Gas Flaring (Flares) Equipment In Australasia
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Since the implementation of the Kyoto treaty the industry has seen a widespread development and tightening of regulations governing greenhouse emissions for the reduction of CO emissions. The issuing of the so called CO certificate not only calls for the Methane gas to be to be burnt in gas flares according to the UNFCC regulations, but ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The low-price solution for the price-conscious farmer! Robust and compact manual gas flare for burning off biogas at agricultural biogas plants. Perfect for smaller new plants and for retro fitting to existing biogas plants. The operation of the eco gas are with a fermenter pressure of 3 mbar is possible although a minimum operating pressure of ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The NOXmatic comprises the most up-to-date quality gas are technology ensuring the safe, efficient and environmentally friendly combustion of gases from landfill, bio and sewage gas systems. Depending on the application parameters and the required combustion characteristics, the ares are supplied as either low or medium temperature units ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The modern preparation of biogas to more efficient, use and transport friendlier biomethane becomes more and more popular. During preparation of the biogas, removal of CO2 and other basic components of the gas resutls in a dramatic change of the gas specific Wobbe Index and therefore new requirements for specification of the flare burner. ...
-
Manufactured by Eneraque Pty Ltdbased in AUSTRALIA
When waste is stored in landfill sites, micro-organisms break down the waste material causing gas to be released. This gas can be extracted from disposal site and made available for use as fuel. Eneraque manufactures, installs and maintains landfill gas flares purpose built for your waste ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
FlareWell® waste gas burners form part the anaerobic digestion process. FlareWell is designed to burn gas from the digestion process in excess of the gas necessary for the sludge heating system. The burner is automatic in operation and uses digester gas and/or LPG for pilot ...
-
Manufactured by Eneraque Pty Ltdbased in AUSTRALIA
or as a reliable means for disposing industrial gases. Our high temperature industrial gas flares provide safe and environmentally-friendly combustion of industrial ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
In general the design for those flares is the same as for our standard flares. In accordance with the project-specific requirements (for example special gas composition, high gas temperatures or pollution) specific technical solutions and equipment are added. In principle all pyrolysis gas flares ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Every year, millions of tons of household garbage and other refuse are deposited in landfills around the world. Biochemical decomposition processes of organic bonds in these landfills produce up to 150 – 250 m³ of landfill gases per tonne of household garbage. Due to a methane content of up to 60%, landfill gas ranks number ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The high temperature are is the further developed NOXmatic are for the safe and low-emission combustion of land ll, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas com- ponents are fully processed, thus greatly reducing the formation of nitrogen ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Special Solutions for Preadmission Applications. The direct-drive GM ... dz blowers from AERZEN are high-performance machines. 1 or 2 stage design, with separate pressurised oil lubrication for the oil-free transport and compression of air, neutral gases, and gas mixtures. Highly advanced and extremely robust Roots-type products. ...
-
Manufactured by Gasco Pty Ltd.based in AUSTRALIA
Flares, also known as gas flares and flare stacks, are a gas combustion device used in industrial plants such as petroleum refineries, chemical plants, and natural gas processing plants as well as at oil or gas production sites having oil wells, gas wells, ...
-
Manufactured by Ennovobased in AUSTRALIA
Our high temperature (HT) flare range provides an ideal solution to meet the increasing regulation in regards to emissions from landfill and anaerobic digester gas flares. Control of the combustion gasses is critical to a successful application of this approach to meet emission standards. Biogas Systems’ high temperature systems ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate ...
-
Manufactured by Windsor Engineeringbased in NEW ZEALAND
Utilising waste gas in process heating or power generation (gas engine) is a preferred method of disposal, but sometimes it is impractical due to distance from a suitable site. Flaring gas is the best alternative in this situation. A temporary flare may also be required for co-generation standby systems and ...
-
Manufactured by Zeeco, Inc.based in USA
Flare tips you can trust. Zeeco’s high-pressure VariJet™ flare tip assembly is carefully engineered to provide years of reliable and efficient service in challenging environments. Flare tip assemblies are repeatedly subjected to extreme temperatures, highly oxidizing atmospheres, and severe wind and rain. A poorly designed ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The VariMach sonic flare tip features spring-actuated variable sonic nozzles to allow the exit area to vary with pressure, ensuring constant sonic velocity of the exiting waste gas. This industry proven technology guarantees sufficient inspiration of air to ensure 100% smokeless combustion and infinite turndown. Radiation levels are also ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you