Gas Flaring (Flares) Equipment In Canada
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301 Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
Landfill Gas Application: For landfill gas applications enclosed flame flare have been required for years for the destruction of landfill gas emissions. As more and more landfill gas is valorized through the production of electricity or the production of renewable natural gas (RNG), enclosed ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, ...
-
Distributed by Westech Industrial Ltd.based in CANADA
Precise and robust gas flow meter for flare gas or flare stack applications: Our ultrasonic gas flow measuring instrument FLOWSIC100 Flare-XT is designed for flare gas measurement or flare metering. The high-resolution measurement and innovative ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
Anaerobic Digester (AD) biogas applications: For AD biogas applications enclosed flame flares are used to burn excess biogas from the process as well as to burn the full biogas production while the downstream biogas valorization system is stopped for maintenance or emergency conditions. The exhaust gas emissions meet the most stringent ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300 Waste Gas Burner is designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential areas. ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular ...
-
Manufactured by Filtervac International Inc.based in CANADA
Meet the exacting standards of the latest Environmental code with a Canadian designed and manufactured Thermal Oxidation Waste gas flares by Canada’s leader in municipal gas ...
-
based in CANADA
Available for use on: Cold Heavy Oil Production with Sand (CHOPS), Instrument Air Compressors, Compressor Packing Vent Assemblies, Oilfield Storage Tank Vent Assemblies, Fuel Gas, Flare Lines and Incinerators, Annual Inactive SCVF Tests. The Ventsentinel is currently in its commercial testing phase. Please contact us for more ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Special Solutions for Preadmission Applications. The direct-drive GM ... dz blowers from AERZEN are high-performance machines. 1 or 2 stage design, with separate pressurised oil lubrication for the oil-free transport and compression of air, neutral gases, and gas mixtures. Highly advanced and extremely robust Roots-type products. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
Simply put – a pilot is continuous, it’s always on. The pilot flame serves to light the waste gas stream exiting the flare, or inside an incinerator, or any other combustion unit. You need to have an available fuel gas supply in order to install a continuous pilot. An ignitor (or ignition system) is an intermittent spark or flame ...
-
Manufactured by Prism Integrated Solutions Inc.based in CANADA
The Gas-Tight Tank Package is a quick and dependable method to produce your single well site or non-utilized sites during drilling programs. Our package offers more features and benefits when compared to other systems and operates under a wide range of production ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
Purge gas (or "purge flow") is required to prevent air impingement in the process header where there is little or no process flow going to the flare (as in the case of a dedicated intermittent or ESD flare). If air should enter the flare stack, a release of process gas could result in a combustible mixture ...
-
based in CANADA
carbon footprint, and monetise flared and stranded natural gas to enhance your bottom ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you