Gas Flaring (Flares) Equipment In USA
-
Manufactured by HiTemp Technology (HTT)based in USA
HiTemp has developed a system that mixes the methane stream with sufficient combustion air to maintain a consistent temperature assuring maximum destruction of any methane present in the exhaust ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301 Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
Landfill Gas Application: For landfill gas applications enclosed flame flare have been required for years for the destruction of landfill gas emissions. As more and more landfill gas is valorized through the production of electricity or the production of renewable natural gas (RNG), enclosed ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a ...
-
Manufactured by Hero Flare LLCbased in USA
When steam or electric is not available on-site, our high pressure gas assist or air assist technologies are viable options to achieve smokeless capacity. This technology can also be used to retrofit an existing flare stack that is experiencing smoke formation and outside of the environmental compliance ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, ...
-
Manufactured by LPP Combustion, LLCbased in USA
Flare-to-Power. Flare-gas Fuel for Power Generation: Free Fuel, Pollution Reduction, Emissions Reduction, Effective CO2 ...
-
Manufactured by Encore Combustionbased in USA
Suitable for use in all bio-gas applications – landfill, wastewater treatment, food processing, breweries, etc.. Provides ground based, completely hidden combustion process. Provides smokeless combustion. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater combustion ...
-
based in USA
John Zink Hamworthy Combustion designs advanced flare gas recovery systems that enable facilities requiring flare systems to achieve the benefits of near-zero flaring. Flare gas recovery can result in near 100 percent reduction of normal flaring, limiting flare ...
-
Manufactured by MRW Technologies, Inc.based in USA
Gas-assisted flares mix fuel gas with the waste gas for applications requiring smokeless operation. Our flare tips can be engineered to mix this fuel gas with both high and low-pressure waste gas streams. MRW can supply these gas-assist flares at ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
UOP Callidus Flare Gas Recovery (FGR) technology offers you an easy way to address growing environmental, commercial and public relations concerns regarding flaring and flare emissions. FGR technology gives your facility the ability to “recycle” flare gas. The system provides a direct ...
-
Manufactured by Process Insights, Inc.based in USA
ATOM Instrument offers the most versatile Total Sulfur analyzers available. The ATOM FGA-1000 is an online process analyzer utilizing patented Excimer UV Fluorescence (EUVF) technology to measure Total Sulfur in a variety of applications such as monitoring refinery flare gas and subsequent sulfur dioxide (SO2) emissions as mandated by the EPA ...
-
Manufactured by Alia Group INCbased in USA
. If there is an error of measuring range, you can only change target for satisfying correct application and it is no need to change the whole flowmeter. FEATURES Can measuring the low velocity less then 0.1 m/s It's able to measure high-temp., low-press. and low-flowrate flare gas. 4-20 mA output Hart communication Low Pressure lose The Max. temperature ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
Anaerobic Digester (AD) biogas applications: For AD biogas applications enclosed flame flares are used to burn excess biogas from the process as well as to burn the full biogas production while the downstream biogas valorization system is stopped for maintenance or emergency conditions. The exhaust gas emissions meet the most stringent ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300 Waste Gas Burner is designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential areas. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you