Flares Applications

By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA).

It is a frequently asked question in the environmental sector, as the level of contamination in most cases is substantial and the cost of sustainable and reliable remediation solutions is often quite high. These high costs are mainly caused by high transportation costs to move the soil to a remediation facility (there are examples of transport over thousands of kilometres, just to get it into a landfill (!)…), and the costs of mobilisation of equipment and human resources to the site. Remediating your soil...

By Haemers Technologies SA based in Brussels, BELGIUM.

meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of...

By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

Flared gases and NGLs can be re-purposed as fuel for flex-fuel, low-emissions LPP Combustion Power Systems, lowering production costs, reducing logistical burdens, and addressing Gas Capture Plan and other compliance issues with flaring and emissions. The ‘Lean, Pre-mixed, Pre-vaporized’ (LPP) equipment enables clean combustion of liquid fuels in gas turbines and industrial boilers and burners. In addition to flare-gas NGLs, the LPP Combustion Oilfield Power System also operates on a variety of...

By LPP Combustion, LLC based in Columbia, MARYLAND (USA).

By AEREON based in Austin, TEXAS (USA).