Smokeless Flare Equipment
-
Manufactured by MRW Technologies, Inc.based in USA
In order to utilize the same flare stack for different waste streams or streams with significant turndown, a staged flare may be the most economical option. MRW has proved itself a leader in solutions for these often-difficult applications. Our innovative flare tips and layouts allow for efficient and effective ...
-
Manufactured by Williamsonbased in USA
The Williamson Smokeless Flare Monitor (FM) utilizes proven dual-wavelength technology to monitor the ratio of carbon to available oxygen deep within the hot flare flame. This ratio value correlates to combustion efficiency and is used to adjust the flow of air or steam to smokeless flares, thus assuring ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Non-Smokeless flare tips are used where the environmental condition allows the burning of smoke producing gases. They are also used with gases which produce either no smoke or so little that smoke suppression with steam, air or high pressure gas is not required. Examples of gas used with these tips are Hydrogen, Blast Furnace waste gas, ...
-
Manufactured by MRW Technologies, Inc.based in USA
Some facilities have steam readily available and can use it to achieve smokeless combustion for their flaring needs. MRW’s time-tested and efficient steam-assisted flare tip technologies are operating successfully at petroleum refineries, chemical & petrochemical facilities, and agricultural processing plants worldwide. Our ...
-
Manufactured by MRW Technologies, Inc.based in USA
Designed for vapors from PRODUCED OIL OR WATER TANKS as well as PRODUCED GAS, MRW Non-Assist Smokeless Flares don't require forced air for smokeless combustion at infinite turndown. Vapors from multiple low-pressure tanks and high pressure sources can be controlled with a single open flame system. Built to meet 40 CFR 60.18 and ...
-
Manufactured by MRW Technologies, Inc.based in USA
Gas-assisted flares mix fuel gas with the waste gas for applications requiring smokeless operation. Our flare tips can be engineered to mix this fuel gas with both high and low-pressure waste gas streams. MRW can supply these gas-assist flares at petroleum refineries, chemical & petrochemical facilities, oil & gas ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Steam Assisted Smokeless flare tips are the most efficient flare tips utilizing external steam nozzles in addition to central steam nozzles and are suitable for sites where a general low noise flare tip is required. The Steam-Assisted Smokeless Flare tips are based on externally mixing steam ...
-
Manufactured by Zeeco, Inc.based in USA
Flare tips you can trust. Zeeco’s high-pressure VariJet™ flare tip assembly is carefully engineered to provide years of reliable and efficient service in challenging environments. Flare tip assemblies are repeatedly subjected to extreme temperatures, highly oxidizing atmospheres, and severe wind and rain. A poorly designed ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
The air assisted flare represents an effective alternative to traditional, steam-assisted smokeless flares. Significant advantages of the air-assisted design is a dramatic reduction in maintenance of the flare tip and lower operating costs.The continual flow of forced draft air cools the tip and prevents flame pull down in high ...
-
Distributed by GBA Flare Systemsbased in UNITED KINGDOM
. This is supplemented by a centre steam nozzle located within the tip body. The GBA GCT flare tip provides a good all-round solution for most low pressure smokeless flare applications. The GCT incorporates several features that greatly enhance service ...
-
Manufactured by MRW Technologies, Inc.based in USA
Horizontal pit flares designed and built by MRW are often a more economical alternative to vertical flares of the same type (see utility, air-assist smokeless, steam-assist smokeless, or gas-assist smokeless flares). These flares provide easier access to the ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Air-Assisted Smokeless Flare Tip is used for smokeless combustion applications, where the use of steam is not desired. Smokeless combustion can be obtained even with heavy unsaturated hydrocarbon gases. ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
This high duty and high smokeless capacity flare system features significantly higher surface to area relationship for waste gas exit compared to single tip designs. This design can facilitate mixing over the widest possible range of flow rates. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares ...
-
Manufactured by Zeeco, Inc.based in USA
The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. Our UF flare ...
-
Manufactured by MRW Technologies, Inc.based in USA
An effective method for achieving smokeless flare operation is to use an air-assisted flare where forced air is mixed with the waste gas. MRW has air-assisted flares operating successfully at loading terminals, landfills, ethanol plants, chemical & petrochemical facilities, oil & gas production facilities, gas processing ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Triton sonic flare technology allows for safe, efficient and smokeless flaring at elevated oil and gas production rates by injecting sea water into the flame envelope. High pressure sea water injection reduces flare emissions, helps minimize overall radiation levels from the flame, abates combustion noise, and preserves flame ...
-
Manufactured by Hilliard Emission Controls, Inc. / PURGITbased in USA
system. Ammonia, butane, propane, ethylene, VOC gases are among the cargoes we regularly flare. This picture shows a 6“ air-assisted flare system with a non-sparking blower skid. This is a smokeless flare and is designed for easy transport and quick set up. This unit is also ideal for use in temporary truck, rail or barge ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you