (PV) System

    Photovoltaic systems play a huge role in bringing clean, affordable energy to people across the world. We are constantly seeking out ways to adapt and use PV in new and innovative ways. Next Generation Energy custom designs and engineers turnkey PV solutions for projects ranging in scope from residential to commercial to utility grade. We work ...

    By Next Generation Energy based in Lafayette, COLORADO (USA). from Custom Engineered Solurions Product line

  • Model V136-4.2 MW - Medium Wind Turbines

    The V136-4.2 MW is designed for medium wind sites. It boosts performance by 11 percent compared to V136-3.45 MW and reaches a class leading 103.9 dB(A) max sound power level, enabling permitting and realisation of wind projects in sound critical areas.

    By Vestas Wind Systems A/S based in Aarhus N, DENMARK.

  • Model V136-3.45 MW - Wind Turbines

    V136-3.45 MW combines Vestas' most advanced aerofoil design to date with the proven 4 MW nacelle and Large Diameter Steel Tower (LDST) technology, to deliver high and efficient energy production in low- and medium-wind conditions. The aerofoil design, applied to the 66.7m long blades, enables a 16 percent* increase in annual energy production ...

    By Vestas Wind Systems A/S based in Aarhus N, DENMARK.

  • ITAS - Dry Charge Battery Oven

    The inert-atmosphere drying oven is designed for the simultaneous drying of both negative and positive plates of batteries, for automotive and industrial applications.  Fives provides compact and turn-key dry charge battery ovens combining optimized productivity, simplicity to load, and adapting to any plate dimensions. ITAS dry charge ...

    By Fives Group based in Paris, FRANCE. from Burners Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you