Flaring System (Flares) Equipment
-
PremiumManufactured by Gazpack B.V.based in NETHERLANDS
Gazpack is all aware that gas flaring is becoming a major area of concern in today’s growing market where the emphasis is hugely focused on the negative environmental impacts and how we can change these practices quickly and efficiently. Therefore Gazpack has way to shut down flares without pollution. Blended flare quencher are ...
-
based in NETHERLANDS
The flare systems are useable for flaring gases like sweet natural gas, sour natural gas and other. These flare systems are also useable as vent systems, for venting gases like ...
-
Manufactured by Organics Group plcbased in UNITED KINGDOM
The AC range of flare stacks is designed to offer a degree of control over the combustion process in an elevated flame burner. The burner tip design is based upon the principle of pre-aerated combustion giving the option of a short sharp, non-luminous flame, as opposed to the yellow-tipped long lazy flame typical of diffusion ...
-
Manufactured by Organics Group plcbased in UNITED KINGDOM
Shrouded flame flares with no visible flame and automated control of combustion air allowing a combustion temperature of 1,000ºC and 0.5 seconds retention ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility ...
-
Manufactured by Gastechnik Himmel GmbHbased in AUSTRIA
The demands on incinerators increase constantly and emission reducing measures are already counted today among directives in the disposal of various industrial gases. Due to the new market requirements - specified by EEG - we adapted our ...
-
Manufactured by Organics Group plcbased in UNITED KINGDOM
The LHC (Low Heat Content) Range flare is designed specifically to address the problem of combusting gases with low calorific values, or heat contents. The optimisation of combustion control techniques ensures that heat loss is minimised, whilst air and gas mixing is maintained at a very high level. In normal landfill gas flares, for ...
-
Manufactured by Organics Group plcbased in UNITED KINGDOM
The MC range of flare stacks provides a combustion strategy which holds the gases at 1200oC for the specified retention time. This takes to its realistic limit this form of combustion control. The key to this form of technological solution is to raise the temperature of the combustion process to 1200oC and retain the combustion ...
-
Manufactured by Europem N.Vbased in BELGIUM
Since the 1980’s, key staff of Nutara have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications. Nutara designs are optimized towards flexibility, robustness, low emissions, high thermal efficiency and ...
-
based in USA
SOLVING COMPLEX PROBLEMS for global industries is nothing new for John Zink Hamworthy Combustion. Over the years, we’ve led the advancement of flare design and clean flare technologies for upstream, downstream, and biogas flare industries, transforming yesterday’s fired equipment into sophisticated, low-emissions ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
A flare stack refers to an elevated vertical stack used for burning off unusable waste gas in a variety of oil and gas production applications. Waste gases are either uneconomical to recover/retain, or released during planned or unplanned over-pressuring of plant equipment. Waste gases are released to the flare via piping (flare header) and ...
-
Manufactured by Hofstetter BVbased in NETHERLANDS
Customised solutions for safe and environmentally-friendly disposal of industrial gas. HOFGAS-IPM is comprised of one or several blower stations and the necessary components for faultless degassing. Defined control and regulation concepts guarantee safe and efficient ...
-
Manufactured by Automatic Flare Systems Limited (AFS)based in UNITED KINGDOM
Our mobile (MB) range of open flare stacks provides a good degree of control over the combustion process in an elevated flame burner, whilst remaining highly flexible and portable. They are ideal for temporary or emergency mobile systems on landfill sites, or can be used at sewerage treatment ...
-
Manufactured by Inventive Gas Equipmentbased in INDIA
The iconic tower has redefined the London skyline and is already an international symbol for London. A mixed-use “vertical city,” it offers more than 55,000 square meters of office space on 25 floors, three floors of restaurants, a 17-story hotel, 13 floors of apartments and a triple-height viewing gallery, as well as an open-air viewing floor on level 72. It is crowned with a ...
-
Manufactured by BKE Combustion Controls Co., LTD.based in THAILAND
BKE offers both enclosed and open type flaring solutions for biogas operations of all sizes. BKE Biogas Flare Systems are designed to perform their tasks to the highest industry standards of safety and reliability. All of our flares are CDM compliant to allow for maximum carbon credit gain. BKE designs and fabricates ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
FlareWell® waste gas burners form part the anaerobic digestion process. FlareWell is designed to burn gas from the digestion process in excess of the gas necessary for the sludge heating system. The burner is automatic in operation and uses digester gas and/or LPG for pilot ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
ITAS, one of the world’s largest manufacturers of flare systems, offers complete flare control packages. ITAS experience with hundreds of flare systems ensures well-designed and proven controls ...
-
Manufactured by HiLo Group USA Inc.based in USA
Controls Flow Rate. No Visible Flame or Radiating Heat. Ceramic Lined. Cleanest Flare in Operation. Built in Safety Features. Cost Efficient. Reliable. Easy to Operate. Exceeds All Environmental ...
-
Manufactured by Prithvi Industriesbased in INDIA
Usage : Industrial, Material : Mild Steel, Automation Grade : Semi Automatic, Capacity : 2000 m3/hour, Country of Origin : Made in India, Voltage : 320 V, Frequency : 50 Hz, Power : 4 ...
-
Manufactured by BMF HAASE Energietechnik GmbHbased in GERMANY
We offer to help with short reaction times on site with our mobile flat systems on a trailer. The mobile sewage gas flares can, for instance, ensure rapid and cost-effective degassing during the renovation of gas storage ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you