Flare Stack (Flares) Equipment
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UF10- VAB range of flares are specifically designed and used in conjunction with Parker SRS Siloxane removal plant. The unit is used to safely combust the re generation air from the Siloxane Plant and using the Uniflare Group combustion technology provides a system that uses a small amount of the gas to compliantly combust the vent ...
-
Manufactured by Biogasmetano S.r.l.based in ITALY
BGM-BIOGASMETANO Flare Stack range include open flares (ground and elevated), as well as enclosed low and high temperature flares. All flares are characterized by simple end effective design, reliable equipment and ease of installation; operation is fully automatic. The high efficiency flares, ...
-
Manufactured by Conveco Srlbased in ITALY
Open flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation. The EMR flares family includes units for biogas flows from 10 to 250 Nm3/hr and is characterized by compact dimensions, simplified design, ease of installation. The ST version is an elevated ...
-
Manufactured by Conveco Srlbased in ITALY
Enclosed flares HE and HTE type burn biogas in a cylindric enclosure fitted with a high-resistance fiberceramic insulation lining which ensures high combustion efficiency and limitation of both rumbling and radiation. Design of the burner and of the combustion chamber as well as the selection of construction material and ancillary equipment ...
-
Manufactured by Universal Analyzers - AMETEK, Incbased in USA
The Model 270F is a Flare Gas Probe Assembly consisting of the filter body mounted in a NEMA 4X stainless steel enclosure. A blowback system is provided to allow the blowback to occur on command from a data logger, PLC or UAI timer card or external switch mounted in a safe ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UFO-ENV range of flares are predominantly used on AD Plants and Waste Water Treatment Plants as emergency flares where the criteria for the flare is that it needs an invisible flame but does not need to meet emissions standards due to the hours of operation it would ever perform. Again Uniflare designs and manufactures these to our ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UF10 range of flares offer the customer a fully compliant solution to flaring of its Gas. These units have proven technology that meets the Environment Agency’s requirements in terms of emissions and are designed and procured to fully meet all requirements in terms of ATEX and DSEAR certification. The UF10 range comes in various ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
This range of equipment offers the customers either a long or short term solution to dealing with their waste gas. The UFO Range are all skid mounted for easy and rapid installation and can be easily moved around site for flaring surplus gas and carrying out pumping trials. They come in various sizes in terms of flow and range from 1 ...
-
Manufactured by Conveco Srlbased in ITALY
EMR ADV flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation but it is required that the flame is partially hidden and contained inside a combustion chamber. The multi-nozzle burner and the particular design, size and features of the combustion chamber ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UF10 Lean gas range of flares are specifically designed for the closed and declining in gas landfill sites. Uniflare’s unique burner design has 100% proven track record with emissions standards set out by the Environment Agency and their guidance on flaring LFGTN-05 these units offer a cost effective solution to controlling the ...
-
Manufactured by Alberta Flaresbased in CANADA
Flare stack: 2” Main. Height: 8' feet. Tri-fold Legs: 30” Radius. Unit weight: 50 lbs. Wind shroud: 6”. Inlet: 1”. Optionial: ½” Pilot ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UFGTP range of systems are a Turnkey solution offered by Uniflare to the gas handling and process. This includes all the equipment and pipework required to connect from an AD Plant or Wastewater Treatment Plant digester outlet through to the CHP/Boiler/Gas Upgrader/Flare Stack inlet and also includes all the equipment required to both ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UFU10 range of flares and gas utilisation equipment are generally tailored to suit the customer’s application and specific requirements and offer seamless control of the gas between its utilisation application and the flare stack. These units come in various sizes from 10 Nm3hr through to over 10,000 Nm3hr if ...
-
Manufactured by Automatic Flare Systems Limited (AFS)based in UNITED KINGDOM
The High Temperature LO-CAL range of flares offers an optimum solution for safe and efficient degassing of old landfill sites or sites with low quality gas. The innovative Lo-Cal high temperature flare is designed to provide greater gas control during the latter phases of a site. Low calorific gas high temperature combustion is necessary on ...
-
Manufactured by Alberta Flaresbased in CANADA
This unit is completely self contained. No additional equipment required to set it up. 6” main, 3” Auxiliary, 2” Shooter, 1/2” Pilot, Propane fireball ignition, 12 V hydraulic power pack, Windload rating 75 mph (120 km/h), Zero Ground Disturbance, 12V solar electronic ignition ensures continous pilot (Optional) Footprint: length 44’ (13.4 m), width 30’ (9.1 ...
-
Manufactured by Alberta Flaresbased in CANADA
Common Features: 4” x 40’ Single Tongue Tandem Axle. 4” Main, 2” Auxiliary. Zero Ground Disturbance. 12V Self-Contained Hydraulic Lift System. 7000 lb Jacks. Continuous Electronic Ignition System ...
-
Manufactured by Alberta Flaresbased in CANADA
This unit is completely self contained. No additional equipment required to set it up. 4” main, 2” Auxiliary, 2” Shooter, 1/2” Pilot, Propane fireball ignition, 12 V hydraulic power pack, Windload rating 75 mph (120 km/h), Zero Ground Disturbance, 12V solar electronic ignition ensures continous pilot ...
-
Manufactured by Alberta Flaresbased in CANADA
This unit is completely self contained. No additional equipment required to set it up. 6” main, 3” Auxiliary, 2” Shooter, 1/2” Pilot, Propane fireball ignition, 12 V hydraulic power pack, Windload rating 75 mph (120 km/h), Zero Ground Disturbance, 12V solar electronic ignition ensures continous pilot (Optional). Footprint: length 40’ (12.2 m), width 25’ (7.6 ...
-
Manufactured by Conveco Srlbased in ITALY
air is admitted through a damper. This causes a higher destruction efficiency of the biogas and eliminates visible flame and sound to provide the proper solution in sensitive areas. Standard construction is full stainless steel, including the supporting frame. The flare stack is supplied complete with gas train, control panel, flame arrestor, ...
-
Manufactured by Conveco Srlbased in ITALY
HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a controlled ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you