Biogas Flare (Flares) Equipment In Europe
-
based in THAILAND
All anaerobic plants must be equipped with a biogas flare, for safety reasons. GWE flares are designed to operate at low to medium pressure (<50 mbar), without the need for a biogas fan and for continuous burning in a wide range of biogas flows (5-100 %). This avoids the need for biogas ...
-
Manufactured by Hofstetter Gastechnik AGbased in SWITZERLAND
For any situation, in which biogas cannot be utilized, our medium temperature flares are the ultimate solution for reliable and save gas disposal. Our medium temperature flare is the ideal solution for typical biogas with methane concentrations of 60 – 75%. Its operation is completely automatic. The flare ...
-
Manufactured by Gastreatment Services (GTS)based in NETHERLANDS
Most often they try to utilize biogas in various applications such as (bio) gas engines for the production of electricity and heat (CHP), hot water / steam boilers for supplying heat to business processes, biogas processing plants that process the biogas into green gas that is suitable for injection into the natural gas network or for ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE ...
-
Manufactured by LAMBDA Gesellschaft für Gastechnik mbHbased in GERMANY
The LAMBDA biogas and sludge gas flare serves as an inspection and safety device at biogas and sludge gas plants for the thermal treatment of excess gas. Since the continuous process of gas production in these plants can only be influenced to a slight extent in the event of a failure of the utilisation plant, the LAMBDA flare ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
The FAII biogas flare is an automatic, enclosed gas flare for combustion of biogas and other combustible gases, fully complying with the widely applied German air pollution regulation TA Luft. +500 references in more than 50 countries witness the robustness of our FAII flares! Available in a rage of 20 - ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
The FAI is an open-combustion flare, which can be configured in manual ignition as standard. Optionally, the FAI can be updated to Automatic mode, before or after* purchasing. That makes the New FAI the best and most cost-effective option for locations where no automatic flare is mandatory and open combustion is allowed! Available up to 500 ...
-
Manufactured by PBS Power Equipment, s.r.o.based in CZECH REPUBLIC
Automatic gas burners of the series APH-M guarantee the burning, while burning low-pressure and medium-pressure propane, propane-butane, biogas, sewage and degasation gas. Burners comply with technical requirements ČSN EN 676, ČSN 07 5801; consequently, they can be used for broad spectrum of burning and technological equipment. ...
-
Manufactured by Hofstetter BVbased in NETHERLANDS
Customised HOFGAS-IFL4c biogas gas flaring system is deployed when express regulations on gas emission must be observed. Because of no visible flame, erection of the gas flare is most advantageous even near residential areas. The system is simple to operate and adjust, and starts reliably. The high temperature flare for ...
-
Manufactured by C-deg environmental engineering GmbHbased in GERMANY
Biogas and landfill gas originates from bacterial degradation of organic substance, producing methane as an oxidizable component. These gases therefore show similar combustion behavior. Biogas usually has a higher methane concentration than landfill gas, but the remainder is almost solely the quenching gas carbon dioxide, which has an ...
-
based in UNITED KINGDOM
The VAB range of flares is used for the thermal oxidation of odorous off-gasses, specifically those produced by the re-generation of siloxane filtering systems. The VAB is highly effective and practically eliminates nuisance odours using a small flow of the source biogas as a fuel. The plant functions automatically and is normally ...
-
based in UNITED KINGDOM
The LG range of flares is used for combined biogas de-gassing and utilisation applications, typically used with anaerobic digestion plant, synthetic (pyrolysis) gas plant and for landfill gas environmental control. They include systems for delivering gas at controlled pressure for power generation. That portion of extracted gas which is not ...
-
based in UNITED KINGDOM
This range of simple elevated flares is typically used for short term applications (such as gas pumping trials) or those where exhaust gas emissions are not subject to regulation. The combustion process is visible and the combustion temperature is not ...
-
based in UNITED KINGDOM
The LD range of flares is used for biogas de-gassing applications, typically used with anaerobic digestion plant, synthetic (pyrolysis) gas plant and for landfill gas environmental control. The extracted gas is burnt in an enclosed flare stack in a controlled combustion process which, when required, ensures compliance with the UK ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
The HT series flares are designed to offer a combustion temperature above 1000 °C and residency time longer than 0,3 s. This is to comply with the widely-applied German norm TA-Luft, in those case in which the flare is not just an emergency element, as well as in case of landfills and other complex and special gases. The HT features ...
-
Manufactured by Conveco Srlbased in ITALY
HT-E series consist of enclosed ground flares specifically developed for installation in biomass plants where biogas combustion at full-flow is not expected to be required continuously, instead only occasionally when, for instance, engines are being serviced. Combustion occurs inside the cylindrical chamber under a controlled environment, ...
-
Manufactured by Conveco Srlbased in ITALY
HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a controlled ...
-
Manufactured by Conveco Srlbased in ITALY
The T flare is a self-supported elevated flare (open type) complete with a safety ladder and an upper platform that allow access to the nozzle and ignition and flame control equipment. The flame shield is designed to prevent accidental flame extinguishing and provides a chamber lined with fiberceramic for more complete biogas combustion. The ...
-
Manufactured by Conveco Srlbased in ITALY
Open flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation. The EMR flares family includes units for biogas flows from 10 to 250 Nm3/hr and is characterized by compact dimensions, simplified design, ease of installation. The ST version is an elevated ...
-
Manufactured by Conveco Srlbased in ITALY
Enclosed flares HE and HTE type burn biogas in a cylindric enclosure fitted with a high-resistance fiberceramic insulation lining which ensures high combustion efficiency and limitation of both rumbling and radiation. Design of the burner and of the combustion chamber as well as the selection of construction material and ancillary equipment ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you