Only show results in Massachusetts? Ok

Energy Recovery equipment for Energy Management

  • Premium

    Munters Thermo-T - Welded Tubular Heat Exchanger

    The Thermo-T tubular heat-exchanger is designed to recover heat from energy-consuming processes up to 2000°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating. Thermo-T offers fully adjustable tube-size and tube-spacing as well as both single-pass and multi-pass ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    GIG Karasek - Model MVR - Mechanical Vapour Recompression

    In the mechanical vapor recompression, the vapors are compressed by an electrically operated compressor and used again to heat the evaporator. Depending on the application (boiling point increase, heat transfer), one- or two-stage turbo-ventilators or turbo-compressors are used as heat pumps.

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA. from Evaporation Technology Product line

  • Premium

    Transvit - Industrial / Biomass Plant

    HIGH VOLUME BIO-WASTE disposal with large chambers. Capacities from 50 to 1500 tons per day with low ash material (ie wood waste). Up to 200 tpd with high ash material (ie MSW garbage). Wall panel construction allows convenient shipment and erection anywhere in the world. This design also provides for easy and rapid repair and on-site maintenance. ...

    By Transvit Incorporated (TVI) based in Salt Lake City, UTAH (USA). from Waste to Energy Product line

  • Premium

    Transvit - Practical Waste Gasification and Energy Recovery Systems

    The focus of TRANSVIT is to provide low cost, practical waste gasification and energy recovery systems for the disposal of municipal and industrial solid waste.  The municipal waste-to-energy systems feature expandable modules, each processing up to 400 tpd of waste, and generating up to 8 mega watts of electric power. We also provide larger ...

    By Transvit Incorporated (TVI) based in Salt Lake City, UTAH (USA). from Waste to Energy Product line

  • Premium

    Munters Des Champs - Heat Exchangers and Energy Recovery Wheels

    Des Champs heat exchangers offer designs utilizing plate counterflow heat exchangers, heat pipe, and energy recovery wheels. These heat exchangers form the backbone of many system configurations and can be configured with unique traversing frost prevention. Des Champs heat exchangers have been used everywhere from the hottest climates to ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    KAHL - Straw Pelleting Plants

    Pelleting of renewable raw materials for energy recovery has been a topic for KAHL for more than 30 years. Straw and dried forage pelleting plants have also been part of our product range since the beginning. So, we can rely on long-standing experience.

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Biomass Industry Product line

  • Premium

    ERG - Energy Recovery from Waste Systems

    Recovering energy from waste is a great way to address the problem of how to dispose of waste which cannot be recycled of composted, whilst at the same time reducing operating costs. Despite recent oil price trends, energy continues to be a significant input for industry. It is almost a certainty that the cost of waste disposal will continue to ...

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM. from Thermal Systems Product line

  • Premium

    Transvit - Waste-to-Energy (WTE) Plant

    A waste-to-energy (WTE) plant is constructed in TWO (2) Phases: Phase 1 is elimination of the waste by gasification (incineration). This Phase 1 represents 10% to 15% of the full Waste-to-Energy plant cost. With normal tipping fees it is quickly paid for and profitable. Phase 2 is the energy recovery and electricity generation, and this can be ...

    By Transvit Incorporated (TVI) based in Salt Lake City, UTAH (USA). from Phase 1 Product line

  • Premium

    Dutch Incinerators - Electricity for Waste Heat Recovery

    Electrical power generation by an Organic Rankine Cycle (ORC). An ORC converts recovered waste heat to combined heat and power (CHP), where steam based energy recovery is not practically feasible, specifically for energy recovery at lower flue gas temperatures and smaller thermal input capacities. Power generation by a steam turbine, specifically ...

    By Dutch Incinerators BV based in Sint Jansteen, NETHERLANDS. from Waste Heat Recovery Product line

  • Premium

    Transvit - Batch Gasifier for Smaller Cities

    This BATCH design is perfect for smaller applications. Each 10 ton chamber of this BATCH system is loaded full once per day, a 30 minute process. Thereafter, the chamber operates unattended and without disturbance of the waste pile for 23 hours. Emissions and ash quality are the best in the world. The white ash color shows close to 100% complete ...

    By Transvit Incorporated (TVI) based in Salt Lake City, UTAH (USA). from Smaller Cities Product line

  • Premium

    Dutch Incinerators - Utility Steam for Other Production Processes

    General energy supply as utility steam for other production processes. Hot water production. Direct and indirect process heating. Atomization, to maximize combustion efficiency. Drying purposes. Cleaning applications. Power generation through a steam turbine or engine.

    By Dutch Incinerators BV based in Sint Jansteen, NETHERLANDS. from Waste Heat Recovery Product line

  • Premium

    GIG Karasek - Model TVR - Thermal Vapour Recompression System

    The thermal vapor recompression (TVR) builds on the same principle as the mechanical alternative, but uses only a portion of the resulting vapor for heating the system. The compression of the steam for heat recovery takes place in a steam jet pump. This is usually designed for a specific operating point and works on the jet pump principle. A ...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA. from Evaporation Technology Product line

  • Premium

    Anguil - Industrial Energy & Heat Recovery Solutions

    Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Other Product line

  • Premium

    Munters Thermo-Z - Welded Plate Heat Exchanger

    The Thermo-Z plate style heat exchanger is designed to recover heat from energy consuming processes up to 1500°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating. Thermo-Z offers fully adjustable plate thickness and spacing as well as multiple flow patterns.  ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • FEDCO - Model HP-HEMI - Hydraulic Energy Management Integration Turbocharger

    The HEMI is a motor assisted HPB. The HEMI provides control of feed and brine flows in SWRO while the primary feed pump runs at constant speed and pressure. What the HEMI does: Provides exceptional energy recovery efficiency. Eliminates the VFD on the High-Pressure Pump. Computational Fluid Dynamics analysis optimizes every HP-HEMI for peak ...

    By Fluid Equipment Development Company (FEDCO) based in Monroe, MICHIGAN (USA). from Turbochargers Product line

  • Micro Regen - Microregen Turbines

    Microregen turbines allow you to recover energy from excess pressure where it does not exceed 25kW of usable electrical power. The turbines can be installed directly in-line on existing pipes and work under variable hydraulic conditions.

    By Tecnoturbines S.L based in Almoradí (Alicante), SPAIN. from Grid-connected Turbines Product line

  • Compte-R - Model CESYS - Condenser

    The condenser makes it possible to recover energy from the fumes in order to increase the overall efficiency of the installation. It is placed downstream of the filtration system before the chimney. Compatible with any type of boiler and a fuel with a moisture more than 40%, this equipment guarantees the efficiency over 100% on LHV.

    By Compte.R based in Arlanc, FRANCE. from Energy Efficiency Product line

  • RD-Grup - Model CEO Lines EV130 - Heat/Energy Recovery Ventillation Units

    Air flow rate up to 200m3/h. Heat  recovery more than 90%through   enthalpy  type  (cellulose based)  heat exchanger element. EC motor & plug fan/ AC motor& plug fan. Free  cooling. Enthalpy type (cellulose based) heat exchanger element.. Latent & sensible  heat transfer. Removable heat exchanger ...

    By RD Grup based in Kısıkköy, Menderes, TURKEY. from Heat/Energy Recovery Ventillation Units Product line

  • RD Grup - Model CEO Lines HS - Heat/Energy Recovery Ventillation Units

    Air volume flow rate between 500-4000m3/h. 120-160 Pa External pressure. Cross Flow & Counter Cross Flow Polymer heat exchanger. AC/EC motor-Direct Drive  Radial  Fan. 3 speed. Front service door. Removable heat exchanger &G4 filter. Advanced controll unit & Cable connected remote contoller.

    By RD Grup based in Kısıkköy, Menderes, TURKEY. from Heat/Energy Recovery Ventillation Units Product line

  • Ariterm BioComp - Model 40kW – 300kW - Biomass Boilers

    The BioComp series is a new generation automatic bio heating boiler for use with wood pellets. The fire chamber of the BioComp boiler has been designed with a new round structure which improves heat recovery and energy efficiency.

    By Ariterm based in Kalmar, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you