Elevated Flare (Flares) Equipment In Europe
-
Manufactured by DWS BVBAbased in BELGIUM
As one of the most used elevated flares around the world, our flare owes its popularity to its robustness, reliability, and durability. Just like our other flares, the elevated flare is designed to work consistently at ambient temperatures varying from -15 °C to +45 °C. No weather ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
Elevated flares are vertical stacks used to dispose of waste gases through combustion; the “flare tips” (flare burners) are located at the top, which ensures personnel, plant and environment safety. ITAS elevated flares range from low-investment small utility stacks up to the tallest ...
-
Manufactured by SPG Steiner GmbHbased in GERMANY
For the combustion of average gas rates of chemical and petrochemical plants for gas rates up to appr. 1.000t/h. Applicable as well in steel works, coking plants, crude oil and natural gas extraction, storage and further specific ...
-
based in UNITED KINGDOM
This range of simple elevated flares is typically used for short term applications (such as gas pumping trials) or those where exhaust gas emissions are not subject to regulation. The combustion process is visible and the combustion temperature is not ...
-
Manufactured by Flare Products Limitedbased in UNITED KINGDOM
At the top of the elevated system is the flare tip and pilot/ignitor system. The flare tip is sized according to the flow rate and is manufactured from 304 stainless steel. The larger diameter is the windshield which helps stabilise the flame. Located adjacent is the pilot/ignitor tip. This is made in 304 stainless steel and contains the ...
-
Manufactured by Conveco Srlbased in ITALY
The T flare is a self-supported elevated flare (open type) complete with a safety ladder and an upper platform that allow access to the nozzle and ignition and flame control equipment. The flame shield is designed to prevent accidental flame extinguishing and provides a chamber lined with fiberceramic for more complete biogas combustion. The ...
-
Manufactured by Encore Thermoengineering S.R.L.based in ITALY
Derrick structure (demountable type if requested) can be the optimum solution for Flare Systems installed inside plants, when higher elevation is required to limit ground radiation and available area is limited as a result of other present equipment. The height of this type of flare can be even more than 200 ...
-
Manufactured by Europem N.Vbased in BELGIUM
Industries will generate Low CV waste gases, which are either difficult to burn or can contain insufficient energy to self-sustain the combustion process. For these applications, Nutara developed the proprietary "ring-of-fire" Flare Tip. This tip has a ring of flame around the central waste gas tip thus ensuring complete oxidation of the ...
-
Manufactured by Europem N.Vbased in BELGIUM
Since the 1980’s, key staff of Europem have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications.Europem’s extensive experience in flare design has resulted in a comprehensive range of elevated and ground ...
-
Manufactured by Europem N.Vbased in BELGIUM
Since the 1980’s, key staff of Nutara have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications. Nutara designs are optimized towards flexibility, robustness, low emissions, high thermal efficiency and ...
-
Manufactured by Europem N.Vbased in BELGIUM
Air assisted flares enable the smokeless combustion of low pressure waste gases. Air (or Gas) assisted flares can be used when no steam is available on site. Air assisted flares use forced draft Air or Gas to create turbulence ensuring that sufficient primary combustion air is supplied to the flame. The amount of air and hence the size of the ...
-
Manufactured by Europem N.Vbased in BELGIUM
Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable operation at both ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE (98%) and ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular ...
-
Manufactured by DWS BVBAbased in BELGIUM
Shielded flares cover the majority of the flame behind a heat resistant shield. The flare construction makes it possible to safely burn the gases at a lower height than the elevated flares. In addition to basic components such as self-supporting free standing flare with the combustion chamber, instrumentation, ...
-
Manufactured by Conveco Srlbased in ITALY
Open flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation. The EMR flares family includes units for biogas flows from 10 to 250 Nm3/hr and is characterized by compact dimensions, simplified design, ease of installation. The ST version is an elevated ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Triton sonic flare technology allows for safe, efficient and smokeless flaring at elevated oil and gas production rates by injecting sea water into the flame envelope. High pressure sea water injection reduces flare emissions, helps minimize overall radiation levels from the flame, abates combustion noise, and preserves flame ...
-
Manufactured by Organics Group plcbased in UNITED KINGDOM
The AC range of flare stacks is designed to offer a degree of control over the combustion process in an elevated flame burner. The burner tip design is based upon the principle of pre-aerated combustion giving the option of a short sharp, non-luminous flame, as opposed to the yellow-tipped long lazy flame typical of diffusion ...
-
based in THAILAND
All anaerobic plants must be equipped with a biogas flare, for safety reasons. GWE flares are designed to operate at low to medium pressure (<50 mbar), without the need for a biogas fan and for continuous burning in a wide range of biogas flows (5-100 %). This avoids the need for biogas storage systems (e.g. balloons) and keeps the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you